[Tue Sep 27 20:03:55 2011] Detection parameters:
  Position = (403.1, 358.9) = 6 13 43.08 71 7 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3053.4 +/- 65.1
  Background counts = 16.8
  Rate = 0.07 +/- 0.002

[Tue Sep 27 20:03:55 2011] Off-axis axis estimate = 8.76'
[Tue Sep 27 20:19:38 2011] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 20:19:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 20:19:38 2011] Initial guess for spatial extent in simple fitting = 10.81"
[Tue Sep 27 20:19:38 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.010
[Tue Sep 27 20:19:38 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 10.81"
[Tue Sep 27 21:05:02 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src2.ximg exists
[Tue Sep 27 21:05:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src2.csv
[Tue Sep 27 21:05:02 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src2_1.ximg exists
[Tue Sep 27 21:05:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src2.csv
[Tue Sep 27 21:05:02 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 21:05:03 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Tue Sep 27 21:05:03 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Tue Sep 27 21:05:03 2011] Fit fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Tue Sep 27 21:30:53 2011] Warning, spatial fit 2 centroid is now closest to src. 19
[Tue Sep 27 21:30:53 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 21:30:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 21:30:53 2011] Assessing source extent using major
[Tue Sep 27 21:30:53 2011] Source does appear to be extended
[Tue Sep 27 21:30:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 21:38:10 2011] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 21:38:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 21:38:10 2011] Initial guess for spatial extent in simple fitting = 10.81"
[Tue Sep 27 21:38:10 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.010
[Tue Sep 27 21:38:10 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 10.81"
[Tue Sep 27 22:02:58 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_src2.ximg exists
[Tue Sep 27 22:02:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_src2.csv
[Tue Sep 27 22:02:58 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_src2_1.ximg exists
[Tue Sep 27 22:02:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_src2.csv
[Tue Sep 27 22:02:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 22:02:58 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Tue Sep 27 22:02:58 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Tue Sep 27 22:02:58 2011] Fit fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Tue Sep 27 22:47:55 2011] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.378546 pixels away
[Tue Sep 27 22:47:56 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 22:47:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 22:47:56 2011] Assessing source extent using major
[Tue Sep 27 22:47:56 2011] Source does appear to be extended
[Tue Sep 27 22:47:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 23:00:26 2011] Counts = 3053.402100, rescaling region sizes by 2.000000
[Tue Sep 27 23:00:26 2011] XMMSAS src. selection expression = ellipse(35023.059052, 31173.752441, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue Sep 27 23:00:26 2011] Writing source region out to fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src6_src.reg
[Tue Sep 27 23:00:26 2011] Extracting stamp from image fullrun_mos1_xmm0111220101_pi300-10000_cl_sm2.00.img.gz, (328, 284) - (478, 434)
[Tue Sep 27 23:00:26 2011] XMMSAS bgd. selection expression = annulus(35023.059052, 31173.752441, 4350.000000, 8700.000000, X, Y) && !ellipse(26086.479400, 24681.329200, 397.687211, 397.687211, 0.000000, X, Y) && !ellipse(28316.271851, 28289.238342, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26789.351600, 30592.338400, 488.232814, 488.232814, 0.000000, X, Y) && !ellipse(26808.000153, 31316.911621, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34780.766388, 26764.141724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37580.825400, 34014.598600, 438.670413, 438.670413, 0.000000, X, Y) && !ellipse(27963.418457, 32665.913422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30461.806335, 35184.126404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40323.517059, 27307.634186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40684.648834, 24937.362091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33087.200195, 35039.714050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35533.998000, 32943.050000, 1772.672051, 1772.672051, 0.000000, X, Y)
[Tue Sep 27 23:00:26 2011] Writing fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src6.gif
[Tue Sep 27 23:00:52 2011] Mean detx,y = (-9169.97, -8416.30) 
[Tue Sep 27 23:00:54 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 23:02:58 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 23:02:58 2011] Setting source spectrum file to fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Sep 27 23:02:58 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Sep 27 23:16:11 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Sep 27 23:16:11 2011] rmf not generated due to insufficient counts
[Tue Sep 27 23:57:37 2011] Updating aperture counts using extracted products
[Tue Sep 27 23:57:37 2011] Error reading totcts from fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue Sep 27 23:57:37 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 23:57:37 2011] Using photon index=1.80, rate=0.0709, arf fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src6.arf
[Tue Sep 27 23:57:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Sep 27 23:57:37 2011] Updating source flux to 1.4e-12
[Tue Sep 27 23:57:39 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting