[Thu Aug 23 10:15:36 2012] Detection parameters:
  Position = (193.6, 236.8) = 14 31 2.83 42 1 49.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.8 +/- 8.3
  Background counts = 3.8
  Rate = 0.005 +/- 0.0009

[Thu Aug 23 10:15:36 2012] Off-axis axis estimate = 8.81'
[Thu Aug 23 11:54:03 2012] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 11:54:03 2012] Initial guess for spatial extent in simple fitting = 10.84"
[Thu Aug 23 11:54:03 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.006
[Thu Aug 23 11:54:03 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 10.84"
[Thu Aug 23 12:29:01 2012] fullrun_mos2_xmm0111260701_pi300-10000_cl_pass0_src8.ximg exists
[Thu Aug 23 12:29:01 2012] fullrun_mos2_xmm0111260701_pi300-10000_cl_pass0_src8_1.ximg exists
[Thu Aug 23 12:29:01 2012] Fit fullrun_mos2_xmm0111260701_pi300-10000_cl_pass0_src8 appears to have run properly
[Thu Aug 23 12:29:01 2012] fullrun_mos2_xmm0111260701_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Thu Aug 23 12:29:01 2012] fullrun_mos2_xmm0111260701_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Thu Aug 23 12:29:01 2012] Fit fullrun_mos2_xmm0111260701_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Thu Aug 23 12:29:19 2012] Spatial fit model total counts = 84.108600, observed total counts = 77.000000
[Thu Aug 23 12:29:19 2012] Offset between fit and detection position for source 19 = 0.140588 pixels
[Thu Aug 23 12:29:19 2012] 87.473300 total counts/ 58.796900 bgd. counts: snr = 3.739792
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.140588 pixels
  Position = (193.8, 236.8) = 14 31 2.79 42 1 49.2
  Extent = 4.7 (2.7-7.1)", rotation angle = 0
  Source counts = 28.7 +/- 9.4
  Background counts = 58.8
  Rate = 0.002 +/- 0.0007
[Thu Aug 23 12:29:19 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 12:29:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 12:29:19 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 12:29:19 2012] Source does appear to be extended
[Thu Aug 23 12:29:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 13:39:54 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug 23 13:39:54 2012] Initial guess for spatial extent in simple fitting = 4.68"
[Thu Aug 23 13:39:54 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.905
[Thu Aug 23 13:39:54 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 4.68"
[Thu Aug 23 14:05:35 2012] fullrun_mos2_xmm0111260701_pi300-10000_cl_pass1_src8.ximg exists
[Thu Aug 23 14:05:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111260701_pi300-10000_cl_pass1_src8.csv
[Thu Aug 23 14:05:35 2012] fullrun_mos2_xmm0111260701_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Aug 23 14:05:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111260701_pi300-10000_cl_pass1_src8.csv
[Thu Aug 23 14:05:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111260701_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111260701_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 14:05:35 2012] fullrun_mos2_xmm0111260701_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Aug 23 14:05:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111260701_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Aug 23 14:05:35 2012] fullrun_mos2_xmm0111260701_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Aug 23 14:05:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111260701_pi300-10000_cl_pass1_tfrozen_src8.csv
[Thu Aug 23 14:05:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111260701_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111260701_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 14:05:48 2012] Spatial fit model total counts = 89.446000, observed total counts = 80.000000
[Thu Aug 23 14:05:48 2012] Poor agreement between spatial fit and data for source 19
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug 23 14:05:48 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 14:05:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 14:05:48 2012] Assessing source extent using major axis lower bound
[Thu Aug 23 14:05:48 2012] Source does appear to be extended
[Thu Aug 23 14:05:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 14:35:22 2012] XMMSAS src. selection expression = ellipse(16809.123400, 20549.398200, 280.991595, 280.991595, 0.000000, X, Y)
[Thu Aug 23 14:35:22 2012] Writing source region out to fullrun_mos2_xmm0111260701_pi300-10000_pass1_cl_src19_src.reg
[Thu Aug 23 14:35:22 2012] Extracting stamp from image fullrun_mos2_xmm0111260701_pi300-10000_cl_sm2.00.img.gz, (178, 221) - (210, 253)
[Thu Aug 23 14:35:22 2012] XMMSAS bgd. selection expression = annulus(16809.123400, 20549.398200, 468.319326, 936.638652, X, Y)
[Thu Aug 23 14:35:22 2012] Writing fullrun_mos2_xmm0111260701_pi300-10000_pass1_cl_src19.gif
[Thu Aug 23 14:36:56 2012] Mean detx,y = (-9227.22, 140.97) 
[Thu Aug 23 14:36:57 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug 23 14:37:03 2012] grppha failed
[Thu Aug 23 14:37:03 2012] Setting source spectrum file to fullrun_mos2_xmm0111260701_pi300-10000_pass1_cl_src19_src.pi.gz
[Thu Aug 23 14:37:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111260701_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Thu Aug 23 14:39:38 2012] Not generating rmf since there are only 28 counts
[Thu Aug 23 14:39:38 2012] rmf not generated due to insufficient counts
[Thu Aug 23 14:39:58 2012] Updating aperture counts using extracted products
[Thu Aug 23 14:39:58 2012] Error reading totcts from fullrun_mos2_xmm0111260701_pi300-10000_pass1_cl_src19_src.pi.gz
[Thu Aug 23 14:39:58 2012] No arf file for this source, not re-computing flux
[Thu Aug 23 14:40:00 2012] Flag p found in src. 19 procflags, skipping spectral fitting
[Thu Aug 23 14:40:00 2012] Source 19 has fewer than 100.000000 counts, skipping spectral fitting
[Thu Aug 23 14:40:01 2012] xmm0111260701/analysis//spectral/fullrun_mos2_xmm0111260701_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete