[Fri Jun 15 10:30:03 2012] Detection parameters:
  Position = (307.9, 320.0) = 15 10 55.96 5 44 42.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11745.3 +/- 134.6
  Background counts = 168.5
  Rate = 0.7 +/- 0.008

[Fri Jun 15 10:30:04 2012] Off-axis axis estimate = 1.71'
[Fri Jun 15 12:57:02 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Jun 15 12:57:02 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Jun 15 12:57:02 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Fri Jun 15 12:57:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Jun 15 13:54:52 2012] fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun 15 13:54:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 13:54:52 2012] fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun 15 13:54:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_src1.csv
[Fri Jun 15 13:54:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 15 13:54:53 2012] fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun 15 13:54:53 2012] fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun 15 13:54:53 2012] Fit fullrun_mos1_xmm0111270201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun 15 14:42:58 2012] Spatial fit model total counts = 29245.000000, observed total counts = 29245.000000
[Fri Jun 15 14:42:58 2012] Offset between fit and detection position for source 1 = 0.681569 pixels
[Fri Jun 15 14:42:58 2012] 29306.800000 total counts/ 18550.700000 bgd. counts: snr = 78.972281
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.681569 pixels
  Position = (307.3, 319.9) = 15 10 56.16 5 44 41.7
  Extent = 14.3 (13.9-14.6)", rotation angle = 0
  Source counts = 10756.1 +/- 171.2
  Background counts = 18550.7
  Rate = 0.8 +/- 0.01
[Fri Jun 15 14:42:58 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 14:42:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 14:42:58 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 14:42:58 2012] Source does appear to be extended
[Fri Jun 15 14:42:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 21:09:59 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 15 21:09:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun 15 21:09:59 2012] Initial guess for spatial extent in simple fitting = 14.34"
[Fri Jun 15 21:09:59 2012] source mask rpix=3.3, npix_max = 57, mask sum = 64, frac = 1.110
[Fri Jun 15 21:09:59 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 14.34"
[Fri Jun 15 21:57:12 2012] fullrun_mos1_xmm0111270201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun 15 21:57:12 2012] fullrun_mos1_xmm0111270201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun 15 21:57:12 2012] Fit fullrun_mos1_xmm0111270201_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Jun 15 21:57:13 2012] fullrun_mos1_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun 15 21:57:13 2012] fullrun_mos1_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun 15 21:57:13 2012] Fit fullrun_mos1_xmm0111270201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun 15 23:03:53 2012] Spatial fit model total counts = 52417.000000, observed total counts = 52420.000000
[Fri Jun 15 23:03:53 2012] Offset between fit and detection position for source 1 = 0.696731 pixels
[Fri Jun 15 23:03:53 2012] 52654.600000 total counts/ 26043.300000 bgd. counts: snr = 164.899024
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.696731 pixels
  Position = (306.9, 320.5) = 15 10 56.26 5 44 44.3
  Extent = 23.0 (22.4-23.6)", rotation angle = 0
  Source counts = 26611.3 +/- 229.5
  Background counts = 26043.3
  Rate = 2 +/- 0.02
[Fri Jun 15 23:03:53 2012] Vigneting correction estimate = 1.000000
[Fri Jun 15 23:03:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 15 23:03:53 2012] Assessing source extent using major axis lower bound
[Fri Jun 15 23:03:53 2012] Source does appear to be extended
[Fri Jun 15 23:03:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 15 23:03:53 2012] Source is confused with source 3
[Sun Jun 17 09:45:41 2012] Counts = 26611.300000, rescaling region sizes by 3.000000
[Sun Jun 17 09:45:41 2012] XMMSAS src. selection expression = ellipse(26652.042800, 27837.904340, 4142.466119, 4142.466119, 0.000000, X, Y)
[Sun Jun 17 09:45:41 2012] Writing source region out to fullrun_mos1_xmm0111270201_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 17 09:45:41 2012] Extracting stamp from image fullrun_mos1_xmm0111270201_pi300-10000_cl_sm2.00.img.gz, (69, 82) - (545, 559)
[Sun Jun 17 09:45:41 2012] XMMSAS bgd. selection expression = annulus(26652.042800, 27837.904340, 20712.330596, 41424.661192, X, Y) && !ellipse(23609.220560, 23844.050200, 403.846412, 403.846412, 0.000000, X, Y) && !ellipse(26757.982000, 29635.506000, 2798.544081, 2798.544081, 0.000000, X, Y) && !ellipse(27266.736115, 29785.973938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24736.822418, 28999.341858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27080.565460, 24923.755066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29345.690000, 25519.928000, 1297.936037, 1297.936037, 0.000000, X, Y) && !ellipse(25167.268000, 24650.112000, 1085.816031, 1085.816031, 0.000000, X, Y) && !ellipse(27795.806458, 24759.475128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27764.104000, 30101.939000, 1343.592039, 1343.592039, 0.000000, X, Y) && !ellipse(24177.973267, 29145.142792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26649.550000, 31456.256000, 2718.512078, 2718.512078, 0.000000, X, Y) && !ellipse(25431.460388, 33297.677643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29652.505615, 26348.374756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25869.752625, 24578.741974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28706.886000, 28939.968000, 1210.368035, 1210.368035, 0.000000, X, Y) && !ellipse(27934.199860, 24054.455994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27081.826000, 30835.338000, 1399.272040, 1399.272040, 0.000000, X, Y)
[Sun Jun 17 09:45:41 2012] Writing fullrun_mos1_xmm0111270201_pi300-10000_pass1_cl_src1.gif
[Sun Jun 17 09:45:49 2012] Mean detx,y = (261.30, -227.26) 
[Sun Jun 17 09:45:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 17 09:47:27 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 17 09:47:28 2012] Setting source spectrum file to fullrun_mos1_xmm0111270201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 17 09:47:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111270201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 17 17:10:35 2012] Updating aperture counts using extracted products
[Sun Jun 17 17:10:35 2012] Error reading totcts from fullrun_mos1_xmm0111270201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 17 17:10:35 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 17:10:35 2012] Using photon index=1.80, rate=2.02, arf fullrun_mos1_xmm0111270201_pi300-10000_pass1_cl_src1.arf
[Sun Jun 17 17:10:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 17:10:35 2012] Updating source flux to 1.7e-11
[Sun Jun 17 17:10:37 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Jun 17 17:12:24 2012] Reading fit data from xmm0111270201/analysis//spectral/fullrun_mos1_xmm0111270201_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jun 17 17:12:24 2012] Spectral fit parameter nH value = 6.11061e+20
[Sun Jun 17 17:12:24 2012] Spectral fit parameter PhoIndex value = 1.68529
[Sun Jun 17 17:12:24 2012] Failed to get F(0.3-8.0) from xmm0111270201/analysis//spectral/fullrun_mos1_xmm0111270201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jun 17 17:12:24 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 17 17:12:24 2012] Using Nh = 6.1e+20, photon index=1.69, rate=2.02, arf fullrun_mos1_xmm0111270201_pi300-10000_pass1_cl_src1.arf
[Sun Jun 17 17:12:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 17 17:12:24 2012] Updating source flux to 1.9e-11