[Wed Jul 11 05:37:01 2012] Detection parameters:
  Position = (349.2, 206.9) = 21 15 0.09 -58 46 56.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1892.3 +/- 53.5
  Background counts = 83.2
  Rate = 0.1 +/- 0.004

[Wed Jul 11 05:37:01 2012] Off-axis axis estimate = 7.58'
[Wed Jul 11 05:38:31 2012] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 05:38:31 2012] Initial guess for spatial extent in simple fitting = 10.22"
[Wed Jul 11 05:38:31 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.108
[Wed Jul 11 05:38:31 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 10.22"
[Wed Jul 11 05:53:13 2012] fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_src6.ximg exists
[Wed Jul 11 05:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_src6.csv
[Wed Jul 11 05:53:13 2012] fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Jul 11 05:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_src6.csv
[Wed Jul 11 05:53:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 05:53:13 2012] fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Jul 11 05:53:13 2012] fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Jul 11 05:53:13 2012] Fit fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Jul 11 06:11:24 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.136479 pixels away
[Wed Jul 11 06:11:24 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 06:11:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 06:11:24 2012] Assessing source extent using major
[Wed Jul 11 06:11:24 2012] Source does appear to be extended
[Wed Jul 11 06:11:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 06:11:32 2012] Using EEF radius (= 10.22 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 06:11:32 2012] Initial guess for spatial extent in simple fitting = 10.22"
[Wed Jul 11 06:11:32 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.108
[Wed Jul 11 06:11:32 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.22"
[Wed Jul 11 06:28:19 2012] fullrun_pn_xmm0111250101_pi300-10000_cl_pass1_src5.ximg exists
[Wed Jul 11 06:28:19 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111250101_pi300-10000_cl_pass1_src5.csv
[Wed Jul 11 06:28:19 2012] fullrun_pn_xmm0111250101_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Jul 11 06:28:19 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0111250101_pi300-10000_cl_pass1_src5.csv
[Wed Jul 11 06:28:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111250101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111250101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 06:28:19 2012] fullrun_pn_xmm0111250101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Jul 11 06:28:19 2012] fullrun_pn_xmm0111250101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Jul 11 06:28:19 2012] Fit fullrun_pn_xmm0111250101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Jul 11 06:36:49 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.447109 pixels away
[Wed Jul 11 06:36:49 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 06:36:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 06:36:49 2012] Assessing source extent using major
[Wed Jul 11 06:36:49 2012] Source does appear to be extended
[Wed Jul 11 06:36:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 06:36:53 2012] Counts = 1892.296997, rescaling region sizes by 2.000000
[Wed Jul 11 06:36:53 2012] XMMSAS src. selection expression = ellipse(30327.769836, 17954.660263, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jul 11 06:36:53 2012] Writing source region out to fullrun_pn_xmm0111250101_pi300-10000_pass1_cl_src6_src.reg
[Wed Jul 11 06:36:53 2012] Extracting stamp from image fullrun_pn_xmm0111250101_pi300-10000_cl_sm2.00.img.gz, (274, 132) - (424, 282)
[Wed Jul 11 06:36:54 2012] XMMSAS bgd. selection expression = annulus(30327.769836, 17954.660263, 4350.000000, 8700.000000, X, Y) && !ellipse(23959.125420, 25206.626000, 1410.069641, 1410.069641, 0.000000, X, Y) && !ellipse(23645.353149, 26116.404846, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23134.352936, 24397.124695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20765.683151, 27406.916351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.992950, 25956.789795, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jul 11 06:36:54 2012] Writing fullrun_pn_xmm0111250101_pi300-10000_pass1_cl_src6.gif
[Wed Jul 11 06:40:25 2012] Mean detx,y = (-9459.63, -2025.47) 
[Wed Jul 11 06:40:28 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 06:42:08 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 06:42:08 2012] Setting source spectrum file to fullrun_pn_xmm0111250101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul 11 06:42:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111250101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Jul 11 07:13:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jul 11 07:13:41 2012] rmf not generated due to insufficient counts
[Wed Jul 11 07:52:22 2012] Updating aperture counts using extracted products
[Wed Jul 11 07:52:22 2012] Error reading totcts from fullrun_pn_xmm0111250101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Wed Jul 11 07:52:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 11 07:52:22 2012] Using photon index=1.80, rate=0.143, arf fullrun_pn_xmm0111250101_pi300-10000_pass1_cl_src6.arf
[Wed Jul 11 07:52:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 11 07:52:22 2012] Updating source flux to 6.2e-13
[Wed Jul 11 07:53:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting