[Fri Jun 15 10:30:03 2012] Detection parameters:
  Position = (304.4, 340.4) = 15 10 57.00 5 46 8.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1172.3 +/- 46.4
  Background counts = 145.9
  Rate = 0.07 +/- 0.003

[Fri Jun 15 10:30:04 2012] Off-axis axis estimate = 3.07'
[Fri Jun 15 12:57:02 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 12:57:02 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Fri Jun 15 12:57:02 2012] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.966
[Fri Jun 15 12:57:02 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.96"
[Fri Jun 15 13:54:52 2012] fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun 15 13:54:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 13:54:52 2012] fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun 15 13:54:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_src3.csv
[Fri Jun 15 13:54:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 13:54:53 2012] fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun 15 13:54:53 2012] fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun 15 13:54:53 2012] Fit fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun 15 14:42:58 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.360219 pixels away
[Fri Jun 15 14:42:58 2012] Source 3 is offset by -3.685861 and 3.869284 pixels which is larger than
2 X fitted extent = 1.389297 x 1.389297, not incorporating fit results
[Fri Jun 15 14:42:58 2012] Spatial fit model total counts = 2326.200000, observed total counts = 2326.000000
[Fri Jun 15 14:42:58 2012] Offset between fit and detection position for source 3 = 6.238872 pixels
[Fri Jun 15 14:42:58 2012] Warning, changing simple spatial fit ID from 3 to 13
[Fri Jun 15 14:42:58 2012] 2205.182000 total counts/ 2011.220000 bgd. counts: snr = 4.325007
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 6.238872 pixels
  Position = (307.3, 345.9) = 15 10 56.16 5 46 34.7
  Extent = 17.0 (17.0-34.0)", rotation angle = 0
  Source counts = 194.0 +/- 47.0
  Background counts = 2011.2
  Rate = 0.01 +/- 0.004
[Fri Jun 15 14:42:58 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 14:42:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 14:42:58 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 14:42:58 2012] Source does appear to be extended
[Fri Jun 15 14:42:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 14:42:58 2012] Source is confused with source 11
[Fri Jun 15 14:42:58 2012] Source is confused with source 14
[Fri Jun 15 21:09:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 21:09:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 21:09:59 2012] Initial guess for spatial extent in simple fitting = 16.99"
[Fri Jun 15 21:09:59 2012] source mask rpix=3.9, npix_max = 77, mask sum = 72, frac = 0.927
[Fri Jun 15 21:09:59 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 16.99"
[Fri Jun 15 21:57:12 2012] fullrun_mos1_xmm0111270201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun 15 21:57:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111270201_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 21:57:12 2012] fullrun_mos1_xmm0111270201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun 15 21:57:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111270201_pi300-10000_cl_pass1_src3.csv
[Fri Jun 15 21:57:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111270201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111270201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 21:57:13 2012] fullrun_mos1_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun 15 21:57:13 2012] fullrun_mos1_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun 15 21:57:13 2012] Fit fullrun_mos1_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun 15 23:03:53 2012] Warning, spatial fit 3 centroid is now closest to src. 14
[Fri Jun 15 23:03:53 2012] Spatial fit model total counts = 4571.830000, observed total counts = 4544.000000
[Fri Jun 15 23:03:53 2012] Offset between fit and detection position for source 3 = 4.792144 pixels
[Fri Jun 15 23:03:53 2012] Warning, changing simple spatial fit ID from 3 to 12
[Fri Jun 15 23:03:53 2012] 4462.250000 total counts/ 3157.170000 bgd. counts: snr = 23.226734
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 4.792144 pixels
  Position = (308.1, 341.2) = 15 10 55.91 5 46 14.2
  Extent = 35.0 (32.4-70.0)", rotation angle = 0
  Source counts = 1305.1 +/- 66.8
  Background counts = 3157.2
  Rate = 0.1 +/- 0.005
[Fri Jun 15 23:03:53 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 23:03:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 23:03:53 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 23:03:53 2012] Source does appear to be extended
[Fri Jun 15 23:03:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 17 09:45:41 2012] Counts = 1305.080000, rescaling region sizes by 2.000000
[Sun Jun 17 09:45:41 2012] XMMSAS src. selection expression = ellipse(26757.982000, 29635.506000, 4197.816121, 4197.816121, 0.000000, X, Y)
[Sun Jun 17 09:45:41 2012] Writing source region out to fullrun_mos1_xmm0111270201_pi300-10000_pass1_cl_src3_src.reg
[Sun Jun 17 09:45:41 2012] Extracting stamp from image fullrun_mos1_xmm0111270201_pi300-10000_cl_sm2.00.img.gz, (67, 100) - (549, 582)
[Sun Jun 17 09:45:41 2012] XMMSAS bgd. selection expression = annulus(26757.982000, 29635.506000, 13992.720403, 27985.440805, X, Y) && !ellipse(26652.042800, 27837.904340, 5523.288159, 5523.288159, 0.000000, X, Y) && !ellipse(23609.220560, 23844.050200, 403.846412, 403.846412, 0.000000, X, Y) && !ellipse(27266.736115, 29785.973938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24736.822418, 28999.341858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27080.565460, 24923.755066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29345.690000, 25519.928000, 1297.936037, 1297.936037, 0.000000, X, Y) && !ellipse(25167.268000, 24650.112000, 1085.816031, 1085.816031, 0.000000, X, Y) && !ellipse(27795.806458, 24759.475128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27764.104000, 30101.939000, 1343.592039, 1343.592039, 0.000000, X, Y) && !ellipse(24177.973267, 29145.142792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26649.550000, 31456.256000, 2718.512078, 2718.512078, 0.000000, X, Y) && !ellipse(25431.460388, 33297.677643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29652.505615, 26348.374756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25869.752625, 24578.741974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28706.886000, 28939.968000, 1210.368035, 1210.368035, 0.000000, X, Y) && !ellipse(27934.199860, 24054.455994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27081.826000, 30835.338000, 1399.272040, 1399.272040, 0.000000, X, Y)
[Sun Jun 17 09:45:41 2012] Writing fullrun_mos1_xmm0111270201_pi300-10000_pass1_cl_src3.gif
[Sun Jun 17 09:47:46 2012] Mean detx,y = (729.72, -165.18) 
[Sun Jun 17 09:47:48 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 09:54:36 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 09:54:37 2012] Setting source spectrum file to fullrun_mos1_xmm0111270201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 17 09:54:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111270201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jun 17 17:10:35 2012] Updating aperture counts using extracted products
[Sun Jun 17 17:10:35 2012] Error reading totcts from fullrun_mos1_xmm0111270201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jun 17 17:10:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 17:10:35 2012] Using photon index=1.80, rate=0.0989, arf fullrun_mos1_xmm0111270201_pi300-10000_pass1_cl_src3.arf
[Sun Jun 17 17:10:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 17:10:36 2012] Updating source flux to 8.5e-13
[Sun Jun 17 17:10:37 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Sun Jun 17 17:10:37 2012] Flag c found in src. 3 procflags, skipping spectral fitting