[Sun Sep 25 22:15:47 2011] Detection parameters:
  Position = (397.5, 359.2) = 15 8 58.96 57 6 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.4 +/- 7.8
  Background counts = 5.6
  Rate = 0.005 +/- 0.001

[Sun Sep 25 22:15:47 2011] Off-axis axis estimate = 8.43'
[Sun Sep 25 22:47:25 2011] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 22:47:25 2011] Initial guess for spatial extent in simple fitting = 10.64"
[Sun Sep 25 22:47:25 2011] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.864
[Sun Sep 25 22:47:25 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 10.64"
[Sun Sep 25 23:04:42 2011] fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_src5.ximg exists
[Sun Sep 25 23:04:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_src5.csv
[Sun Sep 25 23:04:42 2011] fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun Sep 25 23:04:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_src5.csv
[Sun Sep 25 23:04:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 23:04:42 2011] fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun Sep 25 23:04:42 2011] fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun Sep 25 23:04:42 2011] Fit fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun Sep 25 23:19:23 2011] Spatial fit model total counts = 69.999700, observed total counts = 70.000000
[Sun Sep 25 23:19:23 2011] Offset between fit and detection position for source 8 = 0.135762 pixels
[Sun Sep 25 23:19:23 2011] 70.688600 total counts/ 44.811300 bgd. counts: snr = 3.865674
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.135762 pixels
  Position = (397.4, 359.1) = 15 8 59.01 57 6 24.5
  Extent = 5.9 (4.1-8.4)", rotation angle = 0
  Source counts = 25.9 +/- 8.4
  Background counts = 44.8
  Rate = 0.002 +/- 0.0007
[Sun Sep 25 23:19:23 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 23:19:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 23:19:23 2011] Assessing source extent using major axis lower bound
[Sun Sep 25 23:19:23 2011] Source does appear to be extended
[Sun Sep 25 23:19:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 23:52:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep 25 23:52:05 2011] Initial guess for spatial extent in simple fitting = 5.94"
[Sun Sep 25 23:52:05 2011] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.863
[Sun Sep 25 23:52:05 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 5.94"
[Mon Sep 26 00:12:18 2011] fullrun_mos1_xmm0111260201_pi300-10000_cl_pass1_src5.ximg exists
[Mon Sep 26 00:12:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111260201_pi300-10000_cl_pass1_src5.csv
[Mon Sep 26 00:12:18 2011] fullrun_mos1_xmm0111260201_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Sep 26 00:12:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111260201_pi300-10000_cl_pass1_src5.csv
[Mon Sep 26 00:12:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111260201_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111260201_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Sep 26 00:12:18 2011] fullrun_mos1_xmm0111260201_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Sep 26 00:12:18 2011] fullrun_mos1_xmm0111260201_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Sep 26 00:12:18 2011] Fit fullrun_mos1_xmm0111260201_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Sep 26 00:28:59 2011] Warning, spatial fit 5 centroid is now closest to src. 2
[Mon Sep 26 00:28:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 00:28:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 00:28:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 00:28:59 2011] Source does appear to be extended
[Mon Sep 26 00:28:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 00:50:36 2011] XMMSAS src. selection expression = ellipse(34524.160600, 31197.435400, 356.169610, 356.169610, 0.000000, X, Y)
[Mon Sep 26 00:50:36 2011] Writing source region out to fullrun_mos1_xmm0111260201_pi300-10000_pass1_cl_src8_src.reg
[Mon Sep 26 00:50:36 2011] Extracting stamp from image fullrun_mos1_xmm0111260201_pi300-10000_cl_sm2.00.img.gz, (377, 339) - (418, 380)
[Mon Sep 26 00:50:36 2011] XMMSAS bgd. selection expression = annulus(34524.160600, 31197.435400, 593.616017, 1187.232034, X, Y)
[Mon Sep 26 00:50:36 2011] Writing fullrun_mos1_xmm0111260201_pi300-10000_pass1_cl_src8.gif
[Mon Sep 26 00:51:20 2011] Mean detx,y = (-10751.31, 2442.60) 
[Mon Sep 26 00:51:21 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Sep 26 00:51:29 2011] Binned source spectrum to 10 counts/bin
[Mon Sep 26 00:51:29 2011] Setting source spectrum file to fullrun_mos1_xmm0111260201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Sep 26 00:51:29 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0111260201_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon Sep 26 00:57:39 2011] Not generating rmf since there are only 25 counts
[Mon Sep 26 00:57:39 2011] rmf not generated due to insufficient counts
[Mon Sep 26 01:00:54 2011] Updating aperture counts using extracted products
[Mon Sep 26 01:00:54 2011] Error reading totcts from fullrun_mos1_xmm0111260201_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon Sep 26 01:00:54 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 01:00:54 2011] Using photon index=1.80, rate=0.00213, arf fullrun_mos1_xmm0111260201_pi300-10000_pass1_cl_src8.arf
[Mon Sep 26 01:00:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Sep 26 01:00:54 2011] Updating source flux to 3.9e-14
[Mon Sep 26 01:00:56 2011] Source 8 has fewer than 100.000000 counts, skipping spectral fitting