[Thu Sep 29 10:51:16 2011] Detection parameters:
  Position = (308.3, 320.1) = 14 13 10.37 -65 20 20.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57874.2 +/- 284.7
  Background counts = 62.3
  Rate = 0.6 +/- 0.003

[Thu Sep 29 10:51:17 2011] Off-axis axis estimate = 1.72'
[Thu Sep 29 15:01:54 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 15:01:54 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Sep 29 15:01:54 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu Sep 29 15:01:54 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu Sep 29 16:44:51 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Sep 29 16:44:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src1.csv
[Thu Sep 29 16:44:51 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Sep 29 16:44:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src1.csv
[Thu Sep 29 16:44:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 16:44:51 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 29 16:44:51 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 29 16:44:51 2011] Fit fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 16:45:28 2011] Spatial fit model total counts = 68813.800000, observed total counts = 68791.000000
[Thu Sep 29 16:45:28 2011] Offset between fit and detection position for source 2 = 0.825980 pixels
[Thu Sep 29 16:45:28 2011] 67568.100000 total counts/ 15313.800000 bgd. counts: snr = 422.260589
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.825980 pixels
  Position = (307.5, 320.3) = 14 13 10.92 -65 20 19.8
  Extent = 8.6 (8.6-8.7)", rotation angle = 0
  Source counts = 52254.3 +/- 259.9
  Background counts = 15313.8
  Rate = 0.5 +/- 0.003
[Thu Sep 29 16:45:28 2011] Spatial fit model total counts = 66592.100000, observed total counts = 66585.000000
[Thu Sep 29 16:45:28 2011] Offset between fit and detection position for source 2 = 0.104942 pixels
[Thu Sep 29 16:45:28 2011] Warning, changing simple spatial fit ID from 1 to 2
[Thu Sep 29 16:45:28 2011] 62933.010000 total counts/ 9828.010000 bgd. counts: snr = 535.676530
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.104942 pixels
  Position = (307.5, 320.2) = 14 13 10.90 -65 20 20.2
  Extent = 9.3 (9.2-9.4)", rotation angle = 0
  Source counts = 53105.0 +/- 250.9
  Background counts = 9828.0
  Rate = 0.5 +/- 0.002
[Thu Sep 29 16:45:28 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 16:45:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 16:45:28 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 16:45:28 2011] Source does appear to be extended
[Thu Sep 29 16:45:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 16:45:28 2011] Source is confused with source 1
[Thu Sep 29 16:45:28 2011] Source is confused with source 27
[Thu Sep 29 19:34:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 19:34:16 2011] Initial guess for spatial extent in simple fitting = 9.29"
[Thu Sep 29 19:34:16 2011] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.899
[Thu Sep 29 19:34:16 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 9.29"
[Thu Sep 29 20:56:44 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Sep 29 20:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_src1.csv
[Thu Sep 29 20:56:44 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Sep 29 20:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_src1.csv
[Thu Sep 29 20:56:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 20:56:45 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 29 20:56:45 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 29 20:56:45 2011] Fit fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 29 20:57:15 2011] Spatial fit model total counts = 70767.200000, observed total counts = 70751.000000
[Thu Sep 29 20:57:15 2011] Offset between fit and detection position for source 2 = 0.055016 pixels
[Thu Sep 29 20:57:15 2011] 69979.100000 total counts/ 14621.500000 bgd. counts: snr = 457.805798
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.055016 pixels
  Position = (307.4, 320.2) = 14 13 10.93 -65 20 20.2
  Extent = 9.2 (9.1-9.2)", rotation angle = 0
  Source counts = 55357.6 +/- 264.5
  Background counts = 14621.5
  Rate = 0.5 +/- 0.003
[Thu Sep 29 20:57:16 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 20:57:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 20:57:16 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 20:57:16 2011] Source does appear to be extended
[Thu Sep 29 20:57:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:38:50 2011] Counts = 55357.600000, rescaling region sizes by 3.000000
[Fri Sep 30 04:38:50 2011] XMMSAS src. selection expression = ellipse(26698.520200, 27806.833600, 1648.258247, 1648.258247, 0.000000, X, Y)
[Fri Sep 30 04:38:50 2011] Writing source region out to fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src2_src.reg
[Fri Sep 30 04:38:50 2011] Extracting stamp from image fullrun_mos2_xmm0111240101_pi300-10000_cl_sm2.00.img.gz, (213, 225) - (402, 415)
[Fri Sep 30 04:38:50 2011] XMMSAS bgd. selection expression = annulus(26698.520200, 27806.833600, 8241.291237, 16482.582474, X, Y) && !ellipse(26786.860809, 27384.452148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24543.928200, 30443.973800, 377.454877, 377.454877, 0.000000, X, Y) && !ellipse(33160.297200, 20981.275000, 531.765615, 531.765615, 0.000000, X, Y) && !ellipse(38705.995420, 21901.332420, 372.802411, 372.802411, 0.000000, X, Y) && !ellipse(24066.499207, 19913.493088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27292.670000, 27420.330000, 1171.656034, 1171.656034, 0.000000, X, Y) && !ellipse(29012.510000, 25170.199240, 1231.464035, 1231.464035, 0.000000, X, Y) && !ellipse(23498.428694, 34887.867917, 996.474040, 301.354474, 345.835188, X, Y) && !ellipse(24650.466860, 24475.886200, 687.487220, 462.888013, 8.056050, X, Y) && !ellipse(16338.464279, 35246.673584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32680.226685, 12494.701370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38343.911285, 29003.316437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41532.200562, 24496.775909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16731.112579, 32549.607208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16478.449371, 15586.313065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25847.686000, 18517.504200, 443.163033, 443.163033, 0.000000, X, Y) && !ellipse(30452.822200, 41260.163200, 416.462412, 416.462412, 0.000000, X, Y) && !ellipse(26832.931904, 25573.464200, 293.336808, 293.336808, 0.000000, X, Y) && !ellipse(32699.008362, 32107.319153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16358.293365, 23688.340729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17525.019440, 27597.512939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28829.595215, 37460.147614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19644.429764, 23621.638428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27889.141357, 26758.932556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22711.911224, 14800.108444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24255.975200, 25135.498000, 532.558415, 532.558415, 0.000000, X, Y) && !ellipse(22522.676400, 13421.080640, 332.744810, 332.744810, 0.000000, X, Y) && !ellipse(35026.682400, 14738.184000, 787.924823, 248.883207, 334.440348, X, Y) && !ellipse(34170.367188, 27162.611176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15410.086823, 18422.700775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24174.420000, 25697.408000, 2173.264063, 2173.264063, 186.877000, X, Y) && !ellipse(39868.676025, 23454.862762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24770.835999, 14744.052811, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18493.104187, 36368.298676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19297.774536, 39091.925964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38155.767944, 23042.661499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28931.659851, 25603.596558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43805.391510, 26093.972504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16192.079239, 22146.679382, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 30 04:38:50 2011] Writing fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src2.gif
[Fri Sep 30 04:39:02 2011] Mean detx,y = (31.05, 3.29) 
[Fri Sep 30 04:39:05 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 04:43:30 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 04:43:31 2011] Setting source spectrum file to fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Sep 30 04:43:31 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Sep 30 06:58:41 2011] Updating aperture counts using extracted products
[Fri Sep 30 06:58:41 2011] Error reading totcts from fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Sep 30 06:58:42 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 06:58:42 2011] Using photon index=1.80, rate=0.533, arf fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src2.arf
[Fri Sep 30 06:58:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 06:58:42 2011] Updating source flux to 5.7e-12
[Fri Sep 30 07:01:16 2011] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Sep 30 07:03:39 2011] Reading fit data from xmm0111240101/analysis//spectral/fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src2_pl.csv
[Fri Sep 30 07:03:39 2011] Spectral fit parameter nH value = 3.34402e+21
[Fri Sep 30 07:03:39 2011] Spectral fit parameter PhoIndex value = 0.929091
[Fri Sep 30 07:03:39 2011] Failed to get F(0.3-8.0) from xmm0111240101/analysis//spectral/fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 07:03:39 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 07:03:39 2011] Using Nh = 3.3e+21, photon index=0.93, rate=0.533, arf fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src2.arf
[Fri Sep 30 07:03:39 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 07:03:39 2011] Updating source flux to 9.7e-12