[Tue Mar 13 11:36:04 2012] Detection parameters:
  Position = (274.3, 295.2) = 2 42 42.62 -0 0 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 858.7 +/- 41.3
  Background counts = 35.4
  Rate = 0.03 +/- 0.002

[Tue Mar 13 11:36:07 2012] Off-axis axis estimate = 1.77'
[Tue Mar 13 11:36:53 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:36:53 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Mar 13 11:36:53 2012] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.525
[Tue Mar 13 11:36:53 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.31"
[Tue Mar 13 11:36:53 2012] fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_src3.ximg exists
[Tue Mar 13 11:36:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_src3.csv
[Tue Mar 13 11:36:53 2012] fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Mar 13 11:36:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_src3.csv
[Tue Mar 13 11:36:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:36:54 2012] fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Mar 13 11:36:54 2012] fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Mar 13 11:36:54 2012] Fit fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Mar 13 11:37:27 2012] Source 3 is offset by -5.761592 and 5.899983 pixels which is larger than
2 X fitted extent = 3.245214 x 3.245214, not incorporating fit results
[Tue Mar 13 11:37:27 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:37:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:37:27 2012] Assessing source extent using major
[Tue Mar 13 11:37:27 2012] Source does appear to be extended
[Tue Mar 13 11:37:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:37:46 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:37:46 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Tue Mar 13 11:37:46 2012] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.525
[Tue Mar 13 11:37:46 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.31"
[Tue Mar 13 11:37:47 2012] fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_src3.ximg exists
[Tue Mar 13 11:37:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_src3.csv
[Tue Mar 13 11:37:47 2012] fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue Mar 13 11:37:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_src3.csv
[Tue Mar 13 11:37:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:37:48 2012] fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue Mar 13 11:37:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Mar 13 11:37:48 2012] fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue Mar 13 11:37:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue Mar 13 11:37:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:38:09 2012] Source 3 is offset by -5.742420 and 5.899983 pixels which is larger than
2 X fitted extent = 2.364432 x 2.364432, not incorporating fit results
[Tue Mar 13 11:38:09 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:38:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:38:09 2012] Assessing source extent using major
[Tue Mar 13 11:38:09 2012] Source does appear to be extended
[Tue Mar 13 11:38:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:38:44 2012] XMMSAS src. selection expression = ellipse(23811.677460, 25631.750488, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Mar 13 11:38:44 2012] Not overwriting source region fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src3_src.reg
[Tue Mar 13 11:38:44 2012] Extracting stamp from image fullrun_mos2_xmm0111200201_pi300-10000_cl_sm2.00.img.gz, (237, 258) - (312, 333)
[Tue Mar 13 11:38:44 2012] XMMSAS bgd. selection expression = annulus(23811.677460, 25631.750488, 1087.500000, 2175.000000, X, Y) && !ellipse(24374.389600, 24889.819000, 1493.042443, 1493.042443, 0.000000, X, Y)
[Tue Mar 13 11:38:44 2012] Writing fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src3.gif
[Tue Mar 13 11:38:45 2012] ../../xmm0111200201/products/events/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src3_src.evt and ../../xmm0111200201/products/events/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src3_bgd.evt exist, delete to re-create
[Tue Mar 13 11:38:45 2012] Mean detx,y = (-402.09, -515.83) 
[Tue Mar 13 11:38:45 2012] ../../xmm0111200201/products/images/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src3_src.img and ../../xmm0111200201/products/images/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src3_bgd.img exist, delete to re-create
[Tue Mar 13 11:38:45 2012] ../../xmm0111200201/products/spectra/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src3_src_b10.pi.gz and ../../xmm0111200201/products/spectra/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src3_bgd.pi exist, delete to re-create
[Tue Mar 13 11:38:45 2012] Setting source spectrum file to fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Mar 13 11:38:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Tue Mar 13 11:38:45 2012] ../../xmm0111200201/products/lightcurves/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src3_src.lc and ../../xmm0111200201/products/lightcurves/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src3_bgd.lc exist, delete to re-create
[Tue Mar 13 11:38:50 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue Mar 13 11:38:50 2012] rmf not generated due to insufficient counts
[Tue Mar 13 11:38:50 2012] fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src3.arf exists, delete to re-create
[Tue Mar 13 11:39:53 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:39:53 2012] Error reading totcts from fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Tue Mar 13 11:39:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:39:54 2012] Using photon index=1.80, rate=0.0328, arf fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src3.arf
[Tue Mar 13 11:39:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:39:54 2012] Updating source flux to 4.1e-13
[Tue Mar 13 11:40:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting