[Thu Jun 13 10:18:10 2013] Detection parameters:
  Position = (273.6, 303.4) = 21 15 42.39 -58 40 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.4 +/- 11.5
  Background counts = 8.6
  Rate = 0.005 +/- 0.001

[Thu Jun 13 10:18:10 2013] Off-axis axis estimate = 1.84'
[Thu Jun 13 10:43:14 2013] Using EEF radius (= 7.35 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 10:43:14 2013] Initial guess for spatial extent in simple fitting = 7.35"
[Thu Jun 13 10:43:14 2013] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.887
[Thu Jun 13 10:43:14 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.35"
[Thu Jun 13 11:00:08 2013] fullrun_mos2_xmm0111251401_pi300-10000_cl_pass0_src5.ximg exists
[Thu Jun 13 11:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111251401_pi300-10000_cl_pass0_src5.csv
[Thu Jun 13 11:00:08 2013] fullrun_mos2_xmm0111251401_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu Jun 13 11:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111251401_pi300-10000_cl_pass0_src5.csv
[Thu Jun 13 11:00:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111251401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111251401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 11:00:08 2013] fullrun_mos2_xmm0111251401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu Jun 13 11:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111251401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Jun 13 11:00:08 2013] fullrun_mos2_xmm0111251401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu Jun 13 11:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111251401_pi300-10000_cl_pass0_tfrozen_src5.csv
[Thu Jun 13 11:00:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111251401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111251401_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 11:00:14 2013] Spatial fit model total counts = 29295.200000, observed total counts = 539.000000
[Thu Jun 13 11:00:14 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jun 13 11:00:14 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 11:00:14 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 11:00:14 2013] Assessing source extent using major
[Thu Jun 13 11:00:14 2013] Source does appear to be extended
[Thu Jun 13 11:00:14 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 11:00:14 2013] Deleting source due to low Poisson probability 0.9