[Fri Jun 15 10:30:33 2012] Detection parameters:
  Position = (178.3, 335.1) = 15 11 33.74 5 45 49.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.8 +/- 16.7
  Background counts = 26.1
  Rate = 0.009 +/- 0.0009

[Fri Jun 15 10:30:34 2012] Off-axis axis estimate = 9.11'
[Fri Jun 15 13:54:53 2012] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 13:54:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 13:54:53 2012] Initial guess for spatial extent in simple fitting = 10.98"
[Fri Jun 15 13:54:53 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.984
[Fri Jun 15 13:54:53 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 10.98"
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src18.ximg exists
[Fri Jun 15 14:42:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src18.csv
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Jun 15 14:42:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src18.csv
[Fri Jun 15 14:42:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Jun 15 14:42:39 2012] Fit fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Jun 15 14:43:02 2012] Spatial fit model total counts = 213.994000, observed total counts = 214.000000
[Fri Jun 15 14:43:02 2012] Offset between fit and detection position for source 6 = 0.270837 pixels
[Fri Jun 15 14:43:02 2012] 215.236400 total counts/ 119.892000 bgd. counts: snr = 8.707632
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.270837 pixels
  Position = (178.4, 335.4) = 15 11 33.70 5 45 48.8
  Extent = 5.5 (4.3-7.0)", rotation angle = 0
  Source counts = 95.3 +/- 14.7
  Background counts = 119.9
  Rate = 0.007 +/- 0.001
[Fri Jun 15 14:43:02 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 14:43:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 14:43:02 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 14:43:02 2012] Source does appear to be extended
[Fri Jun 15 14:43:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 14:43:02 2012] Deleting source due to low Poisson probability 0.9