[Fri Jun 15 10:30:34 2012] Detection parameters:
  Position = (332.0, 282.2) = 15 10 48.95 5 41 59.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.0 +/- 23.3
  Background counts = 140.7
  Rate = 0.009 +/- 0.001

[Fri Jun 15 10:30:34 2012] Off-axis axis estimate = 2.70'
[Fri Jun 15 13:54:53 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 13:54:53 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Fri Jun 15 13:54:53 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.764
[Fri Jun 15 13:54:53 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 7.78"
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src17.ximg exists
[Fri Jun 15 14:42:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src17.csv
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Jun 15 14:42:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src17.csv
[Fri Jun 15 14:42:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Jun 15 14:42:39 2012] Fit fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Jun 15 14:43:02 2012] Source 24 is offset by -5.727380 and 5.646352 pixels which is larger than
2 X fitted extent = 3.043467 x 3.043467, not incorporating fit results
[Fri Jun 15 14:43:02 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 14:43:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 14:43:02 2012] Assessing source extent using major
[Fri Jun 15 14:43:02 2012] Source does appear to be extended
[Fri Jun 15 14:43:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 21:57:13 2012] Using EEF radius (= 7.78 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 21:57:13 2012] Initial guess for spatial extent in simple fitting = 7.78"
[Fri Jun 15 21:57:13 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.764
[Fri Jun 15 21:57:13 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 7.78"
[Fri Jun 15 23:03:43 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src16.ximg exists
[Fri Jun 15 23:03:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src16.csv
[Fri Jun 15 23:03:43 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src16_1.ximg exists
[Fri Jun 15 23:03:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src16.csv
[Fri Jun 15 23:03:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 23:03:44 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Fri Jun 15 23:03:44 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Fri Jun 15 23:03:44 2012] Fit fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Fri Jun 15 23:03:57 2012] Source 24 is offset by -5.904598 and 5.652490 pixels which is larger than
2 X fitted extent = 3.800814 x 3.800814, not incorporating fit results
[Fri Jun 15 23:03:57 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 23:03:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 23:03:57 2012] Assessing source extent using major
[Fri Jun 15 23:03:57 2012] Source does appear to be extended
[Fri Jun 15 23:03:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:03:57 2012] Source is confused with source 8
[Sun Jun 17 16:33:33 2012] XMMSAS src. selection expression = ellipse(28833.837952, 24501.472656, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 17 16:33:33 2012] Writing source region out to fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src24_src.reg
[Sun Jun 17 16:33:33 2012] Extracting stamp from image fullrun_mos2_xmm0111270201_pi300-10000_cl_sm2.00.img.gz, (294, 245) - (369, 320)
[Sun Jun 17 16:33:34 2012] XMMSAS bgd. selection expression = annulus(28833.837952, 24501.472656, 1087.500000, 2175.000000, X, Y) && !ellipse(26639.325400, 27827.086340, 5402.880155, 5402.880155, 0.000000, X, Y) && !ellipse(29088.336000, 25133.154000, 1215.088035, 1215.088035, 0.000000, X, Y) && !ellipse(25896.873749, 25456.736267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27431.472717, 24319.733246, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 17 16:33:34 2012] Writing fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src24.gif
[Sun Jun 17 16:43:33 2012] Mean detx,y = (-1411.75, -3439.04) 
[Sun Jun 17 16:43:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 16:43:40 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 16:43:40 2012] Setting source spectrum file to fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Jun 17 16:43:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Sun Jun 17 17:09:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 17 17:09:37 2012] rmf not generated due to insufficient counts
[Sun Jun 17 17:10:36 2012] Updating aperture counts using extracted products
[Sun Jun 17 17:10:36 2012] Error reading totcts from fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Sun Jun 17 17:10:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 17:10:36 2012] Using photon index=1.80, rate=0.00921, arf fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src24.arf
[Sun Jun 17 17:10:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 17:10:36 2012] Updating source flux to 8.8e-14
[Sun Jun 17 17:12:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting