[Fri Aug  3 20:15:25 2012] Detection parameters:
  Position = (276.4, 289.7) = 21 15 41.00 -58 40 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1770.4 +/- 50.4
  Background counts = 6.7
  Rate = 0.8 +/- 0.02

[Fri Aug  3 20:15:25 2012] Off-axis axis estimate = 1.72'
[Fri Aug  3 20:28:30 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 20:28:30 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Fri Aug  3 20:28:30 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Fri Aug  3 20:28:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Fri Aug  3 20:31:48 2012] fullrun_mos2_xmm0111251801_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug  3 20:31:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111251801_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 20:31:48 2012] fullrun_mos2_xmm0111251801_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug  3 20:31:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111251801_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 20:31:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111251801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111251801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 20:31:48 2012] fullrun_mos2_xmm0111251801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug  3 20:31:48 2012] fullrun_mos2_xmm0111251801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug  3 20:31:48 2012] Fit fullrun_mos2_xmm0111251801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug  3 20:31:51 2012] Spatial fit model total counts = 1339.730000, observed total counts = 1304.000000
[Fri Aug  3 20:31:51 2012] Offset between fit and detection position for source 2 = 0.145022 pixels
[Fri Aug  3 20:31:51 2012] 1338.068000 total counts/ 335.188000 bgd. counts: snr = 54.777819
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.145022 pixels
  Position = (276.4, 289.6) = 21 15 41.01 -58 40 54.3
  Extent = 5.5 (5.1-5.7)", rotation angle = 0
  Source counts = 1002.9 +/- 36.6
  Background counts = 335.2
  Rate = 0.5 +/- 0.02
[Fri Aug  3 20:31:51 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 20:31:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 20:31:51 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 20:31:51 2012] Source does appear to be extended
[Fri Aug  3 20:31:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 20:45:22 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 20:45:22 2012] Initial guess for spatial extent in simple fitting = 5.47"
[Fri Aug  3 20:45:22 2012] source mask rpix=1.3, npix_max = 12, mask sum = 9, frac = 0.729
[Fri Aug  3 20:45:22 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.47"
[Fri Aug  3 20:48:51 2012] fullrun_mos2_xmm0111251801_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug  3 20:48:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111251801_pi300-10000_cl_pass1_src1.csv
[Fri Aug  3 20:48:51 2012] fullrun_mos2_xmm0111251801_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug  3 20:48:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111251801_pi300-10000_cl_pass1_src1.csv
[Fri Aug  3 20:48:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111251801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111251801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 20:48:51 2012] fullrun_mos2_xmm0111251801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug  3 20:48:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111251801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Aug  3 20:48:51 2012] fullrun_mos2_xmm0111251801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug  3 20:48:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111251801_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri Aug  3 20:48:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111251801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111251801_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 20:48:54 2012] Warning, spatial fit 1 centroid is now closest to src. 5
[Fri Aug  3 20:48:54 2012] Source 1 in spatial fitting is no longer close to this source
[Fri Aug  3 20:48:54 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 20:48:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 20:48:54 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 20:48:54 2012] Source does appear to be extended
[Fri Aug  3 20:48:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 21:30:58 2012] Counts = 1002.880000, rescaling region sizes by 2.000000
[Fri Aug  3 21:30:58 2012] XMMSAS src. selection expression = ellipse(23997.371000, 25146.924400, 655.927219, 655.927219, 0.000000, X, Y)
[Fri Aug  3 21:30:58 2012] Writing source region out to fullrun_mos2_xmm0111251801_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug  3 21:30:58 2012] Extracting stamp from image fullrun_mos2_xmm0111251801_pi300-10000_cl_sm2.00.img.gz, (239, 252) - (314, 327)
[Fri Aug  3 21:30:58 2012] XMMSAS bgd. selection expression = annulus(23997.371000, 25146.924400, 2186.424063, 4372.848126, X, Y)
[Fri Aug  3 21:30:58 2012] Writing fullrun_mos2_xmm0111251801_pi300-10000_pass1_cl_src2.gif
[Fri Aug  3 21:30:59 2012] Mean detx,y = (105.14, 132.48) 
[Fri Aug  3 21:31:00 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 21:31:26 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 21:31:27 2012] Setting source spectrum file to fullrun_mos2_xmm0111251801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug  3 21:31:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111251801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug  3 21:35:57 2012] Updating aperture counts using extracted products
[Fri Aug  3 21:35:57 2012] Error reading totcts from fullrun_mos2_xmm0111251801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug  3 21:35:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 21:35:58 2012] Using photon index=1.80, rate=0.464, arf fullrun_mos2_xmm0111251801_pi300-10000_pass1_cl_src2.arf
[Fri Aug  3 21:35:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 21:35:58 2012] Updating source flux to 4.9e-12
[Fri Aug  3 21:36:08 2012] Reading fit data from xmm0111251801/analysis//spectral/fullrun_mos2_xmm0111251801_pi300-10000_pass1_cl_src2_pl.csv
[Fri Aug  3 21:36:08 2012] Spectral fit parameter nH value = 1.69058e+20
[Fri Aug  3 21:36:08 2012] Spectral fit parameter PhoIndex value = 1.62455
[Fri Aug  3 21:36:08 2012] Failed to get F(0.3-8.0) from xmm0111251801/analysis//spectral/fullrun_mos2_xmm0111251801_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Aug  3 21:36:08 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 21:36:08 2012] Using Nh = 1.7e+20, photon index=1.62, rate=0.464, arf fullrun_mos2_xmm0111251801_pi300-10000_pass1_cl_src2.arf
[Fri Aug  3 21:36:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 21:36:08 2012] Updating source flux to 5.4e-12