[Thu Jun 13 10:17:33 2013] Detection parameters:
  Position = (276.3, 290.0) = 21 15 40.85 -58 40 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1432.2 +/- 45.1
  Background counts = 1.5
  Rate = 3 +/- 0.1

[Thu Jun 13 10:17:33 2013] Off-axis axis estimate = 1.71'
[Thu Jun 13 10:18:45 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 10:18:45 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Jun 13 10:18:45 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Thu Jun 13 10:18:45 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu Jun 13 10:20:51 2013] fullrun_pn_xmm0111251401_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jun 13 10:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111251401_pi300-10000_cl_pass0_src1.csv
[Thu Jun 13 10:20:51 2013] fullrun_pn_xmm0111251401_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jun 13 10:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111251401_pi300-10000_cl_pass0_src1.csv
[Thu Jun 13 10:20:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111251401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111251401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 10:20:51 2013] fullrun_pn_xmm0111251401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jun 13 10:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111251401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 13 10:20:51 2013] fullrun_pn_xmm0111251401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jun 13 10:20:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111251401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jun 13 10:20:51 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111251401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111251401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 11:00:09 2013] Source 1 is offset by -6.356964 and -7.667725 pixels which is larger than
2 X fitted extent = 0.837412 x 0.837412, not incorporating fit results
[Thu Jun 13 11:00:09 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 11:00:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 11:00:09 2013] Assessing source extent using major
[Thu Jun 13 11:00:09 2013] Source does appear to be extended
[Thu Jun 13 11:00:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 11:00:18 2013] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 11:00:18 2013] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Jun 13 11:00:18 2013] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.057
[Thu Jun 13 11:00:18 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 7.29"
[Thu Jun 13 11:02:18 2013] fullrun_pn_xmm0111251401_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jun 13 11:02:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111251401_pi300-10000_cl_pass1_src1.csv
[Thu Jun 13 11:02:18 2013] fullrun_pn_xmm0111251401_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jun 13 11:02:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111251401_pi300-10000_cl_pass1_src1.csv
[Thu Jun 13 11:02:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111251401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111251401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 11:02:18 2013] fullrun_pn_xmm0111251401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jun 13 11:02:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111251401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun 13 11:02:18 2013] fullrun_pn_xmm0111251401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jun 13 11:02:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111251401_pi300-10000_cl_pass1_tfrozen_src1.csv
[Thu Jun 13 11:02:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111251401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111251401_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 11:18:54 2013] Source 1 is offset by -6.356964 and -7.667725 pixels which is larger than
2 X fitted extent = 0.837412 x 0.837412, not incorporating fit results
[Thu Jun 13 11:18:54 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 11:18:54 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 11:18:54 2013] Assessing source extent using major
[Thu Jun 13 11:18:54 2013] Source does appear to be extended
[Thu Jun 13 11:18:54 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 11:18:58 2013] Counts = 1432.209961, rescaling region sizes by 2.000000
[Thu Jun 13 11:18:58 2013] XMMSAS src. selection expression = ellipse(23993.284119, 25184.247955, 1305.000000, 1305.000000, 0.000000, X, Y)
[Thu Jun 13 11:18:58 2013] Writing source region out to fullrun_pn_xmm0111251401_pi300-10000_pass1_cl_src1_src.reg
[Thu Jun 13 11:18:58 2013] Extracting stamp from image fullrun_pn_xmm0111251401_pi300-10000_cl_sm2.00.img.gz, (201, 215) - (351, 365)
[Thu Jun 13 11:18:58 2013] XMMSAS bgd. selection expression = annulus(23993.284119, 25184.247955, 4350.000000, 8700.000000, X, Y) && !ellipse(30350.506400, 17920.115800, 397.732011, 397.732011, 0.000000, X, Y)
[Thu Jun 13 11:18:58 2013] Writing fullrun_pn_xmm0111251401_pi300-10000_pass1_cl_src1.gif
[Thu Jun 13 11:19:00 2013] Mean detx,y = (-3.98, -276.80) 
[Thu Jun 13 11:19:02 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 11:21:24 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 11:21:24 2013] Setting source spectrum file to fullrun_pn_xmm0111251401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jun 13 11:21:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111251401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Thu Jun 13 11:21:41 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 11:21:41 2013] rmf not generated due to insufficient counts
[Thu Jun 13 12:32:52 2013] Updating aperture counts using extracted products
[Thu Jun 13 12:32:52 2013] Total counts from fullrun_pn_xmm0111251401_pi300-10000_pass1_cl_src1_src_b10.pi.gz = 1370.00
[Thu Jun 13 12:32:52 2013] Total counts from fullrun_pn_xmm0111251401_pi300-10000_pass1_cl_src1_bgd.pi.gz = 426.00
[Thu Jun 13 12:32:52 2013] Got source and background scale factors 4710280.000000, 147475704.000000
[Thu Jun 13 12:32:52 2013] User source parameters:
  Position = (276.3, 290.0) = 21 15 40.85 -58 40 54.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1356.4 +/- 38.0
  Background aperture counts = 13.6
  Rate = 3 +/- 0.08

[Thu Jun 13 12:32:52 2013] Updating counts from extracted products
[Thu Jun 13 12:32:52 2013] Set source signif. to 1356.39/3.69 = 367.72
[Thu Jun 13 12:32:52 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 12:32:52 2013] Using photon index=1.80, rate=2.69, arf fullrun_pn_xmm0111251401_pi300-10000_pass1_cl_src1.arf
[Thu Jun 13 12:32:52 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 12:32:52 2013] Updating source flux to 6.7e-12
[Thu Jun 13 12:32:57 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 12:32:58 2013] xmm0111251401/analysis//spectral/fullrun_pn_xmm0111251401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete