[Fri Jun 15 10:30:33 2012] Detection parameters:
  Position = (317.2, 327.9) = 15 10 53.27 5 45 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1691.4 +/- 55.6
  Background counts = 201.5
  Rate = 0.1 +/- 0.004

[Fri Jun 15 10:30:34 2012] Off-axis axis estimate = 2.53'
[Fri Jun 15 13:54:53 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 13:54:53 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Fri Jun 15 13:54:53 2012] source mask rpix=1.8, npix_max = 20, mask sum = 11, frac = 0.534
[Fri Jun 15 13:54:53 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.69"
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 15 14:42:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 15 14:42:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 14:42:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 15 14:42:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 15 14:42:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Jun 15 14:42:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 14:43:02 2012] Warning, spatial fit 3 centroid is now closest to src. 2
[Fri Jun 15 14:43:02 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 14:43:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 14:43:02 2012] Assessing source extent using major
[Fri Jun 15 14:43:02 2012] Source does appear to be extended
[Fri Jun 15 14:43:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 21:57:13 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 21:57:13 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Fri Jun 15 21:57:13 2012] source mask rpix=1.8, npix_max = 20, mask sum = 11, frac = 0.534
[Fri Jun 15 21:57:13 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.69"
[Fri Jun 15 23:03:43 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 15 23:03:43 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 15 23:03:43 2012] Fit fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src3 appears to have run properly
[Fri Jun 15 23:03:43 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 15 23:03:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 15 23:03:43 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 15 23:03:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Fri Jun 15 23:03:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 23:03:57 2012] Source 3 is offset by 2.701683 and 3.864843 pixels which is larger than
2 X fitted extent = 2.311917 x 2.311917, not incorporating fit results
[Fri Jun 15 23:03:57 2012] Warning, spatial fit 3 centroid is now closest to src. 19
[Fri Jun 15 23:03:57 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 11.564144 pixels away
[Fri Jun 15 23:03:57 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 23:03:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 23:03:57 2012] Assessing source extent using major
[Fri Jun 15 23:03:57 2012] Source does appear to be extended
[Fri Jun 15 23:03:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:03:57 2012] Source is confused with source 1
[Sun Jun 17 16:33:33 2012] Counts = 1691.380981, rescaling region sizes by 2.000000
[Sun Jun 17 16:33:33 2012] XMMSAS src. selection expression = ellipse(27545.612427, 28480.201324, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun Jun 17 16:33:33 2012] Writing source region out to fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun 17 16:33:33 2012] Extracting stamp from image fullrun_mos2_xmm0111270201_pi300-10000_cl_sm2.00.img.gz, (242, 253) - (392, 403)
[Sun Jun 17 16:33:33 2012] XMMSAS bgd. selection expression = annulus(27545.612427, 28480.201324, 4350.000000, 8700.000000, X, Y) && !ellipse(26639.325400, 27827.086340, 5402.880155, 5402.880155, 0.000000, X, Y) && !ellipse(27696.795105, 27718.914154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23620.651340, 23832.137600, 423.094412, 423.094412, 0.000000, X, Y) && !ellipse(24776.212433, 29412.113953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24913.355316, 27791.603546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25383.218000, 29143.880000, 1267.080036, 1267.080036, 0.000000, X, Y) && !ellipse(29088.336000, 25133.154000, 1215.088035, 1215.088035, 0.000000, X, Y) && !ellipse(25896.873749, 25456.736267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27355.220276, 30132.646423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27431.472717, 24319.733246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28882.565704, 29342.485809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28833.837952, 24501.472656, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 17 16:33:33 2012] Writing fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src3.gif
[Sun Jun 17 16:38:34 2012] Mean detx,y = (-373.21, 416.34) 
[Sun Jun 17 16:38:35 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 16:41:13 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 16:41:14 2012] Setting source spectrum file to fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 17 16:41:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun 17 16:49:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 17 16:49:11 2012] rmf not generated due to insufficient counts
[Sun Jun 17 17:10:36 2012] Updating aperture counts using extracted products
[Sun Jun 17 17:10:36 2012] Error reading totcts from fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 17 17:10:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 17:10:36 2012] Using photon index=1.80, rate=0.108, arf fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src3.arf
[Sun Jun 17 17:10:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 17:10:36 2012] Updating source flux to 1e-12
[Sun Jun 17 17:12:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting