[Thu Jul  5 18:40:30 2012] Detection parameters:
  Position = (343.8, 391.7) = 11 2 27.90 -60 48 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.1 +/- 9.1
  Background counts = 11.8
  Rate = 0.005 +/- 0.001

[Thu Jul  5 18:40:30 2012] Off-axis axis estimate = 7.52'
[Thu Jul  5 20:46:16 2012] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 20:46:16 2012] Initial guess for spatial extent in simple fitting = 10.19"
[Thu Jul  5 20:46:16 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.114
[Thu Jul  5 20:46:16 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 10.19"
[Thu Jul  5 21:34:59 2012] fullrun_mos2_xmm0111210201_pi300-10000_cl_pass0_src20.ximg exists
[Thu Jul  5 21:34:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111210201_pi300-10000_cl_pass0_src20.csv
[Thu Jul  5 21:34:59 2012] fullrun_mos2_xmm0111210201_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Jul  5 21:34:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111210201_pi300-10000_cl_pass0_src20.csv
[Thu Jul  5 21:34:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111210201_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111210201_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul  5 21:35:00 2012] fullrun_mos2_xmm0111210201_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Jul  5 21:35:00 2012] fullrun_mos2_xmm0111210201_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Jul  5 21:35:00 2012] Fit fullrun_mos2_xmm0111210201_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Thu Jul  5 21:35:18 2012] Spatial fit model total counts = 232.600000, observed total counts = 211.000000
[Thu Jul  5 21:35:18 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul  5 21:35:18 2012] Vigneting correction estimate = 1.000000
[Thu Jul  5 21:35:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul  5 21:35:18 2012] Assessing source extent using major
[Thu Jul  5 21:35:18 2012] Source does appear to be extended
[Thu Jul  5 21:35:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul  5 23:17:25 2012] Using EEF radius (= 10.19 ")to estimate initial spatial extent for simple fitting
[Thu Jul  5 23:17:25 2012] Initial guess for spatial extent in simple fitting = 10.19"
[Thu Jul  5 23:17:25 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.114
[Thu Jul  5 23:17:25 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 10.19"
[Fri Jul  6 00:03:48 2012] fullrun_mos2_xmm0111210201_pi300-10000_cl_pass1_src17.ximg exists
[Fri Jul  6 00:03:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111210201_pi300-10000_cl_pass1_src17.csv
[Fri Jul  6 00:03:48 2012] fullrun_mos2_xmm0111210201_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Jul  6 00:03:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111210201_pi300-10000_cl_pass1_src17.csv
[Fri Jul  6 00:03:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111210201_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111210201_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul  6 00:03:48 2012] fullrun_mos2_xmm0111210201_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Jul  6 00:03:48 2012] fullrun_mos2_xmm0111210201_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jul  6 00:03:48 2012] Fit fullrun_mos2_xmm0111210201_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Jul  6 00:04:04 2012] Spatial fit model total counts = 227.858000, observed total counts = 211.000000
[Fri Jul  6 00:04:04 2012] Offset between fit and detection position for source 12 = 0.550236 pixels
[Fri Jul  6 00:04:04 2012] 221.938700 total counts/ 162.800000 bgd. counts: snr = 4.634945
Spatial fit parameters:
  Offset between fit and detection position for source 12 = 0.550236 pixels
  Position = (343.8, 392.3) = 11 2 27.94 -60 48 50.3
  Extent = 20.4 (2.5-38.2)", rotation angle = 0
  Source counts = 59.1 +/- 14.9
  Background counts = 162.8
  Rate = 0.005 +/- 0.001
[Fri Jul  6 00:04:04 2012] Vigneting correction estimate = 1.000000
[Fri Jul  6 00:04:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul  6 00:04:04 2012] Assessing source extent using major axis lower bound
[Fri Jul  6 00:04:04 2012] Source does appear to be extended
[Fri Jul  6 00:04:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul  6 00:04:04 2012] Source is confused with source 11
[Fri Jul  6 00:04:04 2012] Source is confused with source 7
[Fri Jul  6 01:00:14 2012] XMMSAS src. selection expression = ellipse(29861.702200, 34077.974000, 1222.692035, 1222.692035, 0.000000, X, Y)
[Fri Jul  6 01:00:14 2012] Writing source region out to fullrun_mos2_xmm0111210201_pi300-10000_pass1_cl_src12_src.reg
[Fri Jul  6 01:00:14 2012] Extracting stamp from image fullrun_mos2_xmm0111210201_pi300-10000_cl_sm2.00.img.gz, (274, 322) - (414, 463)
[Fri Jul  6 01:00:14 2012] XMMSAS bgd. selection expression = annulus(29861.702200, 34077.974000, 2037.820059, 4075.640117, X, Y) && !ellipse(30175.681793, 34755.371033, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31005.904200, 34864.737000, 1943.384056, 1943.384056, 0.000000, X, Y) && !ellipse(26799.893040, 29349.299600, 1401.576040, 1401.576040, 0.000000, X, Y) && !ellipse(31270.793762, 34930.791473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32771.102000, 34539.841800, 1736.192050, 1736.192050, 0.000000, X, Y) && !ellipse(29328.868000, 35412.747000, 1691.280049, 1691.280049, 0.000000, X, Y) && !ellipse(29827.153442, 35547.199005, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul  6 01:00:14 2012] Writing fullrun_mos2_xmm0111210201_pi300-10000_pass1_cl_src12.gif
[Fri Jul  6 01:03:35 2012] Mean detx,y = (-7853.29, -39.54) 
[Fri Jul  6 01:03:36 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul  6 01:03:54 2012] Binned source spectrum to 10 counts/bin
[Fri Jul  6 01:03:54 2012] Setting source spectrum file to fullrun_mos2_xmm0111210201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jul  6 01:03:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111210201_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Fri Jul  6 01:33:12 2012] Not generating rmf since there are only 59 counts
[Fri Jul  6 01:33:12 2012] rmf not generated due to insufficient counts
[Fri Jul  6 01:37:58 2012] Updating aperture counts using extracted products
[Fri Jul  6 01:37:58 2012] Error reading totcts from fullrun_mos2_xmm0111210201_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Fri Jul  6 01:37:58 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul  6 01:37:58 2012] Using photon index=1.80, rate=0.00546, arf fullrun_mos2_xmm0111210201_pi300-10000_pass1_cl_src12.arf
[Fri Jul  6 01:37:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul  6 01:37:58 2012] Updating source flux to 7.1e-14
[Fri Jul  6 01:38:27 2012] Flag p found in src. 12 procflags, skipping spectral fitting
[Fri Jul  6 01:38:27 2012] Flag c found in src. 12 procflags, skipping spectral fitting
[Fri Jul  6 01:38:27 2012] Source 12 has fewer than 100.000000 counts, skipping spectral fitting