[Thu Sep 29 10:50:44 2011] Detection parameters:
  Position = (177.6, 211.8) = 14 14 41.56 -65 28 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.4 +/- 15.6
  Background counts = 32.2
  Rate = 0.001 +/- 0.0002

[Thu Sep 29 10:50:44 2011] Off-axis axis estimate = 10.78'
[Thu Sep 29 13:53:19 2011] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 13:53:19 2011] Initial guess for spatial extent in simple fitting = 11.82"
[Thu Sep 29 13:53:19 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.015
[Thu Sep 29 13:53:19 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 11.82"
[Thu Sep 29 15:01:53 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src33.ximg exists
[Thu Sep 29 15:01:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src33.csv
[Thu Sep 29 15:01:53 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src33_1.ximg exists
[Thu Sep 29 15:01:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src33.csv
[Thu Sep 29 15:01:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 15:01:53 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Thu Sep 29 15:01:53 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Thu Sep 29 15:01:53 2011] Fit fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Thu Sep 29 16:45:19 2011] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 14.107634 pixels away
[Thu Sep 29 16:45:19 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 16:45:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 16:45:19 2011] Assessing source extent using major
[Thu Sep 29 16:45:19 2011] Source does appear to be extended
[Thu Sep 29 16:45:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 18:51:25 2011] Using EEF radius (= 11.82 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 18:51:25 2011] Initial guess for spatial extent in simple fitting = 11.82"
[Thu Sep 29 18:51:25 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.015
[Thu Sep 29 18:51:25 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 11.82"
[Thu Sep 29 19:34:15 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src31.ximg exists
[Thu Sep 29 19:34:15 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src31.csv
[Thu Sep 29 19:34:15 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu Sep 29 19:34:16 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src31.csv
[Thu Sep 29 19:34:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 19:34:16 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu Sep 29 19:34:16 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Sep 29 19:34:16 2011] Fit fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Thu Sep 29 20:57:08 2011] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 14.118532 pixels away
[Thu Sep 29 20:57:08 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 20:57:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 20:57:08 2011] Assessing source extent using major
[Thu Sep 29 20:57:08 2011] Source does appear to be extended
[Thu Sep 29 20:57:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 03:03:55 2011] XMMSAS src. selection expression = ellipse(15406.142776, 18379.414505, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Sep 30 03:03:55 2011] Writing source region out to fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src56_src.reg
[Fri Sep 30 03:03:55 2011] Extracting stamp from image fullrun_mos1_xmm0111240101_pi300-10000_cl_sm2.00.img.gz, (140, 174) - (215, 249)
[Fri Sep 30 03:03:55 2011] XMMSAS bgd. selection expression = annulus(15406.142776, 18379.414505, 1087.500000, 2175.000000, X, Y) && !ellipse(16421.021088, 15540.420883, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 30 03:03:55 2011] Writing fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src56.gif
[Fri Sep 30 03:23:41 2011] Mean detx,y = (-6433.21, -13299.41) 
[Fri Sep 30 03:23:42 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 03:23:51 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 03:23:51 2011] Setting source spectrum file to fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Fri Sep 30 03:23:51 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Fri Sep 30 04:37:36 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Sep 30 04:37:36 2011] rmf not generated due to insufficient counts
[Fri Sep 30 06:58:40 2011] Updating aperture counts using extracted products
[Fri Sep 30 06:58:40 2011] Error reading totcts from fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Fri Sep 30 06:58:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 06:58:41 2011] Using photon index=1.80, rate=0.00111, arf fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src56.arf
[Fri Sep 30 06:58:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 06:58:41 2011] Updating source flux to 3.6e-14
[Fri Sep 30 06:58:45 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting