[Wed Jul 11 05:37:01 2012] Detection parameters:
  Position = (258.6, 284.6) = 21 15 50.69 -58 41 20.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62.5 +/- 15.0
  Background counts = 100.1
  Rate = 0.007 +/- 0.002

[Wed Jul 11 05:37:01 2012] Off-axis axis estimate = 3.06'
[Wed Jul 11 05:38:31 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 05:38:31 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Wed Jul 11 05:38:31 2012] source mask rpix=1.8, npix_max = 21, mask sum = 18, frac = 0.829
[Wed Jul 11 05:38:31 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.96"
[Wed Jul 11 05:53:13 2012] fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_src10.ximg exists
[Wed Jul 11 05:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_src10.csv
[Wed Jul 11 05:53:13 2012] fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Jul 11 05:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_src10.csv
[Wed Jul 11 05:53:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 05:53:13 2012] fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Jul 11 05:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed Jul 11 05:53:13 2012] fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Jul 11 05:53:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed Jul 11 05:53:13 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111250101_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 06:11:24 2012] Source 10 is offset by -0.268534 and -4.507711 pixels which is larger than
2 X fitted extent = 0.890671 x 0.890671, not incorporating fit results
[Wed Jul 11 06:11:24 2012] Source 10 is offset by 5.842684 and 2.228818 pixels which is larger than
2 X fitted extent = 6.270483 x 1.864276, not incorporating fit results
[Wed Jul 11 06:11:24 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 06:11:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 06:11:24 2012] Assessing source extent using major
[Wed Jul 11 06:11:24 2012] Source does appear to be extended
[Wed Jul 11 06:11:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 06:11:24 2012] Deleting source due to low Poisson probability 0.9