[Thu Sep 29 10:50:42 2011] Detection parameters:
  Position = (331.9, 284.2) = 14 12 53.86 -65 22 56.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2453.9 +/- 61.4
  Background counts = 54.1
  Rate = 0.03 +/- 0.0007

[Thu Sep 29 10:50:44 2011] Off-axis axis estimate = 2.64'
[Thu Sep 29 13:53:19 2011] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 13:53:19 2011] Initial guess for spatial extent in simple fitting = 7.75"
[Thu Sep 29 13:53:19 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.961
[Thu Sep 29 13:53:19 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.75"
[Thu Sep 29 15:01:52 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src3.ximg exists
[Thu Sep 29 15:01:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src3.csv
[Thu Sep 29 15:01:52 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src3_1.ximg exists
[Thu Sep 29 15:01:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src3.csv
[Thu Sep 29 15:01:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Sep 29 15:01:53 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Thu Sep 29 15:01:53 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Thu Sep 29 15:01:53 2011] Fit fullrun_mos1_xmm0111240101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Thu Sep 29 16:45:19 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.658614 pixels away
[Thu Sep 29 16:45:19 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 16:45:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 16:45:19 2011] Assessing source extent using major
[Thu Sep 29 16:45:19 2011] Source does appear to be extended
[Thu Sep 29 16:45:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Sep 29 18:51:25 2011] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Thu Sep 29 18:51:25 2011] Initial guess for spatial extent in simple fitting = 7.75"
[Thu Sep 29 18:51:25 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.961
[Thu Sep 29 18:51:25 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.75"
[Thu Sep 29 19:34:15 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src3.ximg exists
[Thu Sep 29 19:34:15 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Sep 29 19:34:15 2011] Fit fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_src3 appears to have run properly
[Thu Sep 29 19:34:16 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Sep 29 19:34:16 2011] fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Sep 29 19:34:16 2011] Fit fullrun_mos1_xmm0111240101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Thu Sep 29 20:57:08 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.658614 pixels away
[Thu Sep 29 20:57:08 2011] Vigneting correction estimate = 1.000000
[Thu Sep 29 20:57:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Sep 29 20:57:08 2011] Assessing source extent using major
[Thu Sep 29 20:57:08 2011] Source does appear to be extended
[Thu Sep 29 20:57:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 03:03:54 2011] Counts = 2453.902344, rescaling region sizes by 2.000000
[Fri Sep 30 03:03:54 2011] XMMSAS src. selection expression = ellipse(28830.675812, 24680.955292, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Sep 30 03:03:54 2011] Writing source region out to fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src1_src.reg
[Fri Sep 30 03:03:54 2011] Extracting stamp from image fullrun_mos1_xmm0111240101_pi300-10000_cl_sm2.00.img.gz, (257, 209) - (407, 359)
[Fri Sep 30 03:03:54 2011] XMMSAS bgd. selection expression = annulus(28830.675812, 24680.955292, 4350.000000, 8700.000000, X, Y) && !ellipse(26697.090400, 27815.540600, 2115.880861, 2115.880861, 0.000000, X, Y) && !ellipse(30641.737000, 23921.621600, 433.661612, 433.661612, 0.000000, X, Y) && !ellipse(24528.989400, 30457.530200, 423.868012, 423.868012, 0.000000, X, Y) && !ellipse(33123.868805, 20988.793228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27879.286484, 21255.928200, 340.468010, 340.468010, 0.000000, X, Y) && !ellipse(24551.346400, 23741.508200, 300.711209, 300.711209, 0.000000, X, Y) && !ellipse(24053.837460, 19957.300000, 414.995212, 414.995212, 0.000000, X, Y) && !ellipse(23920.568176, 30620.083252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30688.435000, 33768.723600, 757.427222, 398.358411, 318.087798, X, Y) && !ellipse(23330.106394, 22264.619982, 483.962752, 242.302481, 34.823013, X, Y) && !ellipse(20925.250260, 25656.715200, 450.893613, 450.893613, 0.000000, X, Y) && !ellipse(24656.330880, 24500.314000, 427.894412, 427.894412, 0.000000, X, Y) && !ellipse(26778.197200, 25570.425600, 384.316811, 384.316811, 0.000000, X, Y) && !ellipse(26778.156665, 29954.954785, 377.526745, 292.549290, 67.797781, X, Y) && !ellipse(38323.321533, 28933.940521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32711.672852, 31977.424500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26572.542460, 21297.714000, 489.283214, 489.283214, 0.000000, X, Y) && !ellipse(25482.136932, 17155.303955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25360.353394, 26592.401154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24484.499054, 26007.484924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25746.986725, 18420.960403, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Sep 30 03:03:54 2011] Writing fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src1.gif
[Fri Sep 30 03:11:13 2011] Mean detx,y = (-3240.23, 1243.39) 
[Fri Sep 30 03:11:15 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 03:13:56 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 03:13:57 2011] Setting source spectrum file to fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 03:13:57 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Sep 30 03:48:05 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Sep 30 03:48:05 2011] rmf not generated due to insufficient counts
[Fri Sep 30 06:58:39 2011] Updating aperture counts using extracted products
[Fri Sep 30 06:58:39 2011] Error reading totcts from fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 06:58:40 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 06:58:40 2011] Using photon index=1.80, rate=0.0262, arf fullrun_mos1_xmm0111240101_pi300-10000_pass1_cl_src1.arf
[Fri Sep 30 06:58:40 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 06:58:40 2011] Updating source flux to 3e-13
[Fri Sep 30 06:58:45 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting