[Thu Jul  5 18:39:55 2012] Detection parameters:
  Position = (302.7, 297.7) = 11 2 52.38 -60 55 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55.6 +/- 14.1
  Background counts = 57.7
  Rate = 0.01 +/- 0.002

[Thu Jul  5 18:39:55 2012] Off-axis axis estimate = 0.31'
[Thu Jul  5 18:41:26 2012] Using EEF radius (= 6.58 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 18:41:26 2012] Initial guess for spatial extent in simple fitting = 6.58"
[Thu Jul  5 18:41:26 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.987
[Thu Jul  5 18:41:26 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 6.58"
[Thu Jul  5 20:07:45 2012] fullrun_pn_xmm0111210201_pi300-10000_cl_pass0_src32.ximg exists
[Thu Jul  5 20:07:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111210201_pi300-10000_cl_pass0_src32.csv
[Thu Jul  5 20:07:45 2012] fullrun_pn_xmm0111210201_pi300-10000_cl_pass0_src32_1.ximg exists
[Thu Jul  5 20:07:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111210201_pi300-10000_cl_pass0_src32.csv
[Thu Jul  5 20:07:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111210201_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111210201_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 20:07:46 2012] fullrun_pn_xmm0111210201_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Thu Jul  5 20:07:46 2012] fullrun_pn_xmm0111210201_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Thu Jul  5 20:07:46 2012] Fit fullrun_pn_xmm0111210201_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Thu Jul  5 21:35:09 2012] Warning, spatial fit 32 centroid is now closest to src. 26
[Thu Jul  5 21:35:09 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 21:35:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 21:35:09 2012] Assessing source extent using major
[Thu Jul  5 21:35:09 2012] Source does appear to be extended
[Thu Jul  5 21:35:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 21:35:09 2012] Source is confused with source 26
[Thu Jul  5 21:35:27 2012] Using EEF radius (= 6.58 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 21:35:27 2012] Initial guess for spatial extent in simple fitting = 6.58"
[Thu Jul  5 21:35:27 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.987
[Thu Jul  5 21:35:27 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 6.58"
[Thu Jul  5 22:49:48 2012] fullrun_pn_xmm0111210201_pi300-10000_cl_pass1_src25.ximg exists
[Thu Jul  5 22:49:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111210201_pi300-10000_cl_pass1_src25.csv
[Thu Jul  5 22:49:48 2012] fullrun_pn_xmm0111210201_pi300-10000_cl_pass1_src25_1.ximg exists
[Thu Jul  5 22:49:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111210201_pi300-10000_cl_pass1_src25.csv
[Thu Jul  5 22:49:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111210201_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111210201_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 22:49:48 2012] fullrun_pn_xmm0111210201_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Thu Jul  5 22:49:48 2012] fullrun_pn_xmm0111210201_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Thu Jul  5 22:49:48 2012] Fit fullrun_pn_xmm0111210201_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Fri Jul  6 00:03:56 2012] Spatial fit model total counts = 973.146000, observed total counts = 974.000000
[Fri Jul  6 00:03:56 2012] Offset between fit and detection position for source 32 = 6.204709 pixels
[Fri Jul  6 00:03:56 2012] 972.337400 total counts/ 905.953000 bgd. counts: snr = 2.205531
Spatial fit parameters:
  Offset between fit and detection position for source 32 = 6.204709 pixels
  Position = (296.9, 300.1) = 11 2 55.80 -60 55 31.2
  Extent = 13.2 (13.1-26.3)", rotation angle = 0
  Source counts = 66.4 +/- 31.2
  Background counts = 906.0
  Rate = 0.01 +/- 0.005
[Fri Jul  6 00:03:56 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 00:03:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 00:03:56 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 00:03:56 2012] Source does appear to be extended
[Fri Jul  6 00:03:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 00:04:13 2012] XMMSAS src. selection expression = ellipse(25785.768000, 26062.679400, 790.098023, 790.098023, 0.000000, X, Y)
[Fri Jul  6 00:04:13 2012] Writing source region out to fullrun_pn_xmm0111210201_pi300-10000_pass1_cl_src32_src.reg
[Fri Jul  6 00:04:13 2012] Extracting stamp from image fullrun_pn_xmm0111210201_pi300-10000_cl_sm2.00.img.gz, (252, 255) - (342, 346)
[Fri Jul  6 00:04:13 2012] XMMSAS bgd. selection expression = annulus(25785.768000, 26062.679400, 1316.830038, 2633.660076, X, Y) && !ellipse(26739.188000, 29272.718000, 1226.896035, 1226.896035, 0.000000, X, Y) && !ellipse(26491.958740, 28833.946808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26230.446320, 27431.228455, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25629.562744, 27617.754883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24113.256927, 27306.805817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26120.274000, 26423.717200, 1081.440031, 1081.440031, 0.000000, X, Y) && !ellipse(25648.198395, 26753.877380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24460.895844, 26606.286957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26669.078400, 26162.642181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27607.968445, 26286.032013, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27289.194000, 26214.919000, 1144.072033, 1144.072033, 0.000000, X, Y) && !ellipse(25166.979645, 25903.758240, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 00:04:13 2012] Writing fullrun_pn_xmm0111210201_pi300-10000_pass1_cl_src32.gif
[Fri Jul  6 00:13:34 2012] Mean detx,y = (-991.39, 1239.82) 
[Fri Jul  6 00:13:35 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 00:13:49 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 00:13:49 2012] Setting source spectrum file to fullrun_pn_xmm0111210201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri Jul  6 00:13:49 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111210201_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Fri Jul  6 00:40:51 2012] Not generating rmf since there are only 66 counts
[Fri Jul  6 00:40:51 2012] rmf not generated due to insufficient counts
[Fri Jul  6 01:37:57 2012] Updating aperture counts using extracted products
[Fri Jul  6 01:37:57 2012] Error reading totcts from fullrun_pn_xmm0111210201_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri Jul  6 01:37:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 01:37:58 2012] Using photon index=1.80, rate=0.00966, arf fullrun_pn_xmm0111210201_pi300-10000_pass1_cl_src32.arf
[Fri Jul  6 01:37:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 01:37:58 2012] Updating source flux to 2.5e-14
[Fri Jul  6 01:39:16 2012] Flag c found in src. 32 procflags, skipping spectral fitting
[Fri Jul  6 01:39:16 2012] Source 32 has fewer than 100.000000 counts, skipping spectral fitting