[Tue Mar 13 10:03:14 2012] Detection parameters:
  Position = (267.9, 207.1) = 2 42 44.37 -0 6 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 14994.4 +/- 146.9
  Background counts = 53.6
  Rate = 0.6 +/- 0.006

[Tue Mar 13 10:03:20 2012] Off-axis axis estimate = 6.98'
[Tue Mar 13 10:04:20 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:04:20 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Tue Mar 13 10:04:20 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.164
[Tue Mar 13 10:04:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.92"
[Tue Mar 13 10:04:21 2012] fullrun_pn_xmm0111200101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Mar 13 10:04:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111200101_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 10:04:21 2012] fullrun_pn_xmm0111200101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Mar 13 10:04:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111200101_pi300-10000_cl_pass0_src1.csv
[Tue Mar 13 10:04:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111200101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111200101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:04:22 2012] fullrun_pn_xmm0111200101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Mar 13 10:04:22 2012] fullrun_pn_xmm0111200101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Mar 13 10:04:22 2012] Fit fullrun_pn_xmm0111200101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Mar 13 10:04:44 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 12.277932 pixels away
[Tue Mar 13 10:04:44 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:04:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:04:44 2012] Assessing source extent using major
[Tue Mar 13 10:04:44 2012] Source does appear to be extended
[Tue Mar 13 10:04:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:05:24 2012] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:05:24 2012] Initial guess for spatial extent in simple fitting = 9.92"
[Tue Mar 13 10:05:24 2012] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.164
[Tue Mar 13 10:05:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 9.92"
[Tue Mar 13 10:05:24 2012] fullrun_pn_xmm0111200101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Mar 13 10:05:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111200101_pi300-10000_cl_pass1_src1.csv
[Tue Mar 13 10:05:24 2012] fullrun_pn_xmm0111200101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Mar 13 10:05:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111200101_pi300-10000_cl_pass1_src1.csv
[Tue Mar 13 10:05:24 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111200101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111200101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:05:25 2012] fullrun_pn_xmm0111200101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Mar 13 10:05:25 2012] fullrun_pn_xmm0111200101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Mar 13 10:05:25 2012] Fit fullrun_pn_xmm0111200101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Mar 13 10:05:41 2012] Spatial fit model total counts = 13926.400000, observed total counts = 13924.000000
[Tue Mar 13 10:05:41 2012] Offset between fit and detection position for source 1 = 0.152868 pixels
[Tue Mar 13 10:05:41 2012] 13957.980000 total counts/ 2898.280000 bgd. counts: snr = 205.434404
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.152868 pixels
  Position = (267.9, 207.3) = 2 42 44.35 -0 6 32.2
  Extent = 6.1 (6.0-6.2)", rotation angle = 0
  Source counts = 11059.7 +/- 118.1
  Background counts = 2898.3
  Rate = 0.3 +/- 0.003
[Tue Mar 13 10:05:41 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:05:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:05:41 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:05:41 2012] Source does appear to be extended
[Tue Mar 13 10:05:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:06:08 2012] Counts = 11059.700000, rescaling region sizes by 3.000000
[Tue Mar 13 10:06:08 2012] XMMSAS src. selection expression = ellipse(23263.124400, 17985.417800, 1092.989335, 1092.989335, 0.000000, X, Y)
[Tue Mar 13 10:06:08 2012] Not overwriting source region fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1_src.reg
[Tue Mar 13 10:06:08 2012] Extracting stamp from image fullrun_pn_xmm0111200101_pi300-10000_cl_sm2.00.img.gz, (205, 144) - (331, 270)
[Tue Mar 13 10:06:08 2012] XMMSAS bgd. selection expression = annulus(23263.124400, 17985.417800, 5464.946673, 10929.893346, X, Y) && !ellipse(24366.704200, 24897.704400, 1969.872057, 1969.872057, 0.000000, X, Y) && !ellipse(34440.853607, 26582.728882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33079.067841, 28052.699127, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32098.000000, 23219.911255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18510.886355, 21070.703643, 502.522967, 406.755408, 22.681938, X, Y) && !ellipse(33974.248138, 28304.541931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16721.394400, 27665.206200, 644.649619, 372.844811, 113.018500, X, Y) && !ellipse(22362.241000, 26378.446600, 290.849608, 290.849608, 0.000000, X, Y) && !ellipse(16138.103821, 24117.234161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32346.235691, 23662.048255, 1485.192043, 249.340793, 295.167923, X, Y) && !ellipse(33346.070862, 23860.187500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24220.172000, 23443.992000, 342.072010, 342.072010, 0.000000, X, Y) && !ellipse(23803.145540, 21657.451800, 315.816809, 315.816809, 0.000000, X, Y) && !ellipse(33503.617645, 28671.862579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22960.711365, 23677.640961, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24864.152313, 23136.447754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23454.600000, 22173.000000, 1290.024037, 1290.024037, 0.000000, X, Y) && !ellipse(20125.161316, 20312.149719, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Mar 13 10:06:08 2012] Writing fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1.gif
[Tue Mar 13 10:06:11 2012] ../../xmm0111200101/products/events/fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0111200101/products/events/fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Tue Mar 13 10:06:11 2012] Mean detx,y = (-900.61, -6880.21) 
[Tue Mar 13 10:06:11 2012] ../../xmm0111200101/products/images/fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0111200101/products/images/fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Tue Mar 13 10:06:11 2012] ../../xmm0111200101/products/spectra/fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0111200101/products/spectra/fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Tue Mar 13 10:06:11 2012] Setting source spectrum file to fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 13 10:06:11 2012] Setting bgd. spectrum file to fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Mar 13 10:06:11 2012] ../../xmm0111200101/products/lightcurves/fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0111200101/products/lightcurves/fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Tue Mar 13 10:06:28 2012] fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Tue Mar 13 10:06:28 2012] fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Tue Mar 13 10:07:43 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:07:43 2012] Error reading totcts from fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Mar 13 10:07:45 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:07:45 2012] Using photon index=1.80, rate=0.313, arf fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1.arf
[Tue Mar 13 10:07:45 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:07:45 2012] Updating source flux to 1.1e-12
[Tue Mar 13 10:07:57 2012] Reading fit data from xmm0111200101/analysis//spectral/fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1_pl.csv
[Tue Mar 13 10:07:57 2012] Spectral fit parameter nH value = 2.24646e+21
[Tue Mar 13 10:07:57 2012] Spectral fit parameter PhoIndex value = 3.17494
[Tue Mar 13 10:07:57 2012] Failed to get F(0.3-8.0) from xmm0111200101/analysis//spectral/fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Mar 13 10:07:57 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:07:57 2012] Using Nh = 2.2e+21, photon index=3.17, rate=0.313, arf fullrun_pn_xmm0111200101_pi300-10000_pass1_cl_src1.arf
[Tue Mar 13 10:07:57 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:07:57 2012] Updating source flux to 8.2e-13