[Wed May 22 18:21:57 2013] Detection parameters:
  Position = (276.4, 289.3) = 21 15 40.91 -58 40 54.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10860.9 +/- 124.2
  Background counts = 5.8
  Rate = 0.7 +/- 0.008

[Wed May 22 18:21:58 2013] Off-axis axis estimate = 1.73'
[Wed May 22 18:58:55 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed May 22 18:58:55 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Wed May 22 18:58:55 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Wed May 22 18:58:55 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Wed May 22 19:31:05 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src1.ximg exists
[Wed May 22 19:31:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src1.csv
[Wed May 22 19:31:05 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed May 22 19:31:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src1.csv
[Wed May 22 19:31:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 19:31:05 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed May 22 19:31:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 22 19:31:05 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed May 22 19:31:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed May 22 19:31:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111251501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 22 19:50:26 2013] Warning, spatial fit 1 centroid is now closest to src. 8
[Wed May 22 19:50:26 2013] Source 2 is offset by -0.263215 and -3.992926 pixels which is larger than
2 X fitted extent = 3.575347 x 2.778336, not incorporating fit results
[Wed May 22 19:50:26 2013] Vigneting correction estimate = 1.000000
[Wed May 22 19:50:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 19:50:26 2013] Assessing source extent using major
[Wed May 22 19:50:26 2013] Source does appear to be extended
[Wed May 22 19:50:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 20:14:42 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Wed May 22 20:14:42 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Wed May 22 20:14:42 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.055
[Wed May 22 20:14:42 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Wed May 22 20:42:32 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src1.ximg exists
[Wed May 22 20:42:32 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed May 22 20:42:32 2013] Fit fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_src1 appears to have run properly
[Wed May 22 20:42:33 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed May 22 20:42:33 2013] fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed May 22 20:42:33 2013] Fit fullrun_mos1_xmm0111251501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed May 22 20:59:27 2013] Spatial fit model total counts = 9728.760000, observed total counts = 9536.000000
[Wed May 22 20:59:27 2013] Offset between fit and detection position for source 2 = 0.234373 pixels
[Wed May 22 20:59:27 2013] 9732.450000 total counts/ 2101.260000 bgd. counts: snr = 166.476283
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.234373 pixels
  Position = (276.4, 289.5) = 21 15 40.91 -58 40 54.6
  Extent = 5.6 (5.5-5.7)", rotation angle = 0
  Source counts = 7631.2 +/- 98.7
  Background counts = 2101.3
  Rate = 0.5 +/- 0.006
[Wed May 22 20:59:27 2013] Vigneting correction estimate = 1.000000
[Wed May 22 20:59:27 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 22 20:59:27 2013] Assessing source extent using major axis lower bound
[Wed May 22 20:59:27 2013] Source does appear to be extended
[Wed May 22 20:59:27 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 22 21:43:05 2013] Counts = 7631.190000, rescaling region sizes by 2.000000
[Wed May 22 21:43:05 2013] XMMSAS src. selection expression = ellipse(24000.851800, 25137.791600, 668.272819, 668.272819, 0.000000, X, Y)
[Wed May 22 21:43:05 2013] Writing source region out to fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src2_src.reg
[Wed May 22 21:43:05 2013] Extracting stamp from image fullrun_mos1_xmm0111251501_pi300-10000_cl_sm2.00.img.gz, (238, 251) - (315, 328)
[Wed May 22 21:43:05 2013] XMMSAS bgd. selection expression = annulus(24000.851800, 25137.791600, 2227.576064, 4455.152128, X, Y) && !ellipse(23747.364685, 26036.159241, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 22 21:43:05 2013] Writing fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src2.gif
[Wed May 22 21:43:08 2013] Mean detx,y = (377.27, -324.26) 
[Wed May 22 21:43:09 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 22 21:43:27 2013] Binned source spectrum to 10 counts/bin
[Wed May 22 21:43:27 2013] Setting source spectrum file to fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed May 22 21:43:27 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed May 22 22:07:31 2013] Updating aperture counts using extracted products
[Wed May 22 22:07:31 2013] Total counts from fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 9360.00
[Wed May 22 22:07:31 2013] Total counts from fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src2_bgd.pi.gz = 0.00
[Wed May 22 22:07:31 2013] Got source and background scale factors 1406400.000000, 0.000000
[Wed May 22 22:07:31 2013] Background scale factor is not positive, halting re-assessment of this source
[Wed May 22 22:07:32 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 22 22:07:32 2013] Using photon index=1.80, rate=0.49, arf fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src2.arf
[Wed May 22 22:07:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 22 22:07:32 2013] Updating source flux to 4.9e-12
[Wed May 22 22:07:35 2013] Flag b found in src. 2 procflags, skipping spectral fitting
[Wed May 22 22:07:36 2013] xmm0111251501/analysis//spectral/fullrun_mos1_xmm0111251501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete