[Thu Sep 29 10:50:06 2011] Detection parameters:
  Position = (343.5, 163.0) = 14 12 45.64 -65 31 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 351.3 +/- 31.7
  Background counts = 177.2
  Rate = 0.003 +/- 0.0003

[Thu Sep 29 10:50:08 2011] Off-axis axis estimate = 10.35'
[Thu Sep 29 10:56:53 2011] Using EEF radius (= 11.60 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 10:56:53 2011] Initial guess for spatial extent in simple fitting = 11.60"
[Thu Sep 29 10:56:53 2011] source mask rpix=2.7, npix_max = 40, mask sum = 42, frac = 1.046
[Thu Sep 29 10:56:53 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 11.60"
[Thu Sep 29 13:53:17 2011] fullrun_pn_xmm0111240101_pi300-10000_cl_pass0_src20.ximg exists
[Thu Sep 29 13:53:17 2011] fullrun_pn_xmm0111240101_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Sep 29 13:53:17 2011] Fit fullrun_pn_xmm0111240101_pi300-10000_cl_pass0_src20 appears to have run properly
[Thu Sep 29 13:53:18 2011] fullrun_pn_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Sep 29 13:53:18 2011] fullrun_pn_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Sep 29 13:53:18 2011] Fit fullrun_pn_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Sep 29 16:45:09 2011] Spatial fit model total counts = 1803.370000, observed total counts = 1809.000000
[Thu Sep 29 16:45:09 2011] Offset between fit and detection position for source 23 = 1.551705 pixels
[Thu Sep 29 16:45:09 2011] 1810.394000 total counts/ 708.484000 bgd. counts: snr = 41.398166
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 1.551705 pixels
  Position = (344.8, 162.1) = 14 12 44.74 -65 31 47.6
  Extent = 16.8 (14.8-19.7)", rotation angle = 0
  Source counts = 1101.9 +/- 42.5
  Background counts = 708.5
  Rate = 0.01 +/- 0.0005
[Thu Sep 29 16:45:09 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 16:45:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 16:45:09 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 16:45:09 2011] Source does appear to be extended
[Thu Sep 29 16:45:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 16:45:09 2011] Source is confused with source 89
[Thu Sep 29 16:45:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 16:45:44 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Sep 29 16:45:44 2011] Initial guess for spatial extent in simple fitting = 16.77"
[Thu Sep 29 16:45:44 2011] source mask rpix=3.9, npix_max = 75, mask sum = 72, frac = 0.949
[Thu Sep 29 16:45:44 2011] Giving source the simple spatial ID 20 for pass 1, mean size = 16.77"
[Thu Sep 29 18:51:23 2011] fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_src20.ximg exists
[Thu Sep 29 18:51:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_src20.csv
[Thu Sep 29 18:51:23 2011] fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Sep 29 18:51:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_src20.csv
[Thu Sep 29 18:51:23 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 18:51:24 2011] fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Sep 29 18:51:24 2011] fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Sep 29 18:51:24 2011] Fit fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Thu Sep 29 20:57:00 2011] Warning, spatial fit 20 centroid is now closest to src. 88
[Thu Sep 29 20:57:01 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 20:57:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 20:57:01 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 20:57:01 2011] Source does appear to be extended
[Thu Sep 29 20:57:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 20:57:32 2011] Counts = 1101.910000, rescaling region sizes by 2.000000
[Thu Sep 29 20:57:32 2011] XMMSAS src. selection expression = ellipse(29948.074600, 14054.455000, 2012.196058, 2012.196058, 0.000000, X, Y)
[Thu Sep 29 20:57:32 2011] Writing source region out to fullrun_pn_xmm0111240101_pi300-10000_pass1_cl_src23_src.reg
[Thu Sep 29 20:57:32 2011] Extracting stamp from image fullrun_pn_xmm0111240101_pi300-10000_cl_sm2.00.img.gz, (229, 46) - (460, 278)
[Thu Sep 29 20:57:32 2011] XMMSAS bgd. selection expression = annulus(29948.074600, 14054.455000, 6707.320193, 13414.640386, X, Y) && !ellipse(28834.396660, 24701.195400, 425.892812, 425.892812, 0.000000, X, Y) && !ellipse(30618.994690, 23869.472137, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26711.582000, 27806.871400, 2328.384067, 2328.384067, 0.000000, X, Y) && !ellipse(41551.603516, 24385.445221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24549.758200, 23738.469800, 409.348012, 409.348012, 0.000000, X, Y) && !ellipse(38674.802277, 21896.361893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17497.738600, 13078.758620, 567.120816, 567.120816, 0.000000, X, Y) && !ellipse(33014.456080, 20940.335000, 307.496009, 307.496009, 0.000000, X, Y) && !ellipse(28096.344000, 21199.640000, 1432.168041, 1432.168041, 0.000000, X, Y) && !ellipse(16395.563339, 15534.096603, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17509.903030, 27616.363647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16378.773800, 23692.496360, 536.216815, 536.216815, 0.000000, X, Y) && !ellipse(23328.200800, 22291.550800, 395.137611, 395.137611, 0.000000, X, Y) && !ellipse(24032.385200, 20000.128000, 462.538413, 462.538413, 0.000000, X, Y) && !ellipse(34170.104000, 27182.559200, 512.912015, 512.912015, 0.000000, X, Y) && !ellipse(20976.764000, 12042.573508, 2022.640058, 2022.640058, 0.000000, X, Y) && !ellipse(31414.056400, 26752.166000, 1400.256040, 689.294420, 90.000000, X, Y) && !ellipse(36076.927880, 26531.468476, 539.142270, 410.256779, 79.557261, X, Y) && !ellipse(20280.893800, 26302.807200, 424.481644, 424.481644, 0.000000, X, Y) && !ellipse(24532.300201, 26046.728912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26793.298200, 25557.207400, 350.867210, 350.867210, 0.000000, X, Y) && !ellipse(27210.286200, 25399.986000, 1156.136033, 1156.136033, 0.000000, X, Y) && !ellipse(39686.512000, 24696.840000, 1956.136056, 1956.136056, 0.000000, X, Y) && !ellipse(24255.116800, 25185.181260, 345.421610, 345.421610, 0.000000, X, Y) && !ellipse(17414.955200, 24935.437195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27424.324000, 24827.690000, 2310.376066, 2310.376066, 0.000000, X, Y) && !ellipse(18136.204529, 12667.586258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31674.738000, 24007.128000, 1446.640042, 1446.640042, 0.000000, X, Y) && !ellipse(27528.105164, 24227.555939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31240.911407, 24231.020752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39804.498657, 23464.173950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27612.054800, 23877.192000, 1183.472034, 1183.472034, 0.000000, X, Y) && !ellipse(38108.945800, 23147.355400, 472.949614, 317.410409, 132.537936, X, Y) && !ellipse(24112.940979, 22422.574097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16204.810760, 22104.205600, 377.600811, 377.600811, 0.000000, X, Y) && !ellipse(27937.300090, 22518.730794, 1478.304043, 626.314551, 249.365305, X, Y) && !ellipse(26590.465780, 21294.367600, 378.152011, 378.152011, 0.000000, X, Y) && !ellipse(23177.730920, 20519.486600, 353.232810, 353.232810, 0.000000, X, Y) && !ellipse(28425.276733, 20404.106659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20145.976746, 19855.999756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28543.360800, 19799.690300, 1478.304043, 675.582419, 255.668000, X, Y) && !ellipse(30882.456200, 19464.320600, 309.045609, 309.045609, 0.000000, X, Y) && !ellipse(22021.920800, 19241.311000, 583.550417, 288.941608, 30.359400, X, Y) && !ellipse(28786.019600, 18765.579200, 2983.408086, 673.904819, 75.064000, X, Y) && !ellipse(27304.954600, 18465.048260, 486.631214, 486.631214, 0.000000, X, Y) && !ellipse(25839.163800, 18535.008400, 455.048813, 455.048813, 0.000000, X, Y) && !ellipse(28903.974000, 18656.382000, 1513.512044, 1513.512044, 0.000000, X, Y) && !ellipse(33535.548200, 16876.454000, 1791.584052, 1791.584052, 0.000000, X, Y) && !ellipse(25442.489373, 17166.964200, 284.612008, 284.612008, 0.000000, X, Y) && !ellipse(29291.554600, 16507.952000, 1745.264050, 637.652018, 252.679000, X, Y) && !ellipse(29497.176000, 15998.884000, 2123.376061, 2123.376061, 0.000000, X, Y) && !ellipse(29490.333800, 15736.978000, 1013.648029, 1013.648029, 0.000000, X, Y) && !ellipse(29791.974800, 14457.548800, 1826.256053, 611.866418, 69.015000, X, Y) && !ellipse(24763.521393, 14735.628403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22732.822235, 14759.296661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23828.263428, 13624.943359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22513.044220, 13376.950348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18676.554000, 12097.804000, 2052.776059, 2052.776059, 0.000000, X, Y)
[Thu Sep 29 20:57:32 2011] Writing fullrun_pn_xmm0111240101_pi300-10000_pass1_cl_src23.gif
[Thu Sep 29 21:31:08 2011] Mean detx,y = (156.08, 13251.63) 
[Thu Sep 29 21:31:15 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Sep 29 21:33:16 2011] Binned source spectrum to 10 counts/bin
[Thu Sep 29 21:33:17 2011] Setting source spectrum file to fullrun_pn_xmm0111240101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Thu Sep 29 21:33:17 2011] Setting bgd. spectrum file to fullrun_pn_xmm0111240101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Sep 30 06:58:36 2011] Updating aperture counts using extracted products
[Fri Sep 30 06:58:36 2011] Error reading totcts from fullrun_pn_xmm0111240101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Sep 30 06:58:38 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 06:58:38 2011] Using photon index=1.80, rate=0.0133, arf fullrun_pn_xmm0111240101_pi300-10000_pass1_cl_src23.arf
[Fri Sep 30 06:58:38 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 06:58:38 2011] Updating source flux to 6.8e-14
[Fri Sep 30 07:03:39 2011] Flag c found in src. 23 procflags, skipping spectral fitting