[Sun Sep 25 22:15:47 2011] Detection parameters:
  Position = (277.7, 308.0) = 15 10 2.91 57 2 43.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 614.9 +/- 30.0
  Background counts = 7.1
  Rate = 0.05 +/- 0.002

[Sun Sep 25 22:15:47 2011] Off-axis axis estimate = 1.66'
[Sun Sep 25 22:47:25 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 22:47:25 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Sun Sep 25 22:47:25 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Sun Sep 25 22:47:25 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Sun Sep 25 23:04:42 2011] fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_src1.ximg exists
[Sun Sep 25 23:04:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_src1.csv
[Sun Sep 25 23:04:42 2011] fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Sep 25 23:04:42 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_src1.csv
[Sun Sep 25 23:04:42 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep 25 23:04:42 2011] fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep 25 23:04:42 2011] fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep 25 23:04:42 2011] Fit fullrun_mos1_xmm0111260201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep 25 23:19:22 2011] Source 1 is offset by 6.364182 and 5.693405 pixels which is larger than
2 X fitted extent = 0.834133 x 0.834133, not incorporating fit results
[Sun Sep 25 23:19:23 2011] Vigneting correction estimate = 1.000000
[Sun Sep 25 23:19:23 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep 25 23:19:23 2011] Assessing source extent using major
[Sun Sep 25 23:19:23 2011] Source does appear to be extended
[Sun Sep 25 23:19:23 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep 25 23:52:05 2011] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sun Sep 25 23:52:05 2011] Initial guess for spatial extent in simple fitting = 7.26"
[Sun Sep 25 23:52:05 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.851
[Sun Sep 25 23:52:05 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 7.26"
[Mon Sep 26 00:12:18 2011] fullrun_mos1_xmm0111260201_pi300-10000_cl_pass1_src1.ximg exists
[Mon Sep 26 00:12:18 2011] fullrun_mos1_xmm0111260201_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Sep 26 00:12:18 2011] Fit fullrun_mos1_xmm0111260201_pi300-10000_cl_pass1_src1 appears to have run properly
[Mon Sep 26 00:12:18 2011] fullrun_mos1_xmm0111260201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Sep 26 00:12:18 2011] fullrun_mos1_xmm0111260201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Sep 26 00:12:18 2011] Fit fullrun_mos1_xmm0111260201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Sep 26 00:28:59 2011] Spatial fit model total counts = 545.000000, observed total counts = 545.000000
[Mon Sep 26 00:28:59 2011] Offset between fit and detection position for source 1 = 0.089387 pixels
[Mon Sep 26 00:28:59 2011] 546.181000 total counts/ 133.776000 bgd. counts: snr = 35.656180
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.089387 pixels
  Position = (277.6, 308.1) = 15 10 2.95 57 2 42.9
  Extent = 5.7 (5.2-6.1)", rotation angle = 0
  Source counts = 412.4 +/- 23.4
  Background counts = 133.8
  Rate = 0.03 +/- 0.002
[Mon Sep 26 00:28:59 2011] Vigneting correction estimate = 1.000000
[Mon Sep 26 00:28:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Sep 26 00:28:59 2011] Assessing source extent using major axis lower bound
[Mon Sep 26 00:28:59 2011] Source does appear to be extended
[Mon Sep 26 00:28:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Sep 26 00:50:36 2011] XMMSAS src. selection expression = ellipse(24103.696000, 26752.797400, 342.036950, 342.036950, 0.000000, X, Y)
[Mon Sep 26 00:50:36 2011] Writing source region out to fullrun_mos1_xmm0111260201_pi300-10000_pass1_cl_src1_src.reg
[Mon Sep 26 00:50:36 2011] Extracting stamp from image fullrun_mos1_xmm0111260201_pi300-10000_cl_sm2.00.img.gz, (258, 288) - (297, 328)
[Mon Sep 26 00:50:36 2011] XMMSAS bgd. selection expression = annulus(24103.696000, 26752.797400, 570.061584, 1140.123168, X, Y)
[Mon Sep 26 00:50:36 2011] Writing fullrun_mos1_xmm0111260201_pi300-10000_pass1_cl_src1.gif
[Mon Sep 26 00:50:38 2011] Mean detx,y = (245.96, -247.59) 
[Mon Sep 26 00:50:39 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Sep 26 00:50:46 2011] Binned source spectrum to 10 counts/bin
[Mon Sep 26 00:50:46 2011] Setting source spectrum file to fullrun_mos1_xmm0111260201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Sep 26 00:50:46 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0111260201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Sep 26 01:00:54 2011] Updating aperture counts using extracted products
[Mon Sep 26 01:00:54 2011] Error reading totcts from fullrun_mos1_xmm0111260201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Sep 26 01:00:54 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 01:00:54 2011] Using photon index=1.80, rate=0.034, arf fullrun_mos1_xmm0111260201_pi300-10000_pass1_cl_src1.arf
[Mon Sep 26 01:00:54 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Sep 26 01:00:54 2011] Updating source flux to 3.8e-13
[Mon Sep 26 01:00:56 2011] Flag b found in src. 1 procflags, skipping spectral fitting
[Mon Sep 26 01:01:02 2011] Reading fit data from xmm0111260201/analysis//spectral/fullrun_mos1_xmm0111260201_pi300-10000_pass1_cl_src1_pl.csv
[Mon Sep 26 01:01:02 2011] Spectral fit parameter nH value = 2.73182e+20
[Mon Sep 26 01:01:02 2011] Spectral fit parameter PhoIndex value = 1.39537
[Mon Sep 26 01:01:02 2011] Failed to get F(0.3-8.0) from xmm0111260201/analysis//spectral/fullrun_mos1_xmm0111260201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Sep 26 01:01:02 2011] Calculating source flux in energy range 0.30-8.00
[Mon Sep 26 01:01:02 2011] Using Nh = 2.7e+20, photon index=1.40, rate=0.034, arf fullrun_mos1_xmm0111260201_pi300-10000_pass1_cl_src1.arf
[Mon Sep 26 01:01:02 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Sep 26 01:01:02 2011] Updating source flux to 4.8e-13