[Tue Sep 27 20:03:55 2011] Detection parameters:
  Position = (151.4, 338.9) = 6 17 28.52 71 6 0.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.7 +/- 18.1
  Background counts = 19.1
  Rate = 0.009 +/- 0.0008

[Tue Sep 27 20:03:55 2011] Off-axis axis estimate = 11.05'
[Tue Sep 27 20:19:38 2011] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 20:19:38 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 20:19:38 2011] Initial guess for spatial extent in simple fitting = 11.96"
[Tue Sep 27 20:19:38 2011] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.995
[Tue Sep 27 20:19:38 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 11.96"
[Tue Sep 27 21:05:02 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src5.ximg exists
[Tue Sep 27 21:05:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src5.csv
[Tue Sep 27 21:05:02 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Sep 27 21:05:02 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src5.csv
[Tue Sep 27 21:05:02 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 21:05:03 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Sep 27 21:05:03 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Sep 27 21:05:03 2011] Fit fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Sep 27 21:30:53 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.021494 pixels away
[Tue Sep 27 21:30:53 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 21:30:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 21:30:53 2011] Assessing source extent using major
[Tue Sep 27 21:30:53 2011] Source does appear to be extended
[Tue Sep 27 21:30:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 21:38:10 2011] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 21:38:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Sep 27 21:38:10 2011] Initial guess for spatial extent in simple fitting = 11.96"
[Tue Sep 27 21:38:10 2011] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.995
[Tue Sep 27 21:38:10 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 11.96"
[Tue Sep 27 22:02:58 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_src5.ximg exists
[Tue Sep 27 22:02:58 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue Sep 27 22:02:58 2011] Fit fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_src5 appears to have run properly
[Tue Sep 27 22:02:58 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue Sep 27 22:02:58 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue Sep 27 22:02:58 2011] Fit fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Tue Sep 27 22:47:55 2011] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 16.021494 pixels away
[Tue Sep 27 22:47:56 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 22:47:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 22:47:56 2011] Assessing source extent using major
[Tue Sep 27 22:47:56 2011] Source does appear to be extended
[Tue Sep 27 22:47:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 23:00:26 2011] XMMSAS src. selection expression = ellipse(13127.120056, 29435.064026, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep 27 23:00:26 2011] Writing source region out to fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src3_src.reg
[Tue Sep 27 23:00:26 2011] Extracting stamp from image fullrun_mos1_xmm0111220101_pi300-10000_cl_sm2.00.img.gz, (114, 301) - (189, 376)
[Tue Sep 27 23:00:26 2011] XMMSAS bgd. selection expression = annulus(13127.120056, 29435.064026, 1087.500000, 2175.000000, X, Y)
[Tue Sep 27 23:00:26 2011] Writing fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src3.gif
[Tue Sep 27 23:03:26 2011] Mean detx,y = (-856.57, 11881.19) 
[Tue Sep 27 23:03:27 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 23:03:52 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 23:03:52 2011] Setting source spectrum file to fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Sep 27 23:03:52 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Sep 27 23:23:54 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Sep 27 23:23:54 2011] rmf not generated due to insufficient counts
[Tue Sep 27 23:57:37 2011] Updating aperture counts using extracted products
[Tue Sep 27 23:57:37 2011] Error reading totcts from fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Sep 27 23:57:37 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 23:57:37 2011] Using photon index=1.80, rate=0.0089, arf fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src3.arf
[Tue Sep 27 23:57:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Sep 27 23:57:37 2011] Updating source flux to 1.6e-13
[Tue Sep 27 23:57:39 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting