[Fri Sep 30 10:48:38 2011] Detection parameters:
  Position = (230.8, 295.0) = 6 16 17.29 71 2 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.6 +/- 14.3
  Background counts = 36.0
  Rate = 0.002 +/- 0.0003

[Fri Sep 30 10:48:38 2011] Off-axis axis estimate = 4.91'
[Fri Sep 30 13:10:22 2011] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Fri Sep 30 13:10:22 2011] Initial guess for spatial extent in simple fitting = 8.88"
[Fri Sep 30 13:10:22 2011] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.160
[Fri Sep 30 13:10:22 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 8.88"
[Fri Sep 30 14:50:38 2011] fullrun_mos2_xmm0111220201_pi300-10000_cl_pass0_src17.ximg exists
[Fri Sep 30 14:50:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111220201_pi300-10000_cl_pass0_src17.csv
[Fri Sep 30 14:50:38 2011] fullrun_mos2_xmm0111220201_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Sep 30 14:50:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111220201_pi300-10000_cl_pass0_src17.csv
[Fri Sep 30 14:50:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111220201_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111220201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 14:50:38 2011] fullrun_mos2_xmm0111220201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Sep 30 14:50:38 2011] fullrun_mos2_xmm0111220201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Sep 30 14:50:38 2011] Fit fullrun_mos2_xmm0111220201_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Sep 30 14:50:56 2011] Source 20 is offset by 6.086795 and 3.313846 pixels which is larger than
2 X fitted extent = 1.088207 x 1.088207, not incorporating fit results
[Fri Sep 30 14:50:56 2011] Spatial fit model total counts = 317.790000, observed total counts = 318.000000
[Fri Sep 30 14:50:56 2011] Offset between fit and detection position for source 20 = 0.211866 pixels
[Fri Sep 30 14:50:56 2011] 317.757200 total counts/ 257.938000 bgd. counts: snr = 3.724628
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.211866 pixels
  Position = (230.6, 294.9) = 6 16 17.44 71 2 49.9
  Extent = 4.6 (3.8-6.1)", rotation angle = 0
  Source counts = 59.8 +/- 17.8
  Background counts = 257.9
  Rate = 0.001 +/- 0.0003
[Fri Sep 30 14:50:56 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 14:50:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 14:50:56 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 14:50:56 2011] Source does appear to be extended
[Fri Sep 30 14:50:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 16:45:55 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Sep 30 16:45:55 2011] Initial guess for spatial extent in simple fitting = 4.55"
[Fri Sep 30 16:45:55 2011] source mask rpix=1.0, npix_max = 9, mask sum = 9, frac = 0.941
[Fri Sep 30 16:45:55 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 4.55"
[Fri Sep 30 18:16:00 2011] fullrun_mos2_xmm0111220201_pi300-10000_cl_pass1_src17.ximg exists
[Fri Sep 30 18:16:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111220201_pi300-10000_cl_pass1_src17.csv
[Fri Sep 30 18:16:00 2011] fullrun_mos2_xmm0111220201_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Sep 30 18:16:00 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111220201_pi300-10000_cl_pass1_src17.csv
[Fri Sep 30 18:16:00 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111220201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111220201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Sep 30 18:16:00 2011] fullrun_mos2_xmm0111220201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Sep 30 18:16:00 2011] fullrun_mos2_xmm0111220201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Sep 30 18:16:00 2011] Fit fullrun_mos2_xmm0111220201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Sep 30 18:16:17 2011] Spatial fit model total counts = 315.994000, observed total counts = 318.000000
[Fri Sep 30 18:16:17 2011] Offset between fit and detection position for source 20 = 0.026027 pixels
[Fri Sep 30 18:16:17 2011] 316.054400 total counts/ 258.508000 bgd. counts: snr = 3.579160
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.026027 pixels
  Position = (230.6, 294.9) = 6 16 17.45 71 2 50.0
  Extent = 4.8 (3.9-6.2)", rotation angle = 0
  Source counts = 57.5 +/- 17.8
  Background counts = 258.5
  Rate = 0.001 +/- 0.0003
[Fri Sep 30 18:16:17 2011] Vigneting correction estimate = 1.000000
[Fri Sep 30 18:16:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Sep 30 18:16:17 2011] Assessing source extent using major axis lower bound
[Fri Sep 30 18:16:17 2011] Source does appear to be extended
[Fri Sep 30 18:16:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Sep 30 20:15:19 2011] XMMSAS src. selection expression = ellipse(20014.741800, 25608.423000, 285.800408, 285.800408, 0.000000, X, Y)
[Fri Sep 30 20:15:19 2011] Writing source region out to fullrun_mos2_xmm0111220201_pi300-10000_pass1_cl_src20_src.reg
[Fri Sep 30 20:15:19 2011] Extracting stamp from image fullrun_mos2_xmm0111220201_pi300-10000_cl_sm2.00.img.gz, (214, 278) - (247, 311)
[Fri Sep 30 20:15:19 2011] XMMSAS bgd. selection expression = annulus(20014.741800, 25608.423000, 476.334014, 952.668027, X, Y) && !ellipse(18763.155040, 24475.358600, 339.484010, 339.484010, 0.000000, X, Y)
[Fri Sep 30 20:15:19 2011] Writing fullrun_mos2_xmm0111220201_pi300-10000_pass1_cl_src20.gif
[Fri Sep 30 20:21:09 2011] Mean detx,y = (-4330.22, 486.30) 
[Fri Sep 30 20:21:10 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Sep 30 20:21:16 2011] Binned source spectrum to 10 counts/bin
[Fri Sep 30 20:21:16 2011] Setting source spectrum file to fullrun_mos2_xmm0111220201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Sep 30 20:21:16 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0111220201_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Fri Sep 30 20:41:37 2011] Not generating rmf since there are only 57 counts
[Fri Sep 30 20:41:37 2011] rmf not generated due to insufficient counts
[Fri Sep 30 20:43:46 2011] Updating aperture counts using extracted products
[Fri Sep 30 20:43:46 2011] Error reading totcts from fullrun_mos2_xmm0111220201_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Fri Sep 30 20:43:46 2011] Calculating source flux in energy range 0.30-8.00
[Fri Sep 30 20:43:46 2011] Using photon index=1.80, rate=0.00103, arf fullrun_mos2_xmm0111220201_pi300-10000_pass1_cl_src20.arf
[Fri Sep 30 20:43:46 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Sep 30 20:43:46 2011] Updating source flux to 1.5e-14
[Fri Sep 30 20:44:50 2011] Flag b found in src. 20 procflags, skipping spectral fitting
[Fri Sep 30 20:44:50 2011] Source 20 has fewer than 100.000000 counts, skipping spectral fitting