[Fri Aug  3 20:15:14 2012] Detection parameters:
  Position = (349.7, 206.2) = 21 15 0.04 -58 46 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 484.0 +/- 28.5
  Background counts = 50.3
  Rate = 0.09 +/- 0.005

[Fri Aug  3 20:15:14 2012] Off-axis axis estimate = 7.65'
[Fri Aug  3 20:24:40 2012] Using EEF radius (= 10.25 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 20:24:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 20:24:40 2012] Initial guess for spatial extent in simple fitting = 10.25"
[Fri Aug  3 20:24:40 2012] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.102
[Fri Aug  3 20:24:40 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.25"
[Fri Aug  3 20:28:30 2012] fullrun_mos1_xmm0111251801_pi300-10000_cl_pass0_src2.ximg exists
[Fri Aug  3 20:28:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111251801_pi300-10000_cl_pass0_src2.csv
[Fri Aug  3 20:28:30 2012] fullrun_mos1_xmm0111251801_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Aug  3 20:28:30 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111251801_pi300-10000_cl_pass0_src2.csv
[Fri Aug  3 20:28:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111251801_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111251801_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 20:28:30 2012] fullrun_mos1_xmm0111251801_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Aug  3 20:28:30 2012] fullrun_mos1_xmm0111251801_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Aug  3 20:28:30 2012] Fit fullrun_mos1_xmm0111251801_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Aug  3 20:31:50 2012] Spatial fit model total counts = 201.884000, observed total counts = 201.000000
[Fri Aug  3 20:31:50 2012] Offset between fit and detection position for source 1 = 0.214294 pixels
[Fri Aug  3 20:31:50 2012] 201.505100 total counts/ 108.338000 bgd. counts: snr = 8.951013
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.214294 pixels
  Position = (349.6, 206.4) = 21 15 0.09 -58 46 56.1
  Extent = 6.2 (4.6-7.8)", rotation angle = 0
  Source counts = 93.2 +/- 14.2
  Background counts = 108.3
  Rate = 0.04 +/- 0.005
[Fri Aug  3 20:31:50 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 20:31:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 20:31:50 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 20:31:50 2012] Source does appear to be extended
[Fri Aug  3 20:31:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 20:41:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 20:41:28 2012] Initial guess for spatial extent in simple fitting = 6.24"
[Fri Aug  3 20:41:28 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.068
[Fri Aug  3 20:41:28 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 6.24"
[Fri Aug  3 20:45:21 2012] fullrun_mos1_xmm0111251801_pi300-10000_cl_pass1_src2.ximg exists
[Fri Aug  3 20:45:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251801_pi300-10000_cl_pass1_src2.csv
[Fri Aug  3 20:45:21 2012] fullrun_mos1_xmm0111251801_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Aug  3 20:45:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251801_pi300-10000_cl_pass1_src2.csv
[Fri Aug  3 20:45:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111251801_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111251801_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 20:45:22 2012] fullrun_mos1_xmm0111251801_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Aug  3 20:45:22 2012] fullrun_mos1_xmm0111251801_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Aug  3 20:45:22 2012] Fit fullrun_mos1_xmm0111251801_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Aug  3 20:48:54 2012] Warning, spatial fit 2 centroid is now closest to src. 2
[Fri Aug  3 20:48:54 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 20:48:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 20:48:54 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 20:48:54 2012] Source does appear to be extended
[Fri Aug  3 20:48:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 20:59:38 2012] XMMSAS src. selection expression = ellipse(30365.543800, 17906.687600, 374.628011, 374.628011, 0.000000, X, Y)
[Fri Aug  3 20:59:38 2012] Writing source region out to fullrun_mos1_xmm0111251801_pi300-10000_pass1_cl_src1_src.reg
[Fri Aug  3 20:59:38 2012] Extracting stamp from image fullrun_mos1_xmm0111251801_pi300-10000_cl_sm2.00.img.gz, (328, 185) - (371, 228)
[Fri Aug  3 20:59:38 2012] XMMSAS bgd. selection expression = annulus(30365.543800, 17906.687600, 624.380018, 1248.760036, X, Y)
[Fri Aug  3 20:59:38 2012] Writing fullrun_mos1_xmm0111251801_pi300-10000_pass1_cl_src1.gif
[Fri Aug  3 21:02:21 2012] Mean detx,y = (2423.81, -9677.60) 
[Fri Aug  3 21:02:22 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 21:02:27 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 21:02:27 2012] Setting source spectrum file to fullrun_mos1_xmm0111251801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug  3 21:02:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111251801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Aug  3 21:30:49 2012] Not generating rmf since there are only 93 counts
[Fri Aug  3 21:30:49 2012] rmf not generated due to insufficient counts
[Fri Aug  3 21:35:57 2012] Updating aperture counts using extracted products
[Fri Aug  3 21:35:57 2012] Error reading totcts from fullrun_mos1_xmm0111251801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Aug  3 21:35:57 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 21:35:57 2012] Using photon index=1.80, rate=0.0357, arf fullrun_mos1_xmm0111251801_pi300-10000_pass1_cl_src1.arf
[Fri Aug  3 21:35:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 21:35:57 2012] Updating source flux to 7.6e-13
[Fri Aug  3 21:35:58 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Aug  3 21:35:59 2012] xmm0111251801/analysis//spectral/fullrun_mos1_xmm0111251801_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete