[Wed May 22 18:21:37 2013] Detection parameters:
  Position = (239.5, 314.6) = 21 16 1.46 -58 39 5.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.5 +/- 13.5
  Background counts = 18.3
  Rate = 0.01 +/- 0.001

[Wed May 22 18:21:37 2013] Off-axis axis estimate = 4.43'
[Wed May 22 18:23:28 2013] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Wed May 22 18:23:28 2013] Initial guess for spatial extent in simple fitting = 8.64"
[Wed May 22 18:23:28 2013] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.889
[Wed May 22 18:23:28 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 8.64"
[Wed May 22 18:58:54 2013] fullrun_pn_xmm0111251501_pi300-10000_cl_pass0_src8.ximg exists
[Wed May 22 18:58:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111251501_pi300-10000_cl_pass0_src8.csv
[Wed May 22 18:58:55 2013] fullrun_pn_xmm0111251501_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed May 22 18:58:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111251501_pi300-10000_cl_pass0_src8.csv
[Wed May 22 18:58:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111251501_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111251501_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 18:58:55 2013] fullrun_pn_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed May 22 18:58:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed May 22 18:58:55 2013] fullrun_pn_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed May 22 18:58:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed May 22 18:58:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 19:50:23 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.196955 pixels away
[Wed May 22 19:50:23 2013] Vigneting correction estimate = 1.000000
[Wed May 22 19:50:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 19:50:23 2013] Assessing source extent using major
[Wed May 22 19:50:23 2013] Source does appear to be extended
[Wed May 22 19:50:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 19:50:34 2013] Using EEF radius (= 8.64 ")to estimate initial spatial extent for simple fitting
[Wed May 22 19:50:34 2013] Initial guess for spatial extent in simple fitting = 8.64"
[Wed May 22 19:50:34 2013] source mask rpix=2.0, npix_max = 24, mask sum = 22, frac = 0.889
[Wed May 22 19:50:34 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 8.64"
[Wed May 22 20:14:42 2013] fullrun_pn_xmm0111251501_pi300-10000_cl_pass1_src8.ximg exists
[Wed May 22 20:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111251501_pi300-10000_cl_pass1_src8.csv
[Wed May 22 20:14:42 2013] fullrun_pn_xmm0111251501_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed May 22 20:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111251501_pi300-10000_cl_pass1_src8.csv
[Wed May 22 20:14:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111251501_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111251501_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 20:14:42 2013] fullrun_pn_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed May 22 20:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed May 22 20:14:42 2013] fullrun_pn_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed May 22 20:14:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed May 22 20:14:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 20:59:24 2013] Source 8 is offset by -7.382659 and 1.056331 pixels which is larger than
2 X fitted extent = 0.997517 x 0.997517, not incorporating fit results
[Wed May 22 20:59:24 2013] Vigneting correction estimate = 1.000000
[Wed May 22 20:59:24 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 20:59:24 2013] Assessing source extent using major
[Wed May 22 20:59:24 2013] Source does appear to be extended
[Wed May 22 20:59:24 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 20:59:34 2013] XMMSAS src. selection expression = ellipse(20790.730698, 27318.028625, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 20:59:34 2013] Writing source region out to fullrun_pn_xmm0111251501_pi300-10000_pass1_cl_src8_src.reg
[Wed May 22 20:59:34 2013] Extracting stamp from image fullrun_pn_xmm0111251501_pi300-10000_cl_sm2.00.img.gz, (202, 277) - (277, 352)
[Wed May 22 20:59:34 2013] XMMSAS bgd. selection expression = annulus(20790.730698, 27318.028625, 1087.500000, 2175.000000, X, Y) && !ellipse(23999.575600, 25131.946800, 1416.244841, 1416.244841, 0.000000, X, Y) && !ellipse(23717.896515, 26033.036926, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 20:59:34 2013] Writing fullrun_pn_xmm0111251501_pi300-10000_pass1_cl_src8.gif
[Wed May 22 21:06:45 2013] Mean detx,y = (3919.20, -478.67) 
[Wed May 22 21:06:48 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 21:07:22 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 21:07:22 2013] Setting source spectrum file to fullrun_pn_xmm0111251501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed May 22 21:07:22 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111251501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed May 22 21:42:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 22 21:42:31 2013] rmf not generated due to insufficient counts
[Wed May 22 22:07:30 2013] Updating aperture counts using extracted products
[Wed May 22 22:07:30 2013] Total counts from fullrun_pn_xmm0111251501_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 183.00
[Wed May 22 22:07:30 2013] Total counts from fullrun_pn_xmm0111251501_pi300-10000_pass1_cl_src8_bgd.pi.gz = 916.00
[Wed May 22 22:07:30 2013] Got source and background scale factors 902175.000000, 9076598.000000
[Wed May 22 22:07:30 2013] User source parameters:
  Position = (239.5, 314.6) = 21 16 1.46 -58 39 5.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 92.0 +/- 14.6
  Background aperture counts = 91.0
  Rate = 0.007 +/- 0.001

[Wed May 22 22:07:30 2013] Updating counts from extracted products
[Wed May 22 22:07:30 2013] Set source signif. to 91.95/9.54 = 9.64
[Wed May 22 22:07:31 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 22:07:31 2013] Using photon index=1.80, rate=0.00695, arf fullrun_pn_xmm0111251501_pi300-10000_pass1_cl_src8.arf
[Wed May 22 22:07:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 22:07:31 2013] Updating source flux to 2.4e-14
[Wed May 22 22:07:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 22:07:40 2013] xmm0111251501/analysis//spectral/fullrun_pn_xmm0111251501_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete