[Fri Jun 15 10:30:33 2012] Detection parameters:
  Position = (307.3, 320.0) = 15 10 56.16 5 44 41.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 12274.8 +/- 136.1
  Background counts = 220.9
  Rate = 0.7 +/- 0.008

[Fri Jun 15 10:30:34 2012] Off-axis axis estimate = 1.69'
[Fri Jun 15 13:54:53 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 13:54:53 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Jun 15 13:54:53 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Fri Jun 15 13:54:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 14:42:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 14:42:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 14:42:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 14:42:39 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 14:42:39 2012] Fit fullrun_mos2_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 15 14:43:02 2012] Spatial fit model total counts = 30418.500000, observed total counts = 29641.000000
[Fri Jun 15 14:43:02 2012] Offset between fit and detection position for source 1 = 0.387679 pixels
[Fri Jun 15 14:43:02 2012] 30657.500000 total counts/ 19376.400000 bgd. counts: snr = 81.042887
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.387679 pixels
  Position = (306.9, 319.9) = 15 10 56.26 5 44 41.4
  Extent = 14.4 (14.0-14.5)", rotation angle = 0
  Source counts = 11281.1 +/- 175.1
  Background counts = 19376.4
  Rate = 0.9 +/- 0.01
[Fri Jun 15 14:43:02 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 14:43:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 14:43:02 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 14:43:02 2012] Source does appear to be extended
[Fri Jun 15 14:43:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 21:57:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 21:57:13 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 21:57:13 2012] Initial guess for spatial extent in simple fitting = 14.37"
[Fri Jun 15 21:57:13 2012] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.106
[Fri Jun 15 21:57:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.37"
[Fri Jun 15 23:03:43 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 23:03:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 23:03:43 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 23:03:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src1.csv
[Fri Jun 15 23:03:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 23:03:43 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 23:03:43 2012] fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 23:03:43 2012] Fit fullrun_mos2_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 15 23:03:57 2012] Spatial fit model total counts = 53878.900000, observed total counts = 50628.000000
[Fri Jun 15 23:03:57 2012] Offset between fit and detection position for source 1 = 0.572028 pixels
[Fri Jun 15 23:03:57 2012] 54041.000000 total counts/ 27037.400000 bgd. counts: snr = 164.224975
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.572028 pixels
  Position = (306.8, 320.4) = 15 10 56.31 5 44 43.8
  Extent = 22.5 (22.0-23.2)", rotation angle = 0
  Source counts = 27003.6 +/- 232.5
  Background counts = 27037.4
  Rate = 2 +/- 0.02
[Fri Jun 15 23:03:57 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 23:03:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 23:03:57 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 23:03:57 2012] Source does appear to be extended
[Fri Jun 15 23:03:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:03:57 2012] Source is confused with source 2
[Fri Jun 15 23:03:57 2012] Source is confused with source 3
[Sun Jun 17 16:33:33 2012] Counts = 27003.600000, rescaling region sizes by 3.000000
[Sun Jun 17 16:33:33 2012] XMMSAS src. selection expression = ellipse(26639.325400, 27827.086340, 4052.160117, 4052.160117, 0.000000, X, Y)
[Sun Jun 17 16:33:33 2012] Writing source region out to fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 17 16:33:33 2012] Extracting stamp from image fullrun_mos2_xmm0111270201_pi300-10000_cl_sm2.00.img.gz, (74, 88) - (540, 553)
[Sun Jun 17 16:33:33 2012] XMMSAS bgd. selection expression = annulus(26639.325400, 27827.086340, 20260.800583, 40521.601166, X, Y) && !ellipse(27696.795105, 27718.914154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27545.612427, 28480.201324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23620.651340, 23832.137600, 423.094412, 423.094412, 0.000000, X, Y) && !ellipse(24776.212433, 29412.113953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24913.355316, 27791.603546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25383.218000, 29143.880000, 1267.080036, 1267.080036, 0.000000, X, Y) && !ellipse(29088.336000, 25133.154000, 1215.088035, 1215.088035, 0.000000, X, Y) && !ellipse(25896.873749, 25456.736267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27355.220276, 30132.646423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27431.472717, 24319.733246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28882.565704, 29342.485809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28833.837952, 24501.472656, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 17 16:33:33 2012] Writing fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src1.gif
[Sun Jun 17 16:33:40 2012] Mean detx,y = (108.33, 7.32) 
[Sun Jun 17 16:33:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 16:36:06 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 16:36:06 2012] Setting source spectrum file to fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 17 16:36:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 17 17:10:36 2012] Updating aperture counts using extracted products
[Sun Jun 17 17:10:36 2012] Error reading totcts from fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 17 17:10:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 17:10:36 2012] Using photon index=1.80, rate=2.05, arf fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src1.arf
[Sun Jun 17 17:10:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 17:10:36 2012] Updating source flux to 1.7e-11
[Sun Jun 17 17:12:24 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Jun 17 17:13:14 2012] Reading fit data from xmm0111270201/analysis//spectral/fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jun 17 17:13:14 2012] Spectral fit parameter nH value = 6.56581e+20
[Sun Jun 17 17:13:14 2012] Spectral fit parameter PhoIndex value = 1.73556
[Sun Jun 17 17:13:14 2012] Failed to get F(0.3-8.0) from xmm0111270201/analysis//spectral/fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jun 17 17:13:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 17:13:14 2012] Using Nh = 6.6e+20, photon index=1.74, rate=2.05, arf fullrun_mos2_xmm0111270201_pi300-10000_pass1_cl_src1.arf
[Sun Jun 17 17:13:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 17:13:14 2012] Updating source flux to 1.8e-11