[Wed Jul 11 05:37:24 2012] Detection parameters:
  Position = (253.3, 137.3) = 21 15 53.79 -58 51 59.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 293.6 +/- 21.3
  Background counts = 14.2
  Rate = 0.02 +/- 0.001

[Wed Jul 11 05:37:24 2012] Off-axis axis estimate = 12.13'
[Wed Jul 11 06:01:38 2012] Using EEF radius (= 12.50 ")to estimate initial spatial extent for simple fitting
[Wed Jul 11 06:01:38 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Jul 11 06:01:38 2012] Initial guess for spatial extent in simple fitting = 12.50"
[Wed Jul 11 06:01:38 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.077
[Wed Jul 11 06:01:38 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 12.50"
[Wed Jul 11 06:11:21 2012] fullrun_mos2_xmm0111250101_pi300-10000_cl_pass0_src3.ximg exists
[Wed Jul 11 06:11:21 2012] fullrun_mos2_xmm0111250101_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Jul 11 06:11:21 2012] Fit fullrun_mos2_xmm0111250101_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed Jul 11 06:11:21 2012] fullrun_mos2_xmm0111250101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Jul 11 06:11:21 2012] fullrun_mos2_xmm0111250101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Jul 11 06:11:21 2012] Fit fullrun_mos2_xmm0111250101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Jul 11 06:11:28 2012] Spatial fit model total counts = 376.805000, observed total counts = 369.000000
[Wed Jul 11 06:11:28 2012] Offset between fit and detection position for source 11 = 0.238132 pixels
[Wed Jul 11 06:11:28 2012] 380.055000 total counts/ 197.794000 bgd. counts: snr = 12.959469
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.238132 pixels
  Position = (253.1, 137.4) = 21 15 53.90 -58 51 58.5
  Extent = 5.1 (4.3-5.8)", rotation angle = 0
  Source counts = 182.3 +/- 19.5
  Background counts = 197.8
  Rate = 0.01 +/- 0.001
[Wed Jul 11 06:11:28 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 06:11:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 06:11:28 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 06:11:28 2012] Source does appear to be extended
[Wed Jul 11 06:11:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 06:30:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jul 11 06:30:46 2012] Initial guess for spatial extent in simple fitting = 5.06"
[Wed Jul 11 06:30:46 2012] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.084
[Wed Jul 11 06:30:46 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.06"
[Wed Jul 11 06:36:47 2012] fullrun_mos2_xmm0111250101_pi300-10000_cl_pass1_src3.ximg exists
[Wed Jul 11 06:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111250101_pi300-10000_cl_pass1_src3.csv
[Wed Jul 11 06:36:47 2012] fullrun_mos2_xmm0111250101_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Jul 11 06:36:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111250101_pi300-10000_cl_pass1_src3.csv
[Wed Jul 11 06:36:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111250101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111250101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jul 11 06:36:48 2012] fullrun_mos2_xmm0111250101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Jul 11 06:36:48 2012] fullrun_mos2_xmm0111250101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Jul 11 06:36:48 2012] Fit fullrun_mos2_xmm0111250101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Jul 11 06:36:50 2012] Spatial fit model total counts = 368.441000, observed total counts = 361.000000
[Wed Jul 11 06:36:50 2012] Offset between fit and detection position for source 11 = 0.005755 pixels
[Wed Jul 11 06:36:50 2012] 368.604000 total counts/ 189.003000 bgd. counts: snr = 13.063947
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.005755 pixels
  Position = (253.1, 137.4) = 21 15 53.90 -58 51 58.5
  Extent = 5.0 (4.2-5.7)", rotation angle = 0
  Source counts = 179.6 +/- 19.2
  Background counts = 189.0
  Rate = 0.01 +/- 0.001
[Wed Jul 11 06:36:50 2012] Vigneting correction estimate = 1.000000
[Wed Jul 11 06:36:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jul 11 06:36:50 2012] Assessing source extent using major axis lower bound
[Wed Jul 11 06:36:50 2012] Source does appear to be extended
[Wed Jul 11 06:36:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jul 11 07:42:37 2012] XMMSAS src. selection expression = ellipse(21971.402740, 11907.988200, 299.831409, 299.831409, 0.000000, X, Y)
[Wed Jul 11 07:42:37 2012] Writing source region out to fullrun_mos2_xmm0111250101_pi300-10000_pass1_cl_src11_src.reg
[Wed Jul 11 07:42:37 2012] Extracting stamp from image fullrun_mos2_xmm0111250101_pi300-10000_cl_sm2.00.img.gz, (236, 120) - (270, 155)
[Wed Jul 11 07:42:37 2012] XMMSAS bgd. selection expression = annulus(21971.402740, 11907.988200, 499.719014, 999.438029, X, Y)
[Wed Jul 11 07:42:37 2012] Writing fullrun_mos2_xmm0111250101_pi300-10000_pass1_cl_src11.gif
[Wed Jul 11 07:44:56 2012] Mean detx,y = (6990.77, 11719.88) 
[Wed Jul 11 07:44:57 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Jul 11 07:45:01 2012] Binned source spectrum to 10 counts/bin
[Wed Jul 11 07:45:01 2012] Setting source spectrum file to fullrun_mos2_xmm0111250101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Jul 11 07:45:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111250101_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Wed Jul 11 07:52:22 2012] Updating aperture counts using extracted products
[Wed Jul 11 07:52:22 2012] Error reading totcts from fullrun_mos2_xmm0111250101_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Wed Jul 11 07:52:22 2012] Calculating source flux in energy range 0.30-8.00
[Wed Jul 11 07:52:22 2012] Using photon index=1.80, rate=0.0122, arf fullrun_mos2_xmm0111250101_pi300-10000_pass1_cl_src11.arf
[Wed Jul 11 07:52:22 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Jul 11 07:52:22 2012] Updating source flux to 4.8e-13