[Thu Sep 29 10:50:43 2011] Detection parameters:
  Position = (308.3, 320.1) = 14 13 10.36 -65 20 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56867.1 +/- 284.8
  Background counts = 53.4
  Rate = 0.6 +/- 0.003

[Thu Sep 29 10:50:44 2011] Off-axis axis estimate = 1.72'
[Thu Sep 29 13:53:19 2011] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 13:53:19 2011] Initial guess for spatial extent in simple fitting = 7.29"
[Thu Sep 29 13:53:19 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.845
[Thu Sep 29 13:53:19 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Thu Sep 29 15:01:52 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src1.ximg exists
[Thu Sep 29 15:01:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src1.csv
[Thu Sep 29 15:01:52 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Sep 29 15:01:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src1.csv
[Thu Sep 29 15:01:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 15:01:53 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Sep 29 15:01:53 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Sep 29 15:01:53 2011] Fit fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Thu Sep 29 16:45:19 2011] Spatial fit model total counts = 67098.500000, observed total counts = 67095.000000
[Thu Sep 29 16:45:19 2011] Offset between fit and detection position for source 3 = 0.827707 pixels
[Thu Sep 29 16:45:19 2011] 66498.200000 total counts/ 17050.000000 bgd. counts: snr = 378.693888
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.827707 pixels
  Position = (307.5, 320.3) = 14 13 10.92 -65 20 19.8
  Extent = 8.9 (8.8-9.0)", rotation angle = 0
  Source counts = 49448.2 +/- 257.9
  Background counts = 17050.0
  Rate = 0.5 +/- 0.002
[Thu Sep 29 16:45:19 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 16:45:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 16:45:19 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 16:45:19 2011] Source does appear to be extended
[Thu Sep 29 16:45:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 18:51:25 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Sep 29 18:51:25 2011] Initial guess for spatial extent in simple fitting = 8.90"
[Thu Sep 29 18:51:25 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.965
[Thu Sep 29 18:51:25 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 8.90"
[Thu Sep 29 19:34:15 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src1.ximg exists
[Thu Sep 29 19:34:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src1.csv
[Thu Sep 29 19:34:15 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Sep 29 19:34:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src1.csv
[Thu Sep 29 19:34:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 19:34:16 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Sep 29 19:34:16 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Sep 29 19:34:16 2011] Fit fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Sep 29 20:57:08 2011] Spatial fit model total counts = 66794.100000, observed total counts = 66794.000000
[Thu Sep 29 20:57:08 2011] Offset between fit and detection position for source 3 = 0.039752 pixels
[Thu Sep 29 20:57:08 2011] 66501.100000 total counts/ 17582.200000 bgd. counts: snr = 368.926690
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.039752 pixels
  Position = (307.4, 320.3) = 14 13 10.95 -65 20 19.8
  Extent = 8.8 (8.7-8.9)", rotation angle = 0
  Source counts = 48918.9 +/- 257.9
  Background counts = 17582.2
  Rate = 0.5 +/- 0.002
[Thu Sep 29 20:57:08 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 20:57:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 20:57:08 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 20:57:08 2011] Source does appear to be extended
[Thu Sep 29 20:57:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 03:03:54 2011] Counts = 48918.900000, rescaling region sizes by 3.000000
[Fri Sep 30 03:03:54 2011] XMMSAS src. selection expression = ellipse(26697.090400, 27815.540600, 1586.910646, 1586.910646, 0.000000, X, Y)
[Fri Sep 30 03:03:54 2011] Writing source region out to fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src3_src.reg
[Fri Sep 30 03:03:54 2011] Extracting stamp from image fullrun_mos1_xmm0111240101_pi300-10000_cl_sm2.00.img.gz, (216, 229) - (399, 411)
[Fri Sep 30 03:03:54 2011] XMMSAS bgd. selection expression = annulus(26697.090400, 27815.540600, 7934.553228, 15869.106457, X, Y) && !ellipse(30641.737000, 23921.621600, 433.661612, 433.661612, 0.000000, X, Y) && !ellipse(28830.675812, 24680.955292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24528.989400, 30457.530200, 423.868012, 423.868012, 0.000000, X, Y) && !ellipse(33123.868805, 20988.793228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27879.286484, 21255.928200, 340.468010, 340.468010, 0.000000, X, Y) && !ellipse(24551.346400, 23741.508200, 300.711209, 300.711209, 0.000000, X, Y) && !ellipse(24053.837460, 19957.300000, 414.995212, 414.995212, 0.000000, X, Y) && !ellipse(23920.568176, 30620.083252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30688.435000, 33768.723600, 757.427222, 398.358411, 318.087798, X, Y) && !ellipse(23330.106394, 22264.619982, 483.962752, 242.302481, 34.823013, X, Y) && !ellipse(16733.345840, 32552.392200, 431.392012, 431.392012, 0.000000, X, Y) && !ellipse(23563.059200, 34903.026200, 806.728023, 398.185611, 329.763044, X, Y) && !ellipse(20925.250260, 25656.715200, 450.893613, 450.893613, 0.000000, X, Y) && !ellipse(38689.035889, 21895.614502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16319.576856, 35179.660865, 671.297576, 438.313733, 100.481672, X, Y) && !ellipse(17497.594315, 27561.223999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41519.663838, 24486.238332, 642.425357, 300.712160, 98.814339, X, Y) && !ellipse(27062.071000, 39109.466000, 525.999215, 525.999215, 0.000000, X, Y) && !ellipse(24656.330880, 24500.314000, 427.894412, 427.894412, 0.000000, X, Y) && !ellipse(26778.197200, 25570.425600, 384.316811, 384.316811, 0.000000, X, Y) && !ellipse(32750.067230, 12501.427887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26778.156665, 29954.954785, 377.526745, 292.549290, 67.797781, X, Y) && !ellipse(16421.021088, 15540.420883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38323.321533, 28933.940521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32711.672852, 31977.424500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28838.314331, 37484.650879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26572.542460, 21297.714000, 489.283214, 489.283214, 0.000000, X, Y) && !ellipse(27637.923000, 34077.513400, 319.616445, 319.616445, 0.000000, X, Y) && !ellipse(25482.136932, 17155.303955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32405.587799, 34893.814880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15406.142776, 18379.414505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25360.353394, 26592.401154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16365.600006, 23691.367462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22543.709808, 13392.123840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22678.433960, 14762.959274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43044.592865, 26772.805084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24484.499054, 26007.484924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10870.000000, 20662.811386, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25746.986725, 18420.960403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19291.592300, 36509.145325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30516.861023, 41325.169342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35006.358917, 14742.187653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15633.303101, 37488.344025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16204.470261, 22151.535431, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 30 03:03:54 2011] Writing fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src3.gif
[Fri Sep 30 03:04:12 2011] Mean detx,y = (222.43, -182.82) 
[Fri Sep 30 03:04:15 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 03:09:52 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 03:09:52 2011] Setting source spectrum file to fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Sep 30 03:09:52 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Fri Sep 30 06:58:39 2011] Updating aperture counts using extracted products
[Fri Sep 30 06:58:39 2011] Error reading totcts from fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Fri Sep 30 06:58:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 06:58:40 2011] Using photon index=1.80, rate=0.473, arf fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src3.arf
[Fri Sep 30 06:58:40 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 06:58:40 2011] Updating source flux to 5e-12
[Fri Sep 30 07:01:16 2011] Reading fit data from xmm0111240101/analysis//spectral/fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src3_pl.csv
[Fri Sep 30 07:01:16 2011] Spectral fit parameter nH value = 3.20294e+21
[Fri Sep 30 07:01:16 2011] Spectral fit parameter PhoIndex value = 0.884268
[Fri Sep 30 07:01:16 2011] Failed to get F(0.3-8.0) from xmm0111240101/analysis//spectral/fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 07:01:16 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 07:01:16 2011] Using Nh = 3.2e+21, photon index=0.88, rate=0.473, arf fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src3.arf
[Fri Sep 30 07:01:16 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 07:01:16 2011] Updating source flux to 8.7e-12