[Tue Mar 13 11:36:00 2012] Detection parameters:
  Position = (280.9, 286.8) = 2 42 40.69 -0 0 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84692.3 +/- 344.9
  Background counts = 32.2
  Rate = 2 +/- 0.009

[Tue Mar 13 11:36:03 2012] Off-axis axis estimate = 1.53'
[Tue Mar 13 11:36:51 2012] Using EEF radius (= 7.19 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:36:51 2012] Initial guess for spatial extent in simple fitting = 7.19"
[Tue Mar 13 11:36:51 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.863
[Tue Mar 13 11:36:51 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.19"
[Tue Mar 13 11:36:51 2012] fullrun_mos1_xmm0111200201_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 13 11:36:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111200201_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 11:36:51 2012] fullrun_mos1_xmm0111200201_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 13 11:36:51 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0111200201_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 11:36:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111200201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111200201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:36:52 2012] fullrun_mos1_xmm0111200201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 13 11:36:52 2012] fullrun_mos1_xmm0111200201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 13 11:36:52 2012] Fit fullrun_mos1_xmm0111200201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 13 11:37:18 2012] Spatial fit model total counts = 82971.900000, observed total counts = 82972.000000
[Tue Mar 13 11:37:18 2012] Offset between fit and detection position for source 2 = 0.259990 pixels
[Tue Mar 13 11:37:18 2012] 82842.800000 total counts/ 23136.900000 bgd. counts: snr = 392.522598
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.259990 pixels
  Position = (280.7, 286.6) = 2 42 40.75 -0 0 46.1
  Extent = 6.9 (6.8-6.9)", rotation angle = 0
  Source counts = 59705.9 +/- 287.8
  Background counts = 23136.9
  Rate = 2 +/- 0.008
[Tue Mar 13 11:37:18 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:37:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:37:18 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:37:18 2012] Source does appear to be extended
[Tue Mar 13 11:37:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:37:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 11:37:45 2012] Initial guess for spatial extent in simple fitting = 6.88"
[Tue Mar 13 11:37:45 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.924
[Tue Mar 13 11:37:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.88"
[Tue Mar 13 11:37:46 2012] fullrun_mos1_xmm0111200201_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 13 11:37:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111200201_pi300-10000_cl_pass1_src1.csv
[Tue Mar 13 11:37:46 2012] fullrun_mos1_xmm0111200201_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 13 11:37:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111200201_pi300-10000_cl_pass1_src1.csv
[Tue Mar 13 11:37:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111200201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111200201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 11:37:46 2012] fullrun_mos1_xmm0111200201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 13 11:37:46 2012] fullrun_mos1_xmm0111200201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 13 11:37:46 2012] Fit fullrun_mos1_xmm0111200201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 13 11:38:04 2012] Spatial fit model total counts = 83047.600000, observed total counts = 83056.000000
[Tue Mar 13 11:38:04 2012] Offset between fit and detection position for source 2 = 0.024719 pixels
[Tue Mar 13 11:38:04 2012] 83375.400000 total counts/ 23739.200000 bgd. counts: snr = 387.058780
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.024719 pixels
  Position = (280.7, 286.6) = 2 42 40.75 -0 0 46.2
  Extent = 6.9 (6.8-6.9)", rotation angle = 0
  Source counts = 59636.2 +/- 288.7
  Background counts = 23739.2
  Rate = 2 +/- 0.008
[Tue Mar 13 11:38:04 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 11:38:04 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 11:38:04 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 11:38:04 2012] Source does appear to be extended
[Tue Mar 13 11:38:04 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 11:38:39 2012] Counts = 59636.200000, rescaling region sizes by 3.000000
[Tue Mar 13 11:38:39 2012] XMMSAS src. selection expression = ellipse(24373.199400, 24883.819400, 1235.998836, 1235.998836, 0.000000, X, Y)
[Tue Mar 13 11:38:39 2012] Not overwriting source region fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2_src.reg
[Tue Mar 13 11:38:39 2012] Extracting stamp from image fullrun_mos1_xmm0111200201_pi300-10000_cl_sm2.00.img.gz, (210, 216) - (352, 358)
[Tue Mar 13 11:38:39 2012] XMMSAS bgd. selection expression = annulus(24373.199400, 24883.819400, 6179.994178, 12359.988356, X, Y) && !ellipse(23260.660645, 17954.793015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34415.427620, 26546.745000, 574.680017, 574.680017, 0.000000, X, Y) && !ellipse(33986.498444, 28246.123322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36352.015381, 26240.532776, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17196.054672, 25895.734741, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37519.466278, 19157.437653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16125.214981, 24062.776855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28401.615112, 36319.470032, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 11:38:39 2012] Writing fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2.gif
[Tue Mar 13 11:38:40 2012] ../../xmm0111200201/products/events/fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2_src.evt and ../../xmm0111200201/products/events/fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2_bgd.evt exist, delete to re-create
[Tue Mar 13 11:38:40 2012] Mean detx,y = (34.15, -204.39) 
[Tue Mar 13 11:38:40 2012] ../../xmm0111200201/products/images/fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2_src.img and ../../xmm0111200201/products/images/fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2_bgd.img exist, delete to re-create
[Tue Mar 13 11:38:40 2012] ../../xmm0111200201/products/spectra/fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2_src_b10.pi.gz and ../../xmm0111200201/products/spectra/fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2_bgd.pi exist, delete to re-create
[Tue Mar 13 11:38:40 2012] Setting source spectrum file to fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 13 11:38:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Tue Mar 13 11:38:40 2012] ../../xmm0111200201/products/lightcurves/fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2_src.lc and ../../xmm0111200201/products/lightcurves/fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2_bgd.lc exist, delete to re-create
[Tue Mar 13 11:38:44 2012] fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2.rmf exists, delete to re-create
[Tue Mar 13 11:38:44 2012] fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2.arf exists, delete to re-create
[Tue Mar 13 11:39:52 2012] Updating aperture counts using extracted products
[Tue Mar 13 11:39:52 2012] Error reading totcts from fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Tue Mar 13 11:39:52 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:39:52 2012] Using photon index=1.80, rate=1.58, arf fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2.arf
[Tue Mar 13 11:39:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:39:52 2012] Updating source flux to 1.4e-11
[Tue Mar 13 11:40:00 2012] Reading fit data from xmm0111200201/analysis//spectral/fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2_pl.csv
[Tue Mar 13 11:40:00 2012] Spectral fit parameter nH value = 9.54374e+20
[Tue Mar 13 11:40:00 2012] Spectral fit parameter PhoIndex value = 3.60918
[Tue Mar 13 11:40:00 2012] Failed to get F(0.3-8.0) from xmm0111200201/analysis//spectral/fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Tue Mar 13 11:40:00 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 11:40:00 2012] Using Nh = 9.5e+20, photon index=3.61, rate=1.58, arf fullrun_mos1_xmm0111200201_pi300-10000_pass1_cl_src2.arf
[Tue Mar 13 11:40:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 11:40:00 2012] Updating source flux to 9.9e-12