[Fri Sep  7 17:04:37 2012] Detection parameters:
  Position = (391.9, 437.6) = 21 53 2.20 17 52 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.0 +/- 14.0
  Background counts = 28.2
  Rate = 0.003 +/- 0.0006

[Fri Sep  7 17:04:38 2012] Off-axis axis estimate = 12.15'
[Fri Sep  7 17:29:51 2012] Using EEF radius (= 12.51 ")to estimate initial spatial extent for simple fitting
[Fri Sep  7 17:29:51 2012] Initial guess for spatial extent in simple fitting = 12.51"
[Fri Sep  7 17:29:51 2012] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.922
[Fri Sep  7 17:29:51 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 12.51"
[Fri Sep  7 18:06:56 2012] fullrun_mos1_xmm0111270101_pi300-10000_cl_pass0_src23.ximg exists
[Fri Sep  7 18:06:56 2012] fullrun_mos1_xmm0111270101_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Sep  7 18:06:56 2012] Fit fullrun_mos1_xmm0111270101_pi300-10000_cl_pass0_src23 appears to have run properly
[Fri Sep  7 18:06:57 2012] fullrun_mos1_xmm0111270101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Sep  7 18:06:57 2012] fullrun_mos1_xmm0111270101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Sep  7 18:06:57 2012] Fit fullrun_mos1_xmm0111270101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Sep  7 18:53:53 2012] Spatial fit model total counts = 244.207000, observed total counts = 244.000000
[Fri Sep  7 18:53:53 2012] Offset between fit and detection position for source 4 = 4.202363 pixels
[Fri Sep  7 18:53:53 2012] 240.122000 total counts/ 111.429000 bgd. counts: snr = 12.191463
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 4.202363 pixels
  Position = (390.6, 441.6) = 21 53 2.59 17 52 54.5
  Extent = 25.0 (25.0-50.0)" x 14.9 (7.9-22.1)", rotation angle = 59 (113-269) degrees
  Source counts = 128.7 +/- 15.5
  Background counts = 111.4
  Rate = 0.007 +/- 0.0009
[Fri Sep  7 18:53:53 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 18:53:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 18:53:53 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 18:53:53 2012] Source does appear to be extended
[Fri Sep  7 18:53:53 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Fri Sep  7 19:13:02 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep  7 19:13:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Sep  7 19:13:02 2012] Initial guess for spatial extent in simple fitting = 19.98"
[Fri Sep  7 19:13:02 2012] source mask rpix=4.6, npix_max = 103, mask sum = 100, frac = 0.964
[Fri Sep  7 19:13:02 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 19.98"
[Fri Sep  7 19:59:07 2012] fullrun_mos1_xmm0111270101_pi300-10000_cl_pass1_src20.ximg exists
[Fri Sep  7 19:59:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111270101_pi300-10000_cl_pass1_src20.csv
[Fri Sep  7 19:59:07 2012] fullrun_mos1_xmm0111270101_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Sep  7 19:59:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111270101_pi300-10000_cl_pass1_src20.csv
[Fri Sep  7 19:59:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111270101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111270101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 19:59:07 2012] fullrun_mos1_xmm0111270101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Sep  7 19:59:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111270101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Sep  7 19:59:07 2012] fullrun_mos1_xmm0111270101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Sep  7 19:59:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111270101_pi300-10000_cl_pass1_tfrozen_src20.csv
[Fri Sep  7 19:59:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111270101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111270101_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep  7 20:30:49 2012] Warning, spatial fit 15 centroid is now closest to src. 6
[Fri Sep  7 20:30:49 2012] Warning, spatial fit 20 centroid is now closest to src. 9
[Fri Sep  7 20:30:49 2012] Vigneting correction estimate = 1.000000
[Fri Sep  7 20:30:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep  7 20:30:49 2012] Assessing source extent using major axis lower bound
[Fri Sep  7 20:30:49 2012] Source does appear to be extended
[Fri Sep  7 20:30:49 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.13
[Fri Sep  7 20:40:45 2012] XMMSAS src. selection expression = ellipse(33936.730400, 38372.974000, 1500.684043, 896.778026, 58.762815, X, Y)
[Fri Sep  7 20:40:45 2012] Writing source region out to fullrun_mos1_xmm0111270101_pi300-10000_pass1_cl_src4_src.reg
[Fri Sep  7 20:40:45 2012] Extracting stamp from image fullrun_mos1_xmm0111270101_pi300-10000_cl_sm2.00.img.gz, (304, 355) - (477, 528)
[Fri Sep  7 20:40:45 2012] XMMSAS bgd. selection expression = annulus(33936.730400, 38372.974000, 2501.140072, 5002.280144, X, Y)
[Fri Sep  7 20:40:45 2012] Writing fullrun_mos1_xmm0111270101_pi300-10000_pass1_cl_src4.gif
[Fri Sep  7 20:52:30 2012] Mean detx,y = (-15990.60, -1729.90) 
[Fri Sep  7 20:52:30 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Sep  7 20:52:51 2012] grppha failed
[Fri Sep  7 20:52:51 2012] Setting source spectrum file to fullrun_mos1_xmm0111270101_pi300-10000_pass1_cl_src4_src.pi.gz
[Fri Sep  7 20:52:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111270101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Sep  7 20:59:27 2012] Updating aperture counts using extracted products
[Fri Sep  7 20:59:27 2012] Error reading totcts from fullrun_mos1_xmm0111270101_pi300-10000_pass1_cl_src4_src.pi.gz
[Fri Sep  7 20:59:27 2012] No arf file for this source, not re-computing flux
[Fri Sep  7 20:59:28 2012] Source 4 has no response, skipping
[Fri Sep  7 20:59:29 2012] xmm0111270101/analysis//spectral/fullrun_mos1_xmm0111270101_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete