[Fri Sep 7 17:04:53 2012] Detection parameters: Position = (287.2, 299.8) = 21 53 34.09 17 42 39.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 835.7 +/- 40.1 Background counts = 90.7 Rate = 0.04 +/- 0.002 [Fri Sep 7 17:04:53 2012] Off-axis axis estimate = 0.82' [Fri Sep 7 18:06:57 2012] Using EEF radius (= 6.84 ")to estimate initial spatial extent for simple fitting [Fri Sep 7 18:06:57 2012] Initial guess for spatial extent in simple fitting = 6.84" [Fri Sep 7 18:06:57 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.932 [Fri Sep 7 18:06:57 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 6.84" [Fri Sep 7 18:53:44 2012] fullrun_mos2_xmm0111270101_pi300-10000_cl_pass0_src2.ximg exists [Fri Sep 7 18:53:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270101_pi300-10000_cl_pass0_src2.csv [Fri Sep 7 18:53:44 2012] fullrun_mos2_xmm0111270101_pi300-10000_cl_pass0_src2_1.ximg exists [Fri Sep 7 18:53:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270101_pi300-10000_cl_pass0_src2.csv [Fri Sep 7 18:53:44 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0111270101_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0111270101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Sep 7 18:53:45 2012] fullrun_mos2_xmm0111270101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Fri Sep 7 18:53:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270101_pi300-10000_cl_pass0_tfrozen_src2.csv [Fri Sep 7 18:53:45 2012] fullrun_mos2_xmm0111270101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Fri Sep 7 18:53:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111270101_pi300-10000_cl_pass0_tfrozen_src2.csv [Fri Sep 7 18:53:45 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0111270101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0111270101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Sep 7 18:53:56 2012] Spatial fit model total counts = 4283.440000, observed total counts = 3570.000000 [Fri Sep 7 18:53:56 2012] Poor agreement between spatial fit and data for source 3 It may help to tweak spatial fit manually Not incorporating fit results [Fri Sep 7 18:53:56 2012] Source 3 is offset by 4.501652 and -3.457860 pixels which is larger than 2 X fitted extent = 1.431559 x 1.431559, not incorporating fit results [Fri Sep 7 18:53:56 2012] Vigneting correction estimate = 1.000000 [Fri Sep 7 18:53:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Sep 7 18:53:56 2012] Assessing source extent using major [Fri Sep 7 18:53:56 2012] Source does appear to be extended [Fri Sep 7 18:53:56 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Sep 7 19:59:07 2012] Using EEF radius (= 6.84 ")to estimate initial spatial extent for simple fitting [Fri Sep 7 19:59:07 2012] Initial guess for spatial extent in simple fitting = 6.84" [Fri Sep 7 19:59:07 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.932 [Fri Sep 7 19:59:07 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.84" [Fri Sep 7 20:30:42 2012] fullrun_mos2_xmm0111270101_pi300-10000_cl_pass1_src2.ximg exists [Fri Sep 7 20:30:42 2012] fullrun_mos2_xmm0111270101_pi300-10000_cl_pass1_src2_1.ximg exists [Fri Sep 7 20:30:42 2012] Fit fullrun_mos2_xmm0111270101_pi300-10000_cl_pass1_src2 appears to have run properly [Fri Sep 7 20:30:43 2012] fullrun_mos2_xmm0111270101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Fri Sep 7 20:30:43 2012] fullrun_mos2_xmm0111270101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Fri Sep 7 20:30:43 2012] Fit fullrun_mos2_xmm0111270101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly [Fri Sep 7 20:30:52 2012] Source 3 is offset by -2.738095 and 0.846347 pixels which is larger than 2 X fitted extent = 1.433471 x 1.433471, not incorporating fit results [Fri Sep 7 20:30:52 2012] Spatial fit model total counts = 3673.420000, observed total counts = 3570.000000 [Fri Sep 7 20:30:52 2012] Offset between fit and detection position for source 3 = 5.946175 pixels [Fri Sep 7 20:30:52 2012] 3430.009000 total counts/ 2941.130000 bgd. counts: snr = 9.014555 Spatial fit parameters: Offset between fit and detection position for source 3 = 5.946175 pixels Position = (284.2, 294.7) = 21 53 35.02 17 42 15.6 Extent = 13.7 (13.6-27.4)", rotation angle = 0 Source counts = 488.9 +/- 58.6 Background counts = 2941.1 Rate = 0.03 +/- 0.003 [Fri Sep 7 20:30:52 2012] Spatial fit model total counts = 2118.110000, observed total counts = 1851.000000 [Fri Sep 7 20:30:52 2012] Poor agreement between spatial fit and data for source 3 It may help to tweak spatial fit manually Not incorporating fit results [Fri Sep 7 20:30:52 2012] Vigneting correction estimate = 1.000000 [Fri Sep 7 20:30:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri Sep 7 20:30:52 2012] Assessing source extent using major axis lower bound [Fri Sep 7 20:30:52 2012] Source does appear to be extended [Fri Sep 7 20:30:52 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Fri Sep 7 20:30:52 2012] Source is confused with source 1 [Fri Sep 7 20:52:54 2012] XMMSAS src. selection expression = ellipse(24674.762000, 25591.470000, 820.548024, 820.548024, 0.000000, X, Y) [Fri Sep 7 20:52:54 2012] Writing source region out to fullrun_mos2_xmm0111270101_pi300-10000_pass1_cl_src3_src.reg [Fri Sep 7 20:52:54 2012] Extracting stamp from image fullrun_mos2_xmm0111270101_pi300-10000_cl_sm2.00.img.gz, (237, 248) - (331, 342) [Fri Sep 7 20:52:54 2012] XMMSAS bgd. selection expression = annulus(24674.762000, 25591.470000, 1367.580039, 2735.160079, X, Y) && !ellipse(24182.749400, 24908.969800, 1135.688033, 859.704025, 331.261000, X, Y) && !ellipse(23046.569400, 27971.415400, 370.374539, 370.374539, 0.000000, X, Y) && !ellipse(23530.706329, 25892.057526, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23009.802856, 25523.919128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22287.249908, 24489.408203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23787.073303, 26382.571533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21796.662888, 25178.945862, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23997.064880, 26844.549286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26847.688000, 25383.369400, 1070.376031, 1070.376031, 0.000000, X, Y) && !ellipse(26216.711853, 24924.936554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25665.171997, 24061.998932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26715.216000, 26616.548000, 1061.328031, 1061.328031, 0.000000, X, Y) && !ellipse(22037.926727, 26422.519104, 870.000000, 870.000000, 0.000000, X, Y) [Fri Sep 7 20:52:54 2012] Writing fullrun_mos2_xmm0111270101_pi300-10000_pass1_cl_src3.gif [Fri Sep 7 20:56:09 2012] Mean detx,y = (327.58, -478.66) [Fri Sep 7 20:56:10 2012] Setting backscal keywords in source and bgd. spectrum [Fri Sep 7 20:56:15 2012] grppha failed [Fri Sep 7 20:56:15 2012] Setting source spectrum file to fullrun_mos2_xmm0111270101_pi300-10000_pass1_cl_src3_src.pi.gz [Fri Sep 7 20:56:15 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111270101_pi300-10000_pass1_cl_src3_bgd.pi.gz [Fri Sep 7 20:59:27 2012] Updating aperture counts using extracted products [Fri Sep 7 20:59:27 2012] Error reading totcts from fullrun_mos2_xmm0111270101_pi300-10000_pass1_cl_src3_src.pi.gz [Fri Sep 7 20:59:27 2012] No arf file for this source, not re-computing flux [Fri Sep 7 20:59:29 2012] Flag b found in src. 3 procflags, skipping spectral fitting [Fri Sep 7 20:59:29 2012] Flag p found in src. 3 procflags, skipping spectral fitting [Fri Sep 7 20:59:29 2012] Flag c found in src. 3 procflags, skipping spectral fitting [Fri Sep 7 20:59:29 2012] Source 3 has no response, skipping [Fri Sep 7 20:59:30 2012] xmm0111270101/analysis//spectral/fullrun_mos2_xmm0111270101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete