[Tue Mar 13 11:36:04 2012] Detection parameters:
  Position = (280.8, 286.8) = 2 42 40.73 -0 0 45.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91988.0 +/- 357.4
  Background counts = 37.3
  Rate = 3 +/- 0.01

[Tue Mar 13 11:36:07 2012] Off-axis axis estimate = 1.53'
[Tue Mar 13 11:36:53 2012] Using EEF radius (= 7.20 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:36:53 2012] Initial guess for spatial extent in simple fitting = 7.20"
[Tue Mar 13 11:36:53 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.862
[Tue Mar 13 11:36:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.20"
[Tue Mar 13 11:36:53 2012] fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 13 11:36:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 11:36:53 2012] fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 13 11:36:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 11:36:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:36:54 2012] fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 13 11:36:54 2012] fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 13 11:36:54 2012] Fit fullrun_mos2_xmm0111200201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 13 11:37:27 2012] Spatial fit model total counts = 85858.300000, observed total counts = 85821.000000
[Tue Mar 13 11:37:27 2012] Offset between fit and detection position for source 2 = 0.123083 pixels
[Tue Mar 13 11:37:27 2012] 86057.300000 total counts/ 21411.000000 bgd. counts: snr = 441.799477
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.123083 pixels
  Position = (280.7, 286.7) = 2 42 40.74 -0 0 45.8
  Extent = 6.3 (6.3-6.4)", rotation angle = 0
  Source counts = 64646.3 +/- 293.4
  Background counts = 21411.0
  Rate = 2 +/- 0.008
[Tue Mar 13 11:37:27 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:37:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:37:27 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:37:27 2012] Source does appear to be extended
[Tue Mar 13 11:37:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:37:46 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:37:46 2012] Initial guess for spatial extent in simple fitting = 6.31"
[Tue Mar 13 11:37:46 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.050
[Tue Mar 13 11:37:46 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.31"
[Tue Mar 13 11:37:47 2012] fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 13 11:37:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_src1.csv
[Tue Mar 13 11:37:47 2012] fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 13 11:37:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_src1.csv
[Tue Mar 13 11:37:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:37:48 2012] fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 13 11:37:48 2012] fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 13 11:37:48 2012] Fit fullrun_mos2_xmm0111200201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 13 11:38:09 2012] Spatial fit model total counts = 85323.600000, observed total counts = 85279.000000
[Tue Mar 13 11:38:09 2012] Offset between fit and detection position for source 2 = 0.034837 pixels
[Tue Mar 13 11:38:09 2012] 86462.400000 total counts/ 22693.200000 bgd. counts: snr = 423.314455
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.034837 pixels
  Position = (280.7, 286.6) = 2 42 40.75 -0 0 45.9
  Extent = 6.2 (6.2-6.3)", rotation angle = 0
  Source counts = 63769.2 +/- 294.0
  Background counts = 22693.2
  Rate = 2 +/- 0.008
[Tue Mar 13 11:38:09 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:38:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:38:09 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:38:09 2012] Source does appear to be extended
[Tue Mar 13 11:38:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:38:44 2012] Counts = 63769.200000, rescaling region sizes by 3.000000
[Tue Mar 13 11:38:44 2012] XMMSAS src. selection expression = ellipse(24374.389600, 24889.819000, 1119.781832, 1119.781832, 0.000000, X, Y)
[Tue Mar 13 11:38:44 2012] Not overwriting source region fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2_src.reg
[Tue Mar 13 11:38:44 2012] Extracting stamp from image fullrun_mos2_xmm0111200201_pi300-10000_cl_sm2.00.img.gz, (216, 222) - (345, 351)
[Tue Mar 13 11:38:44 2012] XMMSAS bgd. selection expression = annulus(24374.389600, 24889.819000, 5598.909161, 11197.818322, X, Y) && !ellipse(23256.216125, 17912.283340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23811.677460, 25631.750488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34415.843340, 26623.021400, 505.496815, 505.496815, 0.000000, X, Y) && !ellipse(33954.381200, 28314.607400, 392.124811, 392.124811, 0.000000, X, Y) && !ellipse(33037.631332, 28080.493182, 607.408984, 407.198509, 247.426103, X, Y) && !ellipse(17198.840000, 25908.573000, 378.096011, 378.096011, 0.000000, X, Y) && !ellipse(16138.804749, 24073.893463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35205.183441, 35709.620422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28439.827600, 36342.959200, 650.341619, 360.507210, 21.849487, X, Y)
[Tue Mar 13 11:38:44 2012] Writing fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2.gif
[Tue Mar 13 11:38:44 2012] ../../xmm0111200201/products/events/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0111200201/products/events/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Mar 13 11:38:44 2012] Mean detx,y = (51.49, -183.43) 
[Tue Mar 13 11:38:44 2012] ../../xmm0111200201/products/images/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2_src.img and ../../xmm0111200201/products/images/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Mar 13 11:38:44 2012] ../../xmm0111200201/products/spectra/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0111200201/products/spectra/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Mar 13 11:38:45 2012] Setting source spectrum file to fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 13 11:38:45 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Mar 13 11:38:45 2012] ../../xmm0111200201/products/lightcurves/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0111200201/products/lightcurves/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Mar 13 11:38:50 2012] fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Tue Mar 13 11:38:50 2012] fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Tue Mar 13 11:39:53 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:39:53 2012] Error reading totcts from fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 13 11:39:54 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:39:54 2012] Using photon index=1.80, rate=1.82, arf fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2.arf
[Tue Mar 13 11:39:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:39:54 2012] Updating source flux to 1.8e-11
[Tue Mar 13 11:40:01 2012] Reading fit data from xmm0111200201/analysis//spectral/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2_pl.csv
[Tue Mar 13 11:40:01 2012] Spectral fit parameter nH value = 9.93964e+20
[Tue Mar 13 11:40:01 2012] Spectral fit parameter PhoIndex value = 3.71603
[Tue Mar 13 11:40:01 2012] Failed to get F(0.3-8.0) from xmm0111200201/analysis//spectral/fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Mar 13 11:40:01 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:40:01 2012] Using Nh = 9.9e+20, photon index=3.72, rate=1.82, arf fullrun_mos2_xmm0111200201_pi300-10000_pass1_cl_src2.arf
[Tue Mar 13 11:40:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:40:01 2012] Updating source flux to 1.3e-11