[Thu Sep 29 10:51:16 2011] Detection parameters:
  Position = (308.5, 315.3) = 14 13 10.22 -65 20 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 9642.3 +/- 134.0
  Background counts = 62.5
  Rate = 0.09 +/- 0.001

[Thu Sep 29 10:51:17 2011] Off-axis axis estimate = 1.42'
[Thu Sep 29 15:01:54 2011] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 15:01:54 2011] Initial guess for spatial extent in simple fitting = 7.14"
[Thu Sep 29 15:01:54 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.090
[Thu Sep 29 15:01:54 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 7.14"
[Thu Sep 29 16:44:51 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src2.ximg exists
[Thu Sep 29 16:44:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src2.csv
[Thu Sep 29 16:44:51 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src2_1.ximg exists
[Thu Sep 29 16:44:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src2.csv
[Thu Sep 29 16:44:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 16:44:51 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Thu Sep 29 16:44:51 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Thu Sep 29 16:44:51 2011] Fit fullrun_mos2_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Thu Sep 29 16:45:28 2011] Warning, spatial fit 2 centroid is now closest to src. 2
[Thu Sep 29 16:45:28 2011] Source 1 is offset by -2.663393 and -3.124780 pixels which is larger than
2 X fitted extent = 2.496120 x 2.496120, not incorporating fit results
[Thu Sep 29 16:45:28 2011] Warning: source 49 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.834543 pixels away
[Thu Sep 29 16:45:28 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 16:45:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 16:45:28 2011] Assessing source extent using major
[Thu Sep 29 16:45:28 2011] Source does appear to be extended
[Thu Sep 29 16:45:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 16:45:28 2011] Source is confused with source 2
[Thu Sep 29 19:34:16 2011] Using EEF radius (= 7.14 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 19:34:16 2011] Initial guess for spatial extent in simple fitting = 7.14"
[Thu Sep 29 19:34:16 2011] source mask rpix=1.6, npix_max = 18, mask sum = 20, frac = 1.090
[Thu Sep 29 19:34:16 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 7.14"
[Thu Sep 29 20:56:44 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_src2.ximg exists
[Thu Sep 29 20:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_src2.csv
[Thu Sep 29 20:56:44 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Sep 29 20:56:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_src2.csv
[Thu Sep 29 20:56:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 20:56:45 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Sep 29 20:56:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Sep 29 20:56:45 2011] fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Sep 29 20:56:45 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Sep 29 20:56:45 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 20:57:15 2011] Spatial fit model total counts = 36990.100000, observed total counts = 66585.000000
[Thu Sep 29 20:57:15 2011] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Sep 29 20:57:16 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 20:57:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 20:57:16 2011] Assessing source extent using major
[Thu Sep 29 20:57:16 2011] Source does appear to be extended
[Thu Sep 29 20:57:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 04:38:50 2011] Counts = 9642.294922, rescaling region sizes by 2.000000
[Fri Sep 30 04:38:50 2011] XMMSAS src. selection expression = ellipse(26786.860809, 27384.452148, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Sep 30 04:38:50 2011] Writing source region out to fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src1_src.reg
[Fri Sep 30 04:38:50 2011] Extracting stamp from image fullrun_mos2_xmm0111240101_pi300-10000_cl_sm2.00.img.gz, (233, 240) - (383, 390)
[Fri Sep 30 04:38:50 2011] XMMSAS bgd. selection expression = annulus(26786.860809, 27384.452148, 4350.000000, 8700.000000, X, Y) && !ellipse(26698.520200, 27806.833600, 2197.677663, 2197.677663, 0.000000, X, Y) && !ellipse(24543.928200, 30443.973800, 377.454877, 377.454877, 0.000000, X, Y) && !ellipse(33160.297200, 20981.275000, 531.765615, 531.765615, 0.000000, X, Y) && !ellipse(24066.499207, 19913.493088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27292.670000, 27420.330000, 1171.656034, 1171.656034, 0.000000, X, Y) && !ellipse(29012.510000, 25170.199240, 1231.464035, 1231.464035, 0.000000, X, Y) && !ellipse(23498.428694, 34887.867917, 996.474040, 301.354474, 345.835188, X, Y) && !ellipse(24650.466860, 24475.886200, 687.487220, 462.888013, 8.056050, X, Y) && !ellipse(25847.686000, 18517.504200, 443.163033, 443.163033, 0.000000, X, Y) && !ellipse(26832.931904, 25573.464200, 293.336808, 293.336808, 0.000000, X, Y) && !ellipse(32699.008362, 32107.319153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17525.019440, 27597.512939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19644.429764, 23621.638428, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27889.141357, 26758.932556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24255.975200, 25135.498000, 532.558415, 532.558415, 0.000000, X, Y) && !ellipse(34170.367188, 27162.611176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24174.420000, 25697.408000, 2173.264063, 2173.264063, 186.877000, X, Y) && !ellipse(18493.104187, 36368.298676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28931.659851, 25603.596558, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 30 04:38:50 2011] Writing fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src1.gif
[Fri Sep 30 04:43:44 2011] Mean detx,y = (33.58, -26.03) 
[Fri Sep 30 04:43:46 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 04:45:18 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 04:45:18 2011] Setting source spectrum file to fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 04:45:18 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Sep 30 05:02:28 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Sep 30 05:02:28 2011] rmf not generated due to insufficient counts
[Fri Sep 30 06:58:41 2011] Updating aperture counts using extracted products
[Fri Sep 30 06:58:41 2011] Error reading totcts from fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 06:58:42 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 06:58:42 2011] Using photon index=1.80, rate=0.0948, arf fullrun_mos2_xmm0111240101_pi300-10000_pass1_cl_src1.arf
[Fri Sep 30 06:58:42 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 06:58:42 2011] Updating source flux to 1.1e-12
[Fri Sep 30 07:01:16 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting