[Mon Jul 23 06:02:46 2012] Detection parameters:
  Position = (283.9, 280.0) = 18 25 46.67 -37 6 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 775039.1 +/- 1004.9
  Background counts = 237.0
  Rate = 2e+01 +/- 0.02

[Mon Jul 23 06:02:46 2012] Off-axis axis estimate = 1.70'
[Mon Jul 23 06:09:35 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Mon Jul 23 06:09:35 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Mon Jul 23 06:09:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Mon Jul 23 06:09:35 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Mon Jul 23 07:56:58 2012] fullrun_mos2_xmm0111230101_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul 23 07:56:58 2012] fullrun_mos2_xmm0111230101_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul 23 07:56:58 2012] Fit fullrun_mos2_xmm0111230101_pi300-10000_cl_pass0_src1 appears to have run properly
[Mon Jul 23 07:56:58 2012] fullrun_mos2_xmm0111230101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul 23 07:56:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111230101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul 23 07:56:58 2012] fullrun_mos2_xmm0111230101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul 23 07:56:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111230101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon Jul 23 07:56:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111230101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111230101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 07:57:01 2012] Spatial fit model total counts = 579407.000000, observed total counts = 590495.000000
[Mon Jul 23 07:57:01 2012] Offset between fit and detection position for source 5 = 0.067897 pixels
[Mon Jul 23 07:57:01 2012] 559639.000000 total counts/ 25600.000000 bgd. counts: snr = 3337.743750
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.067897 pixels
  Position = (283.9, 280.0) = 18 25 46.67 -37 6 17.4
  Extent = 7.9 (7.9-7.9)" x 7.3 (7.3-7.3)", rotation angle = 0
  Source counts = 534039.0 +/- 748.1
  Background counts = 25600.0
  Rate = 1e+01 +/- 0.02
[Mon Jul 23 07:57:01 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 07:57:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 07:57:01 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 07:57:01 2012] Source does appear to be extended
[Mon Jul 23 07:57:01 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.09
[Mon Jul 23 08:02:10 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul 23 08:02:10 2012] Initial guess for spatial extent in simple fitting = 7.60"
[Mon Jul 23 08:02:10 2012] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.793
[Mon Jul 23 08:02:10 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.60"
[Mon Jul 23 08:48:51 2012] fullrun_mos2_xmm0111230101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul 23 08:48:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111230101_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 08:48:51 2012] fullrun_mos2_xmm0111230101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul 23 08:48:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111230101_pi300-10000_cl_pass1_src1.csv
[Mon Jul 23 08:48:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111230101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111230101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 08:48:51 2012] fullrun_mos2_xmm0111230101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul 23 08:48:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111230101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jul 23 08:48:51 2012] fullrun_mos2_xmm0111230101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul 23 08:48:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111230101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon Jul 23 08:48:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111230101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111230101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul 23 08:48:53 2012] Warning, spatial fit 1 centroid is now closest to src. 4
[Mon Jul 23 08:48:53 2012] Vigneting correction estimate = 1.000000
[Mon Jul 23 08:48:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul 23 08:48:53 2012] Assessing source extent using major axis lower bound
[Mon Jul 23 08:48:53 2012] Source does appear to be extended
[Mon Jul 23 08:48:53 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.09
[Mon Jul 23 08:51:16 2012] Counts = 534039.000000, rescaling region sizes by 3.000000
[Mon Jul 23 08:51:16 2012] XMMSAS src. selection expression = ellipse(24652.386320, 24314.905000, 1424.154641, 1310.369438, 0.000000, X, Y)
[Mon Jul 23 08:51:16 2012] Writing source region out to fullrun_mos2_xmm0111230101_pi300-10000_pass1_cl_src5_src.reg
[Mon Jul 23 08:51:16 2012] Extracting stamp from image fullrun_mos2_xmm0111230101_pi300-10000_cl_sm2.00.img.gz, (202, 198) - (366, 362)
[Mon Jul 23 08:51:16 2012] XMMSAS bgd. selection expression = annulus(24652.386320, 24314.905000, 7120.773205, 14241.546410, X, Y) && !ellipse(23716.701752, 24652.469482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23778.948914, 23971.050903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21018.455215, 34340.304993, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jul 23 08:51:16 2012] Writing fullrun_mos2_xmm0111230101_pi300-10000_pass1_cl_src5.gif
[Mon Jul 23 08:52:00 2012] Mean detx,y = (87.40, 81.71) 
[Mon Jul 23 08:52:05 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul 23 08:56:16 2012] Binned source spectrum to 10 counts/bin
[Mon Jul 23 08:56:16 2012] Setting source spectrum file to fullrun_mos2_xmm0111230101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jul 23 08:56:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111230101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Jul 23 09:53:23 2012] Updating aperture counts using extracted products
[Mon Jul 23 09:53:23 2012] Error reading totcts from fullrun_mos2_xmm0111230101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jul 23 09:53:23 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 09:53:23 2012] Using photon index=1.80, rate=12.5, arf fullrun_mos2_xmm0111230101_pi300-10000_pass1_cl_src5.arf
[Mon Jul 23 09:53:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 09:53:23 2012] Updating source flux to 1.3e-10
[Mon Jul 23 09:53:42 2012] Reading fit data from xmm0111230101/analysis//spectral/fullrun_mos2_xmm0111230101_pi300-10000_pass1_cl_src5_pl.csv
[Mon Jul 23 09:53:42 2012] Spectral fit parameter nH value = 6.24877e+14
[Mon Jul 23 09:53:42 2012] Spectral fit parameter PhoIndex value = 0.408338
[Mon Jul 23 09:53:42 2012] Failed to get F(0.3-8.0) from xmm0111230101/analysis//spectral/fullrun_mos2_xmm0111230101_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Mon Jul 23 09:53:42 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul 23 09:53:42 2012] Using Nh = 6.2e+14, photon index=0.41, rate=12.5, arf fullrun_mos2_xmm0111230101_pi300-10000_pass1_cl_src5.arf
[Mon Jul 23 09:53:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul 23 09:53:42 2012] Updating source flux to 2.7e-10