[Thu Sep 29 10:51:16 2011] Detection parameters:
  Position = (259.4, 154.9) = 14 13 44.50 -65 32 19.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.1 +/- 15.2
  Background counts = 31.9
  Rate = 0.001 +/- 0.0001

[Thu Sep 29 10:51:17 2011] Off-axis axis estimate = 10.78'
[Thu Sep 29 15:01:54 2011] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 15:01:54 2011] Initial guess for spatial extent in simple fitting = 11.82"
[Thu Sep 29 15:01:54 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.014
[Thu Sep 29 15:01:54 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 11.82"
[Thu Sep 29 16:44:51 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src29.ximg exists
[Thu Sep 29 16:44:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src29.csv
[Thu Sep 29 16:44:51 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src29_1.ximg exists
[Thu Sep 29 16:44:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src29.csv
[Thu Sep 29 16:44:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 16:44:52 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Thu Sep 29 16:44:52 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Thu Sep 29 16:44:52 2011] Fit fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Thu Sep 29 16:45:28 2011] Source 23 is offset by -3.971351 and -5.793590 pixels which is larger than
2 X fitted extent = 1.307278 x 1.307278, not incorporating fit results
[Thu Sep 29 16:45:28 2011] Spatial fit model total counts = 427.530000, observed total counts = 427.000000
[Thu Sep 29 16:45:28 2011] Offset between fit and detection position for source 23 = 0.066467 pixels
[Thu Sep 29 16:45:28 2011] 425.583800 total counts/ 355.350000 bgd. counts: snr = 3.725787
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.066467 pixels
  Position = (259.4, 154.8) = 14 13 44.50 -65 32 19.4
  Extent = 4.1 (3.3-5.1)", rotation angle = 0
  Source counts = 70.2 +/- 20.6
  Background counts = 355.4
  Rate = 0.0007 +/- 0.0002
[Thu Sep 29 16:45:28 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 16:45:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 16:45:28 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 16:45:28 2011] Source does appear to be extended
[Thu Sep 29 16:45:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 19:34:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 19:34:16 2011] Initial guess for spatial extent in simple fitting = 4.09"
[Thu Sep 29 19:34:16 2011] source mask rpix=0.9, npix_max = 8, mask sum = 9, frac = 1.085
[Thu Sep 29 19:34:16 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 4.09"
[Thu Sep 29 20:56:44 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_src28.ximg exists
[Thu Sep 29 20:56:44 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_src28_1.ximg exists
[Thu Sep 29 20:56:44 2011] Fit fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_src28 appears to have run properly
[Thu Sep 29 20:56:45 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Thu Sep 29 20:56:45 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Thu Sep 29 20:56:45 2011] Fit fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Thu Sep 29 20:57:16 2011] Spatial fit model total counts = 385.905000, observed total counts = 385.000000
[Thu Sep 29 20:57:16 2011] Offset between fit and detection position for source 23 = 0.008507 pixels
[Thu Sep 29 20:57:16 2011] 382.121800 total counts/ 310.985000 bgd. counts: snr = 4.033895
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 0.008507 pixels
  Position = (259.4, 154.8) = 14 13 44.50 -65 32 19.4
  Extent = 4.2 (3.3-5.1)", rotation angle = 0
  Source counts = 71.1 +/- 19.5
  Background counts = 311.0
  Rate = 0.0007 +/- 0.0002
[Thu Sep 29 20:57:16 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 20:57:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 20:57:16 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 20:57:16 2011] Source does appear to be extended
[Thu Sep 29 20:57:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:38:50 2011] XMMSAS src. selection expression = ellipse(22522.676400, 13421.080640, 249.558607, 249.558607, 0.000000, X, Y)
[Fri Sep 30 04:38:50 2011] Writing source region out to fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src23_src.reg
[Fri Sep 30 04:38:50 2011] Extracting stamp from image fullrun_mos2_xmm0111240101_pi300-10000_cl_sm2.00.img.gz, (245, 140) - (274, 169)
[Fri Sep 30 04:38:50 2011] XMMSAS bgd. selection expression = annulus(22522.676400, 13421.080640, 415.931012, 831.862024, X, Y) && !ellipse(22711.911224, 14800.108444, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 30 04:38:50 2011] Writing fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src23.gif
[Fri Sep 30 04:53:31 2011] Mean detx,y = (7223.55, -13088.08) 
[Fri Sep 30 04:53:32 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 04:53:39 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 04:53:39 2011] Setting source spectrum file to fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Sep 30 04:53:39 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Sep 30 05:43:23 2011] Not generating rmf since there are only 71 counts
[Fri Sep 30 05:43:23 2011] rmf not generated due to insufficient counts
[Fri Sep 30 06:58:42 2011] Updating aperture counts using extracted products
[Fri Sep 30 06:58:42 2011] Error reading totcts from fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Sep 30 06:58:43 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 06:58:43 2011] Using photon index=1.80, rate=0.000685, arf fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src23.arf
[Fri Sep 30 06:58:43 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 06:58:43 2011] Updating source flux to 3.4e-14
[Fri Sep 30 07:01:16 2011] Flag b found in src. 23 procflags, skipping spectral fitting
[Fri Sep 30 07:01:16 2011] Source 23 has fewer than 100.000000 counts, skipping spectral fitting