[Wed May 22 18:21:57 2013] Detection parameters:
  Position = (223.0, 173.3) = 21 16 10.91 -58 49 22.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.2 +/- 9.7
  Background counts = 3.3
  Rate = 0.004 +/- 0.0006

[Wed May 22 18:21:58 2013] Off-axis axis estimate = 10.59'
[Wed May 22 18:58:55 2013] Using EEF radius (= 11.73 ")to estimate initial spatial extent for simple fitting
[Wed May 22 18:58:55 2013] Initial guess for spatial extent in simple fitting = 11.73"
[Wed May 22 18:58:55 2013] source mask rpix=2.7, npix_max = 40, mask sum = 35, frac = 0.857
[Wed May 22 18:58:55 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 11.73"
[Wed May 22 19:31:05 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src10.ximg exists
[Wed May 22 19:31:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src10.csv
[Wed May 22 19:31:05 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed May 22 19:31:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src10.csv
[Wed May 22 19:31:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 19:31:05 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed May 22 19:31:05 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed May 22 19:31:05 2013] Fit fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed May 22 19:50:26 2013] Spatial fit model total counts = 81.678100, observed total counts = 89.000000
[Wed May 22 19:50:26 2013] Offset between fit and detection position for source 4 = 0.551143 pixels
[Wed May 22 19:50:26 2013] 81.807500 total counts/ 49.218000 bgd. counts: snr = 4.645321
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.551143 pixels
  Position = (222.9, 172.8) = 21 16 10.94 -58 49 22.0
  Extent = 5.3 (2.9-7.6)", rotation angle = 0
  Source counts = 32.6 +/- 9.0
  Background counts = 49.2
  Rate = 0.002 +/- 0.0006
[Wed May 22 19:50:26 2013] Vigneting correction estimate = 1.000000
[Wed May 22 19:50:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 19:50:26 2013] Assessing source extent using major axis lower bound
[Wed May 22 19:50:26 2013] Source does appear to be extended
[Wed May 22 19:50:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 20:14:42 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 22 20:14:42 2013] Initial guess for spatial extent in simple fitting = 5.32"
[Wed May 22 20:14:42 2013] source mask rpix=1.2, npix_max = 11, mask sum = 8, frac = 0.674
[Wed May 22 20:14:42 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 5.32"
[Wed May 22 20:42:33 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src9.ximg exists
[Wed May 22 20:42:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src9.csv
[Wed May 22 20:42:33 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed May 22 20:42:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src9.csv
[Wed May 22 20:42:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 20:42:33 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed May 22 20:42:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed May 22 20:42:33 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed May 22 20:42:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed May 22 20:42:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 20:59:27 2013] Spatial fit model total counts = 72.919800, observed total counts = 82.000000
[Wed May 22 20:59:27 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 22 20:59:27 2013] Vigneting correction estimate = 1.000000
[Wed May 22 20:59:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 20:59:27 2013] Assessing source extent using major axis lower bound
[Wed May 22 20:59:27 2013] Source does appear to be extended
[Wed May 22 20:59:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 21:43:06 2013] XMMSAS src. selection expression = ellipse(19344.409200, 14982.697600, 319.123809, 319.123809, 0.000000, X, Y)
[Wed May 22 21:43:06 2013] Writing source region out to fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src4_src.reg
[Wed May 22 21:43:06 2013] Extracting stamp from image fullrun_mos1_xmm0111251501_pi300-10000_cl_sm2.00.img.gz, (205, 154) - (241, 191)
[Wed May 22 21:43:06 2013] XMMSAS bgd. selection expression = annulus(19344.409200, 14982.697600, 531.873015, 1063.746031, X, Y)
[Wed May 22 21:43:06 2013] Writing fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src4.gif
[Wed May 22 21:45:17 2013] Mean detx,y = (11282.70, -2802.93) 
[Wed May 22 21:45:18 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 21:45:25 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 21:45:25 2013] Setting source spectrum file to fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed May 22 21:45:25 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed May 22 21:56:41 2013] Not generating rmf since there are only 32 counts
[Wed May 22 21:56:41 2013] rmf not generated due to insufficient counts
[Wed May 22 22:07:32 2013] Updating aperture counts using extracted products
[Wed May 22 22:07:32 2013] Total counts from fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 44.00
[Wed May 22 22:07:32 2013] Total counts from fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src4_bgd.pi.gz = 67.00
[Wed May 22 22:07:32 2013] Got source and background scale factors 253168.000000, 2428696.000000
[Wed May 22 22:07:32 2013] User source parameters:
  Position = (222.9, 172.8) = 21 16 10.94 -58 49 22.0
  Extent = 5.3 (2.9-7.6)", rotation angle = 0
  Source aperture counts = 37.0 +/- 7.7
  Background aperture counts = 7.0
  Rate = 0.002 +/- 0.0005

[Wed May 22 22:07:33 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 22:07:33 2013] Using photon index=1.80, rate=0.00209, arf fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src4.arf
[Wed May 22 22:07:33 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 22:07:33 2013] Updating source flux to 5.4e-14
[Wed May 22 22:07:35 2013] Flag p found in src. 4 procflags, skipping spectral fitting
[Wed May 22 22:07:35 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Wed May 22 22:07:36 2013] xmm0111251501/analysis//spectral/fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete