[Fri Jun 15 10:30:34 2012] Detection parameters:
  Position = (315.9, 280.1) = 15 10 53.65 5 41 48.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 187.7 +/- 25.2
  Background counts = 148.3
  Rate = 0.01 +/- 0.002

[Fri Jun 15 10:30:34 2012] Off-axis axis estimate = 1.83'
[Fri Jun 15 13:54:53 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 13:54:53 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Fri Jun 15 13:54:53 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Fri Jun 15 13:54:53 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.35"
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jun 15 14:42:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src13.csv
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jun 15 14:42:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src13.csv
[Fri Jun 15 14:42:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jun 15 14:42:39 2012] Fit fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Jun 15 14:43:02 2012] Source 13 is offset by -2.684727 and 4.095394 pixels which is larger than
2 X fitted extent = 0.844851 x 0.844851, not incorporating fit results
[Fri Jun 15 14:43:02 2012] Source 13 is offset by 2.058928 and 4.796221 pixels which is larger than
2 X fitted extent = 0.850354 x 0.850354, not incorporating fit results
[Fri Jun 15 14:43:02 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 14:43:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 14:43:02 2012] Assessing source extent using major
[Fri Jun 15 14:43:02 2012] Source does appear to be extended
[Fri Jun 15 14:43:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 14:43:02 2012] Source is confused with source 10
[Fri Jun 15 21:57:13 2012] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 21:57:13 2012] Initial guess for spatial extent in simple fitting = 7.35"
[Fri Jun 15 21:57:13 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.835
[Fri Jun 15 21:57:13 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 7.35"
[Fri Jun 15 23:03:43 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src12.ximg exists
[Fri Jun 15 23:03:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src12.csv
[Fri Jun 15 23:03:43 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri Jun 15 23:03:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src12.csv
[Fri Jun 15 23:03:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 23:03:43 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri Jun 15 23:03:43 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri Jun 15 23:03:43 2012] Fit fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri Jun 15 23:03:57 2012] Warning, spatial fit 12 centroid is now closest to src. 10
[Fri Jun 15 23:03:57 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 23:03:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 23:03:57 2012] Assessing source extent using major
[Fri Jun 15 23:03:57 2012] Source does appear to be extended
[Fri Jun 15 23:03:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 16:33:33 2012] XMMSAS src. selection expression = ellipse(27431.472717, 24319.733246, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun 17 16:33:33 2012] Writing source region out to fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src13_src.reg
[Sun Jun 17 16:33:33 2012] Extracting stamp from image fullrun_mos2_xmm0111270201_pi300-10000_cl_sm2.00.img.gz, (278, 243) - (353, 318)
[Sun Jun 17 16:33:33 2012] XMMSAS bgd. selection expression = annulus(27431.472717, 24319.733246, 1087.500000, 2175.000000, X, Y) && !ellipse(26639.325400, 27827.086340, 5402.880155, 5402.880155, 0.000000, X, Y) && !ellipse(29088.336000, 25133.154000, 1215.088035, 1215.088035, 0.000000, X, Y) && !ellipse(25896.873749, 25456.736267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28833.837952, 24501.472656, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 17 16:33:33 2012] Writing fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src13.gif
[Sun Jun 17 16:43:01 2012] Mean detx,y = (2.75, -3375.68) 
[Sun Jun 17 16:43:02 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 16:43:13 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 16:43:14 2012] Setting source spectrum file to fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Jun 17 16:43:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Jun 17 17:09:20 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun 17 17:09:20 2012] rmf not generated due to insufficient counts
[Sun Jun 17 17:10:36 2012] Updating aperture counts using extracted products
[Sun Jun 17 17:10:36 2012] Error reading totcts from fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Jun 17 17:10:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 17:10:36 2012] Using photon index=1.80, rate=0.0115, arf fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src13.arf
[Sun Jun 17 17:10:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 17:10:36 2012] Updating source flux to 1.1e-13
[Sun Jun 17 17:12:24 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting