[Tue Sep 27 20:03:55 2011] Detection parameters:
  Position = (274.9, 273.2) = 6 15 37.88 71 1 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.1 +/- 12.0
  Background counts = 21.8
  Rate = 0.001 +/- 0.0003

[Tue Sep 27 20:03:55 2011] Off-axis axis estimate = 2.50'
[Tue Sep 27 20:19:38 2011] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 20:19:38 2011] Initial guess for spatial extent in simple fitting = 7.68"
[Tue Sep 27 20:19:38 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.780
[Tue Sep 27 20:19:38 2011] Giving source the simple spatial ID 20 for pass 0, mean size = 7.68"
[Tue Sep 27 21:05:03 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src20.ximg exists
[Tue Sep 27 21:05:03 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src20.csv
[Tue Sep 27 21:05:03 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src20_1.ximg exists
[Tue Sep 27 21:05:03 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src20.csv
[Tue Sep 27 21:05:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Sep 27 21:05:03 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Tue Sep 27 21:05:03 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Tue Sep 27 21:05:03 2011] Fit fullrun_mos1_xmm0111220101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Tue Sep 27 21:30:53 2011] Source 25 is offset by -1.032204 and -7.831425 pixels which is larger than
2 X fitted extent = 7.060276 x 7.060276, not incorporating fit results
[Tue Sep 27 21:30:53 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 21:30:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 21:30:53 2011] Assessing source extent using major
[Tue Sep 27 21:30:53 2011] Source does appear to be extended
[Tue Sep 27 21:30:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 21:38:10 2011] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Tue Sep 27 21:38:10 2011] Initial guess for spatial extent in simple fitting = 7.68"
[Tue Sep 27 21:38:10 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.780
[Tue Sep 27 21:38:10 2011] Giving source the simple spatial ID 19 for pass 1, mean size = 7.68"
[Tue Sep 27 22:02:58 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_src19.ximg exists
[Tue Sep 27 22:02:58 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_src19_1.ximg exists
[Tue Sep 27 22:02:58 2011] Fit fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_src19 appears to have run properly
[Tue Sep 27 22:02:58 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Tue Sep 27 22:02:58 2011] fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Tue Sep 27 22:02:58 2011] Fit fullrun_mos1_xmm0111220101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Tue Sep 27 22:47:55 2011] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 21.727995 pixels away
[Tue Sep 27 22:47:55 2011] Source 25 is offset by -0.969818 and -7.831425 pixels which is larger than
2 X fitted extent = 7.060276 x 7.060276, not incorporating fit results
[Tue Sep 27 22:47:56 2011] Vigneting correction estimate = 1.000000
[Tue Sep 27 22:47:56 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Sep 27 22:47:56 2011] Assessing source extent using major
[Tue Sep 27 22:47:56 2011] Source does appear to be extended
[Tue Sep 27 22:47:56 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Sep 27 23:00:26 2011] XMMSAS src. selection expression = ellipse(23870.279266, 23722.410065, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Sep 27 23:00:26 2011] Writing source region out to fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src25_src.reg
[Tue Sep 27 23:00:26 2011] Extracting stamp from image fullrun_mos1_xmm0111220101_pi300-10000_cl_sm2.00.img.gz, (237, 236) - (312, 311)
[Tue Sep 27 23:00:26 2011] XMMSAS bgd. selection expression = annulus(23870.279266, 23722.410065, 1087.500000, 2175.000000, X, Y) && !ellipse(24022.237400, 24901.090900, 449.760013, 449.760013, 0.000000, X, Y) && !ellipse(26086.479400, 24681.329200, 397.687211, 397.687211, 0.000000, X, Y)
[Tue Sep 27 23:00:26 2011] Writing fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src25.gif
[Tue Sep 27 23:08:15 2011] Mean detx,y = (1133.78, -67.67) 
[Tue Sep 27 23:08:15 2011] Setting backscal keywords in source and bgd. spectrum
[Tue Sep 27 23:08:26 2011] Binned source spectrum to 10 counts/bin
[Tue Sep 27 23:08:26 2011] Setting source spectrum file to fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Sep 27 23:08:26 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Sep 27 23:24:31 2011] Not generating rmf since there are only 50 counts
[Tue Sep 27 23:24:31 2011] rmf not generated due to insufficient counts
[Tue Sep 27 23:57:37 2011] Updating aperture counts using extracted products
[Tue Sep 27 23:57:37 2011] Error reading totcts from fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Sep 27 23:57:37 2011] Calculating source flux in energy range 0.30-8.00
[Tue Sep 27 23:57:37 2011] Using photon index=1.80, rate=0.0012, arf fullrun_mos1_xmm0111220101_pi300-10000_pass1_cl_src25.arf
[Tue Sep 27 23:57:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Sep 27 23:57:37 2011] Updating source flux to 1.2e-14
[Tue Sep 27 23:57:39 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting