[Fri Sep 30 10:47:32 2011] Detection parameters:
  Position = (276.4, 286.9) = 6 15 36.54 71 2 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46181.9 +/- 255.6
  Background counts = 168.9
  Rate = 0.9 +/- 0.005

[Fri Sep 30 10:47:33 2011] Off-axis axis estimate = 1.80'
[Fri Sep 30 10:52:13 2011] Using EEF radius (= 7.33 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 10:52:13 2011] Initial guess for spatial extent in simple fitting = 7.33"
[Fri Sep 30 10:52:13 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.047
[Fri Sep 30 10:52:13 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.33"
[Fri Sep 30 12:12:07 2011] fullrun_pn_xmm0111220201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Sep 30 12:12:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111220201_pi300-10000_cl_pass0_src1.csv
[Fri Sep 30 12:12:07 2011] fullrun_pn_xmm0111220201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Sep 30 12:12:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111220201_pi300-10000_cl_pass0_src1.csv
[Fri Sep 30 12:12:07 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111220201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111220201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 12:12:08 2011] fullrun_pn_xmm0111220201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Sep 30 12:12:08 2011] fullrun_pn_xmm0111220201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Sep 30 12:12:08 2011] Fit fullrun_pn_xmm0111220201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Sep 30 14:50:47 2011] Spatial fit model total counts = 32077.200000, observed total counts = 32089.000000
[Fri Sep 30 14:50:47 2011] Offset between fit and detection position for source 1 = 0.052812 pixels
[Fri Sep 30 14:50:47 2011] 32114.080000 total counts/ 6479.880000 bgd. counts: snr = 318.446358
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.052812 pixels
  Position = (276.4, 286.9) = 6 15 36.55 71 2 15.6
  Extent = 6.1 (6.0-6.1)", rotation angle = 0
  Source counts = 25634.2 +/- 179.2
  Background counts = 6479.9
  Rate = 0.6 +/- 0.004
[Fri Sep 30 14:50:47 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 14:50:47 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 14:50:47 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 14:50:47 2011] Source does appear to be extended
[Fri Sep 30 14:50:47 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 14:51:07 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 14:51:07 2011] Initial guess for spatial extent in simple fitting = 6.09"
[Fri Sep 30 14:51:07 2011] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.832
[Fri Sep 30 14:51:07 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.09"
[Fri Sep 30 16:07:30 2011] fullrun_pn_xmm0111220201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Sep 30 16:07:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111220201_pi300-10000_cl_pass1_src1.csv
[Fri Sep 30 16:07:30 2011] fullrun_pn_xmm0111220201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Sep 30 16:07:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111220201_pi300-10000_cl_pass1_src1.csv
[Fri Sep 30 16:07:30 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111220201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111220201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 16:07:31 2011] fullrun_pn_xmm0111220201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Sep 30 16:07:31 2011] fullrun_pn_xmm0111220201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Sep 30 16:07:31 2011] Fit fullrun_pn_xmm0111220201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Sep 30 18:16:08 2011] Spatial fit model total counts = 32056.400000, observed total counts = 32089.000000
[Fri Sep 30 18:16:08 2011] Offset between fit and detection position for source 1 = 0.000100 pixels
[Fri Sep 30 18:16:08 2011] 32094.520000 total counts/ 6486.620000 bgd. counts: snr = 317.954325
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000100 pixels
  Position = (276.4, 286.9) = 6 15 36.55 71 2 15.6
  Extent = 6.1 (6.0-6.1)", rotation angle = 0
  Source counts = 25607.9 +/- 179.1
  Background counts = 6486.6
  Rate = 0.6 +/- 0.004
[Fri Sep 30 18:16:08 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 18:16:08 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 18:16:08 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 18:16:08 2011] Source does appear to be extended
[Fri Sep 30 18:16:08 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 18:16:27 2011] Counts = 25607.900000, rescaling region sizes by 3.000000
[Fri Sep 30 18:16:27 2011] XMMSAS src. selection expression = ellipse(23998.980000, 24909.454800, 1095.276632, 1095.276632, 0.000000, X, Y)
[Fri Sep 30 18:16:27 2011] Writing source region out to fullrun_pn_xmm0111220201_pi300-10000_pass1_cl_src1_src.reg
[Fri Sep 30 18:16:27 2011] Extracting stamp from image fullrun_pn_xmm0111220201_pi300-10000_cl_sm2.00.img.gz, (213, 224) - (339, 350)
[Fri Sep 30 18:16:27 2011] XMMSAS bgd. selection expression = annulus(23998.980000, 24909.454800, 5476.383158, 10952.766315, X, Y) && !ellipse(35000.401031, 31179.845734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13107.638779, 29450.874725, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34732.752838, 26749.393036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26077.931000, 24672.495600, 442.277613, 442.277613, 0.000000, X, Y) && !ellipse(20968.758377, 30147.934082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28272.547800, 28297.802600, 468.091213, 468.091213, 0.000000, X, Y) && !ellipse(12822.183304, 22145.135483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20044.358154, 17490.822662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26765.009800, 30622.848800, 365.129611, 365.129611, 0.000000, X, Y) && !ellipse(24626.644012, 24252.210541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33855.630000, 32650.168000, 1731.792050, 1731.792050, 0.000000, X, Y) && !ellipse(33751.079600, 25840.640600, 303.716009, 303.716009, 0.000000, X, Y) && !ellipse(32193.169525, 14952.517746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30443.696381, 35110.271454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27502.664673, 35756.688782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.772000, 35305.100000, 970.152028, 970.152028, 0.000000, X, Y) && !ellipse(26850.464691, 33808.932739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27956.567800, 32705.609200, 428.816812, 428.816812, 0.000000, X, Y) && !ellipse(13771.625587, 32147.985014, 757.602350, 265.831357, 317.643814, X, Y) && !ellipse(26183.203200, 31830.839400, 1164.744034, 236.052007, 283.905000, X, Y) && !ellipse(26095.300018, 31367.707642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25776.913600, 30436.757200, 838.760024, 838.760024, 0.000000, X, Y) && !ellipse(13836.105800, 30389.964400, 617.496018, 617.496018, 0.000000, X, Y) && !ellipse(18378.330000, 28403.784800, 1576.144045, 1576.144045, 0.000000, X, Y) && !ellipse(18803.537358, 28385.560448, 350.695285, 230.023695, 0.000000, X, Y) && !ellipse(12745.148400, 27914.785200, 1047.720030, 1047.720030, 0.000000, X, Y) && !ellipse(24841.837800, 27666.314000, 1143.696033, 1143.696033, 0.000000, X, Y) && !ellipse(20045.741400, 25600.620000, 412.192012, 412.192012, 0.000000, X, Y) && !ellipse(18766.454400, 24482.413400, 364.401610, 364.401610, 0.000000, X, Y)
[Fri Sep 30 18:16:27 2011] Writing fullrun_pn_xmm0111220201_pi300-10000_pass1_cl_src1.gif
[Fri Sep 30 18:16:54 2011] Mean detx,y = (462.10, -57.87) 
[Fri Sep 30 18:17:00 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 18:20:10 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 18:20:10 2011] Setting source spectrum file to fullrun_pn_xmm0111220201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 18:20:10 2011] Setting bgd. spectrum file to fullrun_pn_xmm0111220201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Sep 30 20:43:43 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:43:43 2011] Error reading totcts from fullrun_pn_xmm0111220201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Sep 30 20:43:44 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:43:44 2011] Using photon index=1.80, rate=0.605, arf fullrun_pn_xmm0111220201_pi300-10000_pass1_cl_src1.arf
[Fri Sep 30 20:43:44 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 20:43:44 2011] Updating source flux to 1.4e-12
[Fri Sep 30 20:46:59 2011] Reading fit data from xmm0111220201/analysis//spectral/fullrun_pn_xmm0111220201_pi300-10000_pass1_cl_src1_pl.csv
[Fri Sep 30 20:46:59 2011] Spectral fit parameter nH value = 1.15018e+13
[Fri Sep 30 20:46:59 2011] Spectral fit parameter PhoIndex value = 1.11493
[Fri Sep 30 20:46:59 2011] Failed to get F(0.3-8.0) from xmm0111220201/analysis//spectral/fullrun_pn_xmm0111220201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Sep 30 20:46:59 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:46:59 2011] Using Nh = 1.2e+13, photon index=1.11, rate=0.605, arf fullrun_pn_xmm0111220201_pi300-10000_pass1_cl_src1.arf
[Fri Sep 30 20:46:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 20:46:59 2011] Updating source flux to 2.3e-12