[Thu Sep 29 10:50:05 2011] Detection parameters:
  Position = (332.0, 284.3) = 14 12 53.85 -65 22 55.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5913.0 +/- 96.0
  Background counts = 246.8
  Rate = 0.07 +/- 0.001

[Thu Sep 29 10:50:08 2011] Off-axis axis estimate = 2.64'
[Thu Sep 29 10:56:53 2011] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 10:56:53 2011] Initial guess for spatial extent in simple fitting = 7.75"
[Thu Sep 29 10:56:53 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.961
[Thu Sep 29 10:56:53 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.75"
[Thu Sep 29 13:53:17 2011] fullrun_pn_xmm0111240101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Sep 29 13:53:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111240101_pi300-10000_cl_pass0_src1.csv
[Thu Sep 29 13:53:17 2011] fullrun_pn_xmm0111240101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Sep 29 13:53:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111240101_pi300-10000_cl_pass0_src1.csv
[Thu Sep 29 13:53:17 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111240101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111240101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 13:53:18 2011] fullrun_pn_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 29 13:53:18 2011] fullrun_pn_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 29 13:53:18 2011] Fit fullrun_pn_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 16:45:09 2011] Spatial fit model total counts = 6700.000000, observed total counts = 6700.000000
[Thu Sep 29 16:45:09 2011] Offset between fit and detection position for source 1 = 0.166585 pixels
[Thu Sep 29 16:45:09 2011] 6747.730000 total counts/ 3100.380000 bgd. counts: snr = 65.504325
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.166585 pixels
  Position = (332.0, 284.5) = 14 12 53.83 -65 22 55.4
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 3647.3 +/- 82.1
  Background counts = 3100.4
  Rate = 0.04 +/- 0.001
[Thu Sep 29 16:45:09 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 16:45:09 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 16:45:09 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 16:45:09 2011] Source does appear to be extended
[Thu Sep 29 16:45:09 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 16:45:44 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 16:45:44 2011] Initial guess for spatial extent in simple fitting = 5.29"
[Thu Sep 29 16:45:44 2011] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.017
[Thu Sep 29 16:45:44 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.29"
[Thu Sep 29 18:51:23 2011] fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Sep 29 18:51:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_src1.csv
[Thu Sep 29 18:51:23 2011] fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Sep 29 18:51:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_src1.csv
[Thu Sep 29 18:51:23 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 18:51:24 2011] fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 29 18:51:24 2011] fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 29 18:51:24 2011] Fit fullrun_pn_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 29 20:57:00 2011] Spatial fit model total counts = 6684.770000, observed total counts = 6700.000000
[Thu Sep 29 20:57:00 2011] Offset between fit and detection position for source 1 = 0.001189 pixels
[Thu Sep 29 20:57:00 2011] 6732.320000 total counts/ 3092.020000 bgd. counts: snr = 65.466034
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001189 pixels
  Position = (332.0, 284.5) = 14 12 53.83 -65 22 55.4
  Extent = 5.3 (5.1-5.4)", rotation angle = 0
  Source counts = 3640.3 +/- 82.1
  Background counts = 3092.0
  Rate = 0.04 +/- 0.001
[Thu Sep 29 20:57:01 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 20:57:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 20:57:01 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 20:57:01 2011] Source does appear to be extended
[Thu Sep 29 20:57:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 20:57:01 2011] Source is confused with source 61
[Thu Sep 29 20:57:31 2011] Counts = 3640.300000, rescaling region sizes by 2.000000
[Thu Sep 29 20:57:31 2011] XMMSAS src. selection expression = ellipse(28834.396660, 24701.195400, 638.839218, 638.839218, 0.000000, X, Y)
[Thu Sep 29 20:57:31 2011] Writing source region out to fullrun_pn_xmm0111240101_pi300-10000_pass1_cl_src1_src.reg
[Thu Sep 29 20:57:31 2011] Extracting stamp from image fullrun_pn_xmm0111240101_pi300-10000_cl_sm2.00.img.gz, (295, 248) - (369, 321)
[Thu Sep 29 20:57:31 2011] XMMSAS bgd. selection expression = annulus(28834.396660, 24701.195400, 2129.464061, 4258.928123, X, Y) && !ellipse(30618.994690, 23869.472137, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26711.582000, 27806.871400, 2328.384067, 2328.384067, 0.000000, X, Y) && !ellipse(24549.758200, 23738.469800, 409.348012, 409.348012, 0.000000, X, Y) && !ellipse(33014.456080, 20940.335000, 307.496009, 307.496009, 0.000000, X, Y) && !ellipse(28096.344000, 21199.640000, 1432.168041, 1432.168041, 0.000000, X, Y) && !ellipse(26647.288574, 29777.183136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27158.416000, 30003.921600, 1290.600037, 620.844818, 82.405000, X, Y) && !ellipse(26487.513800, 29055.590600, 626.093618, 626.093618, 0.000000, X, Y) && !ellipse(33423.934906, 28784.568573, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25195.454000, 28954.629000, 1229.584035, 1229.584035, 0.000000, X, Y) && !ellipse(31414.056400, 26752.166000, 1400.256040, 689.294420, 90.000000, X, Y) && !ellipse(24532.300201, 26046.728912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26793.298200, 25557.207400, 350.867210, 350.867210, 0.000000, X, Y) && !ellipse(27210.286200, 25399.986000, 1156.136033, 1156.136033, 0.000000, X, Y) && !ellipse(24255.116800, 25185.181260, 345.421610, 345.421610, 0.000000, X, Y) && !ellipse(27424.324000, 24827.690000, 2310.376066, 2310.376066, 0.000000, X, Y) && !ellipse(31674.738000, 24007.128000, 1446.640042, 1446.640042, 0.000000, X, Y) && !ellipse(27528.105164, 24227.555939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31240.911407, 24231.020752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27612.054800, 23877.192000, 1183.472034, 1183.472034, 0.000000, X, Y) && !ellipse(24112.940979, 22422.574097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27937.300090, 22518.730794, 1478.304043, 626.314551, 249.365305, X, Y) && !ellipse(26590.465780, 21294.367600, 378.152011, 378.152011, 0.000000, X, Y) && !ellipse(28425.276733, 20404.106659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28543.360800, 19799.690300, 1478.304043, 675.582419, 255.668000, X, Y) && !ellipse(28786.019600, 18765.579200, 2983.408086, 673.904819, 75.064000, X, Y)
[Thu Sep 29 20:57:31 2011] Writing fullrun_pn_xmm0111240101_pi300-10000_pass1_cl_src1.gif
[Thu Sep 29 20:58:03 2011] Mean detx,y = (1502.13, 3298.06) 
[Thu Sep 29 20:58:07 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Sep 29 20:58:30 2011] Binned source spectrum to 10 counts/bin
[Thu Sep 29 20:58:30 2011] Setting source spectrum file to fullrun_pn_xmm0111240101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Sep 29 20:58:30 2011] Setting bgd. spectrum file to fullrun_pn_xmm0111240101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Sep 30 06:58:36 2011] Updating aperture counts using extracted products
[Fri Sep 30 06:58:36 2011] Error reading totcts from fullrun_pn_xmm0111240101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 06:58:37 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 06:58:37 2011] Using photon index=1.80, rate=0.0438, arf fullrun_pn_xmm0111240101_pi300-10000_pass1_cl_src1.arf
[Fri Sep 30 06:58:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 06:58:37 2011] Updating source flux to 1.3e-13
[Fri Sep 30 07:03:39 2011] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Sep 30 07:11:50 2011] Reading fit data from xmm0111240101/analysis//spectral/fullrun_pn_xmm0111240101_pi300-10000_pass1_cl_src1_pl.csv
[Fri Sep 30 07:11:50 2011] Spectral fit parameter nH value = 1.13284e+22
[Fri Sep 30 07:11:50 2011] Spectral fit parameter PhoIndex value = 3.48709
[Fri Sep 30 07:11:50 2011] Failed to get F(0.3-8.0) from xmm0111240101/analysis//spectral/fullrun_pn_xmm0111240101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 07:11:50 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 07:11:50 2011] Using Nh = 1.1e+22, photon index=3.49, rate=0.0438, arf fullrun_pn_xmm0111240101_pi300-10000_pass1_cl_src1.arf
[Fri Sep 30 07:11:50 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 07:11:50 2011] Updating source flux to 1.6e-13