[Thu Sep 29 10:50:43 2011] Detection parameters:
  Position = (318.4, 392.3) = 14 13 3.38 -65 15 6.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 110.0 +/- 15.2
  Background counts = 47.4
  Rate = 0.001 +/- 0.0002

[Thu Sep 29 10:50:44 2011] Off-axis axis estimate = 6.96'
[Thu Sep 29 13:53:19 2011] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 13:53:19 2011] Initial guess for spatial extent in simple fitting = 9.91"
[Thu Sep 29 13:53:19 2011] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.810
[Thu Sep 29 13:53:19 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 9.91"
[Thu Sep 29 15:01:53 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src28.ximg exists
[Thu Sep 29 15:01:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src28.csv
[Thu Sep 29 15:01:53 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src28_1.ximg exists
[Thu Sep 29 15:01:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src28.csv
[Thu Sep 29 15:01:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 15:01:53 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Thu Sep 29 15:01:53 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Thu Sep 29 15:01:53 2011] Fit fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Thu Sep 29 16:45:19 2011] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 19 at 13.628993 pixels away
[Thu Sep 29 16:45:19 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 16:45:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 16:45:19 2011] Assessing source extent using major
[Thu Sep 29 16:45:19 2011] Source does appear to be extended
[Thu Sep 29 16:45:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 18:51:25 2011] Using EEF radius (= 9.91 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 18:51:25 2011] Initial guess for spatial extent in simple fitting = 9.91"
[Thu Sep 29 18:51:25 2011] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.810
[Thu Sep 29 18:51:25 2011] Giving source the simple spatial ID 27 for pass 1, mean size = 9.91"
[Thu Sep 29 19:34:15 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src27.ximg exists
[Thu Sep 29 19:34:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src27.csv
[Thu Sep 29 19:34:15 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src27_1.ximg exists
[Thu Sep 29 19:34:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src27.csv
[Thu Sep 29 19:34:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 19:34:16 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Thu Sep 29 19:34:16 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Thu Sep 29 19:34:16 2011] Fit fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Thu Sep 29 20:57:08 2011] Spatial fit model total counts = 457.205000, observed total counts = 458.000000
[Thu Sep 29 20:57:08 2011] Offset between fit and detection position for source 19 = 0.156057 pixels
[Thu Sep 29 20:57:08 2011] 452.671200 total counts/ 380.148000 bgd. counts: snr = 3.719637
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 0.156057 pixels
  Position = (318.2, 392.3) = 14 13 3.48 -65 15 6.7
  Extent = 4.0 (3.1-5.5)", rotation angle = 0
  Source counts = 72.5 +/- 21.3
  Background counts = 380.1
  Rate = 0.0007 +/- 0.0002
[Thu Sep 29 20:57:08 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 20:57:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 20:57:08 2011] Assessing source extent using major axis lower bound
[Thu Sep 29 20:57:08 2011] Source does appear to be extended
[Thu Sep 29 20:57:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 03:03:55 2011] XMMSAS src. selection expression = ellipse(27637.923000, 34077.513400, 239.712334, 239.712334, 0.000000, X, Y)
[Fri Sep 30 03:03:55 2011] Writing source region out to fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src19_src.reg
[Fri Sep 30 03:03:55 2011] Extracting stamp from image fullrun_mos1_xmm0111240101_pi300-10000_cl_sm2.00.img.gz, (304, 378) - (332, 406)
[Fri Sep 30 03:03:55 2011] XMMSAS bgd. selection expression = annulus(27637.923000, 34077.513400, 399.520556, 799.041113, X, Y)
[Fri Sep 30 03:03:55 2011] Writing fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src19.gif
[Fri Sep 30 03:22:35 2011] Mean detx,y = (6169.51, 2103.46) 
[Fri Sep 30 03:22:36 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 03:22:52 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 03:22:52 2011] Setting source spectrum file to fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Sep 30 03:22:52 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Fri Sep 30 04:37:27 2011] Not generating rmf since there are only 72 counts
[Fri Sep 30 04:37:27 2011] rmf not generated due to insufficient counts
[Fri Sep 30 06:58:40 2011] Updating aperture counts using extracted products
[Fri Sep 30 06:58:40 2011] Error reading totcts from fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src19_src_b10.pi.gz
[Fri Sep 30 06:58:41 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 06:58:41 2011] Using photon index=1.80, rate=0.000701, arf fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src19.arf
[Fri Sep 30 06:58:41 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 06:58:41 2011] Updating source flux to 1.4e-14
[Fri Sep 30 06:58:45 2011] Source 19 has fewer than 100.000000 counts, skipping spectral fitting