[Wed May 22 18:21:57 2013] Detection parameters:
  Position = (98.3, 350.8) = 21 17 20.02 -58 36 22.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.5 +/- 7.7
  Background counts = 4.1
  Rate = 0.002 +/- 0.0005

[Wed May 22 18:21:58 2013] Off-axis axis estimate = 14.99'
[Wed May 22 18:58:55 2013] Using EEF radius (= 13.93 ")to estimate initial spatial extent for simple fitting
[Wed May 22 18:58:55 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 22 18:58:55 2013] Initial guess for spatial extent in simple fitting = 13.93"
[Wed May 22 18:58:55 2013] source mask rpix=3.2, npix_max = 54, mask sum = 47, frac = 0.858
[Wed May 22 18:58:55 2013] Giving source the simple spatial ID 14 for pass 0, mean size = 13.93"
[Wed May 22 19:31:05 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src14.ximg exists
[Wed May 22 19:31:05 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src14_1.ximg exists
[Wed May 22 19:31:05 2013] Fit fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src14 appears to have run properly
[Wed May 22 19:31:05 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Wed May 22 19:31:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed May 22 19:31:05 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Wed May 22 19:31:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src14.csv
[Wed May 22 19:31:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 19:50:26 2013] Spatial fit model total counts = 82.764300, observed total counts = 75.000000
[Wed May 22 19:50:26 2013] Offset between fit and detection position for source 7 = 2.295777 pixels
[Wed May 22 19:50:26 2013] 81.689100 total counts/ 38.531000 bgd. counts: snr = 6.952759
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 2.295777 pixels
  Position = (100.2, 352.1) = 21 17 18.98 -58 36 19.4
  Extent = 18.5 (12.4-27.9)" x 6.3 (3.9-9.7)", rotation angle = 321 (306-337) degrees
  Source counts = 43.2 +/- 9.0
  Background counts = 38.5
  Rate = 0.003 +/- 0.0006
[Wed May 22 19:50:26 2013] Vigneting correction estimate = 1.000000
[Wed May 22 19:50:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 19:50:26 2013] Assessing source extent using major axis lower bound
[Wed May 22 19:50:26 2013] Source does appear to be extended
[Wed May 22 19:50:26 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.28
[Wed May 22 20:14:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 22 20:14:42 2013] Initial guess for spatial extent in simple fitting = 12.37"
[Wed May 22 20:14:42 2013] source mask rpix=2.8, npix_max = 44, mask sum = 40, frac = 0.894
[Wed May 22 20:14:42 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 12.37"
[Wed May 22 20:42:33 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src13.ximg exists
[Wed May 22 20:42:33 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed May 22 20:42:33 2013] Fit fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src13 appears to have run properly
[Wed May 22 20:42:33 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed May 22 20:42:33 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed May 22 20:42:33 2013] Fit fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Wed May 22 20:59:27 2013] Spatial fit model total counts = 74.759400, observed total counts = 70.000000
[Wed May 22 20:59:27 2013] Offset between fit and detection position for source 7 = 0.307764 pixels
[Wed May 22 20:59:27 2013] 72.929000 total counts/ 28.989900 bgd. counts: snr = 8.160707
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.307764 pixels
  Position = (100.5, 352.3) = 21 17 18.85 -58 36 18.6
  Extent = 18.9 (14.2-24.7)" x 6.2 (4.3-9.2)", rotation angle = 320 (307-330) degrees
  Source counts = 43.9 +/- 8.5
  Background counts = 29.0
  Rate = 0.003 +/- 0.0005
[Wed May 22 20:59:27 2013] Vigneting correction estimate = 1.000000
[Wed May 22 20:59:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 20:59:27 2013] Assessing source extent using major axis lower bound
[Wed May 22 20:59:27 2013] Source does appear to be extended
[Wed May 22 20:59:27 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.54
[Wed May 22 20:59:27 2013] Source is asymmetric
[Wed May 22 21:43:06 2013] XMMSAS src. selection expression = ellipse(8691.143000, 30600.516320, 1134.660033, 373.551611, 319.682531, X, Y)
[Wed May 22 21:43:06 2013] Writing source region out to fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src7_src.reg
[Wed May 22 21:43:06 2013] Extracting stamp from image fullrun_mos1_xmm0111251501_pi300-10000_cl_sm2.00.img.gz, (35, 287) - (166, 417)
[Wed May 22 21:43:06 2013] XMMSAS bgd. selection expression = annulus(8691.143000, 30600.516320, 1891.100054, 3782.200109, X, Y) && !ellipse(12503.659400, 26408.658400, 475.301614, 475.301614, 0.000000, X, Y)
[Wed May 22 21:43:06 2013] Writing fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src7.gif
[Wed May 22 21:46:01 2013] Mean detx,y = (5440.53, 15083.21) 
[Wed May 22 21:46:02 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 21:46:32 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 21:46:32 2013] Setting source spectrum file to fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Wed May 22 21:46:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed May 22 21:56:57 2013] Not generating rmf since there are only 43 counts
[Wed May 22 21:56:57 2013] rmf not generated due to insufficient counts
[Wed May 22 22:07:32 2013] Updating aperture counts using extracted products
[Wed May 22 22:07:32 2013] Total counts from fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 43.00
[Wed May 22 22:07:32 2013] Total counts from fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src7_bgd.pi.gz = 405.00
[Wed May 22 22:07:32 2013] Got source and background scale factors 982619.000000, 15498379.000000
[Wed May 22 22:07:32 2013] User source parameters:
  Position = (100.5, 352.3) = 21 17 18.85 -58 36 18.6
  Extent = 18.9 (14.2-24.7)" x 6.2 (4.3-9.2)", rotation angle = 320 (307-330) degrees
  Source aperture counts = 17.3 +/- 7.6
  Background aperture counts = 25.7
  Rate = 0.001 +/- 0.0005

[Wed May 22 22:07:33 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 22:07:33 2013] Using photon index=1.80, rate=0.00282, arf fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src7.arf
[Wed May 22 22:07:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 22:07:33 2013] Updating source flux to 7.2e-14
[Wed May 22 22:07:35 2013] Source 7 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 22 22:07:36 2013] xmm0111251501/analysis//spectral/fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete