[Thu Aug 23 10:15:08 2012] Detection parameters:
  Position = (300.4, 288.2) = 14 30 21.17 42 5 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.1 +/- 8.3
  Background counts = 4.8
  Rate = 0.003 +/- 0.0006

[Thu Aug 23 10:15:08 2012] Off-axis axis estimate = 0.75'
[Thu Aug 23 11:16:29 2012] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 11:16:29 2012] Initial guess for spatial extent in simple fitting = 6.81"
[Thu Aug 23 11:16:29 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.939
[Thu Aug 23 11:16:29 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 6.81"
[Thu Aug 23 11:54:03 2012] fullrun_mos1_xmm0111260701_pi300-10000_cl_pass0_src17.ximg exists
[Thu Aug 23 11:54:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111260701_pi300-10000_cl_pass0_src17.csv
[Thu Aug 23 11:54:03 2012] fullrun_mos1_xmm0111260701_pi300-10000_cl_pass0_src17_1.ximg exists
[Thu Aug 23 11:54:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111260701_pi300-10000_cl_pass0_src17.csv
[Thu Aug 23 11:54:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111260701_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111260701_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 11:54:03 2012] fullrun_mos1_xmm0111260701_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Thu Aug 23 11:54:03 2012] fullrun_mos1_xmm0111260701_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Thu Aug 23 11:54:03 2012] Fit fullrun_mos1_xmm0111260701_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Thu Aug 23 12:29:16 2012] Source 19 is offset by 6.608668 and -7.030085 pixels which is larger than
2 X fitted extent = 6.257563 x 6.257563, not incorporating fit results
[Thu Aug 23 12:29:16 2012] Vigneting correction estimate = 1.000000
[Thu Aug 23 12:29:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug 23 12:29:16 2012] Assessing source extent using major
[Thu Aug 23 12:29:16 2012] Source does appear to be extended
[Thu Aug 23 12:29:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug 23 13:11:55 2012] Using EEF radius (= 6.81 ")to estimate initial spatial extent for simple fitting
[Thu Aug 23 13:11:55 2012] Initial guess for spatial extent in simple fitting = 6.81"
[Thu Aug 23 13:11:55 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.939
[Thu Aug 23 13:11:55 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 6.81"
[Thu Aug 23 13:39:53 2012] fullrun_mos1_xmm0111260701_pi300-10000_cl_pass1_src16.ximg exists
[Thu Aug 23 13:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111260701_pi300-10000_cl_pass1_src16.csv
[Thu Aug 23 13:39:53 2012] fullrun_mos1_xmm0111260701_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Aug 23 13:39:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111260701_pi300-10000_cl_pass1_src16.csv
[Thu Aug 23 13:39:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111260701_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111260701_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug 23 13:39:54 2012] fullrun_mos1_xmm0111260701_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Aug 23 13:39:54 2012] fullrun_mos1_xmm0111260701_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Aug 23 13:39:54 2012] Fit fullrun_mos1_xmm0111260701_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Thu Aug 23 14:05:45 2012] Spatial fit model total counts = 125.591000, observed total counts = 126.000000
[Thu Aug 23 14:05:45 2012] Offset between fit and detection position for source 19 = 0.072766 pixels
[Thu Aug 23 14:05:45 2012] 118.336700 total counts/ 101.238000 bgd. counts: snr = 1.699383
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.072766 pixels
  Position = (300.4, 288.2) = 14 30 21.15 42 5 33.5
  Extent = 2.7 (1.7-5.1)", rotation angle = 0
  Source counts = 17.1 +/- 10.9
  Background counts = 101.2
  Rate = 0.001 +/- 0.0008
  Deleting source due to low Poisson probability