[Wed May 22 18:21:57 2013] Detection parameters:
  Position = (273.5, 299.8) = 21 15 42.53 -58 40 5.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.4 +/- 15.5
  Background counts = 6.2
  Rate = 0.006 +/- 0.001

[Wed May 22 18:21:58 2013] Off-axis axis estimate = 1.81'
[Wed May 22 18:58:55 2013] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Wed May 22 18:58:55 2013] Initial guess for spatial extent in simple fitting = 7.33"
[Wed May 22 18:58:55 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.046
[Wed May 22 18:58:55 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.33"
[Wed May 22 19:31:05 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src4.ximg exists
[Wed May 22 19:31:05 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed May 22 19:31:05 2013] Fit fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src4 appears to have run properly
[Wed May 22 19:31:05 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed May 22 19:31:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May 22 19:31:05 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed May 22 19:31:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed May 22 19:31:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 19:50:26 2013] Source 8 is offset by 4.222261 and 3.117095 pixels which is larger than
2 X fitted extent = 0.838322 x 0.838322, not incorporating fit results
[Wed May 22 19:50:26 2013] Warning, spatial fit 4 centroid is now closest to src. 2
[Wed May 22 19:50:26 2013] Vigneting correction estimate = 1.000000
[Wed May 22 19:50:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 19:50:26 2013] Assessing source extent using major
[Wed May 22 19:50:26 2013] Source does appear to be extended
[Wed May 22 19:50:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 20:14:42 2013] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Wed May 22 20:14:42 2013] Initial guess for spatial extent in simple fitting = 7.33"
[Wed May 22 20:14:42 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.046
[Wed May 22 20:14:42 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.33"
[Wed May 22 20:42:33 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src4.ximg exists
[Wed May 22 20:42:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src4.csv
[Wed May 22 20:42:33 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src4_1.ximg exists
[Wed May 22 20:42:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src4.csv
[Wed May 22 20:42:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 20:42:33 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Wed May 22 20:42:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May 22 20:42:33 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Wed May 22 20:42:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src4.csv
[Wed May 22 20:42:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 20:59:27 2013] Source 8 is offset by -3.092291 and 6.566980 pixels which is larger than
2 X fitted extent = 2.333830 x 2.333830, not incorporating fit results
[Wed May 22 20:59:27 2013] Vigneting correction estimate = 1.000000
[Wed May 22 20:59:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 20:59:27 2013] Assessing source extent using major
[Wed May 22 20:59:27 2013] Source does appear to be extended
[Wed May 22 20:59:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 21:43:05 2013] XMMSAS src. selection expression = ellipse(23747.364685, 26036.159241, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 22 21:43:05 2013] Writing source region out to fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src8_src.reg
[Wed May 22 21:43:05 2013] Extracting stamp from image fullrun_mos1_xmm0111251501_pi300-10000_cl_sm2.00.img.gz, (236, 262) - (311, 337)
[Wed May 22 21:43:05 2013] XMMSAS bgd. selection expression = annulus(23747.364685, 26036.159241, 1087.500000, 2175.000000, X, Y) && !ellipse(24000.851800, 25137.791600, 445.515213, 445.515213, 0.000000, X, Y)
[Wed May 22 21:43:05 2013] Writing fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src8.gif
[Wed May 22 21:43:59 2013] Mean detx,y = (-40.27, 206.90) 
[Wed May 22 21:44:00 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 21:44:27 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 21:44:27 2013] Setting source spectrum file to fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Wed May 22 21:44:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Wed May 22 21:56:17 2013] Not generating rmf since there are only 91 counts
[Wed May 22 21:56:17 2013] rmf not generated due to insufficient counts
[Wed May 22 22:07:31 2013] Updating aperture counts using extracted products
[Wed May 22 22:07:31 2013] Total counts from fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 652.00
[Wed May 22 22:07:31 2013] Total counts from fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src8_bgd.pi.gz = 671.00
[Wed May 22 22:07:31 2013] Got source and background scale factors 1344000.000000, 1248832.000000
[Wed May 22 22:07:31 2013] User source parameters:
  Position = (273.5, 299.8) = 21 15 42.53 -58 40 5.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -70.1 +/- 26.5
  Background aperture counts = 722.1
  Rate = -0.004 +/- 0.002

[Wed May 22 22:07:31 2013] Updating counts from extracted products
[Wed May 22 22:07:31 2013] Set source signif. to -70.13/26.87 = -2.61
[Wed May 22 22:07:32 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 22:07:32 2013] Using photon index=1.80, rate=-0.0045, arf fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src8.arf
[Wed May 22 22:07:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 22:07:33 2013] Updated flux is not positive, keeping original flux
[Wed May 22 22:07:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 22 22:07:36 2013] xmm0111251501/analysis//spectral/fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete