[Tue Mar 13 10:03:24 2012] Detection parameters:
  Position = (197.9, 298.2) = 2 43 4.66 0 0 4.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.6 +/- 16.8
  Background counts = 17.4
  Rate = 0.006 +/- 0.0006

[Tue Mar 13 10:03:28 2012] Off-axis axis estimate = 7.29'
[Tue Mar 13 10:04:22 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:04:22 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Tue Mar 13 10:04:22 2012] source mask rpix=2.3, npix_max = 31, mask sum = 32, frac = 1.009
[Tue Mar 13 10:04:22 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.07"
[Tue Mar 13 10:04:24 2012] fullrun_mos1_xmm0111200101_pi300-10000_cl_pass0_src7.ximg exists
[Tue Mar 13 10:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111200101_pi300-10000_cl_pass0_src7.csv
[Tue Mar 13 10:04:24 2012] fullrun_mos1_xmm0111200101_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Mar 13 10:04:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111200101_pi300-10000_cl_pass0_src7.csv
[Tue Mar 13 10:04:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111200101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111200101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:04:25 2012] fullrun_mos1_xmm0111200101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Mar 13 10:04:25 2012] fullrun_mos1_xmm0111200101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Mar 13 10:04:25 2012] Fit fullrun_mos1_xmm0111200101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Tue Mar 13 10:04:56 2012] Spatial fit model total counts = 260.000000, observed total counts = 260.000000
[Tue Mar 13 10:04:56 2012] Offset between fit and detection position for source 13 = 0.336892 pixels
[Tue Mar 13 10:04:56 2012] 263.866000 total counts/ 127.118000 bgd. counts: snr = 12.128789
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.336892 pixels
  Position = (197.8, 298.5) = 2 43 4.71 0 0 4.4
  Extent = 6.0 (5.2-7.1)", rotation angle = 0
  Source counts = 136.7 +/- 16.2
  Background counts = 127.1
  Rate = 0.004 +/- 0.0004
[Tue Mar 13 10:04:56 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:04:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:04:56 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:04:56 2012] Source does appear to be extended
[Tue Mar 13 10:04:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:05:25 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 13 10:05:25 2012] Initial guess for spatial extent in simple fitting = 6.02"
[Tue Mar 13 10:05:25 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.845
[Tue Mar 13 10:05:25 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 6.02"
[Tue Mar 13 10:05:26 2012] fullrun_mos1_xmm0111200101_pi300-10000_cl_pass1_src7.ximg exists
[Tue Mar 13 10:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111200101_pi300-10000_cl_pass1_src7.csv
[Tue Mar 13 10:05:26 2012] fullrun_mos1_xmm0111200101_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue Mar 13 10:05:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0111200101_pi300-10000_cl_pass1_src7.csv
[Tue Mar 13 10:05:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0111200101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0111200101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 13 10:05:26 2012] fullrun_mos1_xmm0111200101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue Mar 13 10:05:26 2012] fullrun_mos1_xmm0111200101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue Mar 13 10:05:26 2012] Fit fullrun_mos1_xmm0111200101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue Mar 13 10:05:47 2012] Spatial fit model total counts = 260.000000, observed total counts = 260.000000
[Tue Mar 13 10:05:47 2012] Offset between fit and detection position for source 13 = 0.001166 pixels
[Tue Mar 13 10:05:47 2012] 263.880000 total counts/ 127.337000 bgd. counts: snr = 12.100188
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.001166 pixels
  Position = (197.8, 298.5) = 2 43 4.71 0 0 4.4
  Extent = 6.0 (5.2-7.1)", rotation angle = 0
  Source counts = 136.5 +/- 16.2
  Background counts = 127.3
  Rate = 0.004 +/- 0.0004
[Tue Mar 13 10:05:47 2012] Vigneting correction estimate = 1.000000
[Tue Mar 13 10:05:47 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 13 10:05:47 2012] Assessing source extent using major axis lower bound
[Tue Mar 13 10:05:47 2012] Source does appear to be extended
[Tue Mar 13 10:05:47 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 13 10:06:28 2012] XMMSAS src. selection expression = ellipse(17156.058800, 25917.086600, 360.044410, 360.044410, 0.000000, X, Y)
[Tue Mar 13 10:06:28 2012] Not overwriting source region fullrun_mos1_xmm0111200101_pi300-10000_pass1_cl_src13_src.reg
[Tue Mar 13 10:06:28 2012] Extracting stamp from image fullrun_mos1_xmm0111200101_pi300-10000_cl_sm2.00.img.gz, (177, 278) - (218, 319)
[Tue Mar 13 10:06:28 2012] XMMSAS bgd. selection expression = annulus(17156.058800, 25917.086600, 600.074017, 1200.148035, X, Y)
[Tue Mar 13 10:06:28 2012] Writing fullrun_mos1_xmm0111200101_pi300-10000_pass1_cl_src13.gif
[Tue Mar 13 10:06:29 2012] ../../xmm0111200101/products/events/fullrun_mos1_xmm0111200101_pi300-10000_pass1_cl_src13_src.evt and ../../xmm0111200101/products/events/fullrun_mos1_xmm0111200101_pi300-10000_pass1_cl_src13_bgd.evt exist, delete to re-create
[Tue Mar 13 10:06:29 2012] Mean detx,y = (1243.50, 6976.58) 
[Tue Mar 13 10:06:29 2012] ../../xmm0111200101/products/images/fullrun_mos1_xmm0111200101_pi300-10000_pass1_cl_src13_src.img and ../../xmm0111200101/products/images/fullrun_mos1_xmm0111200101_pi300-10000_pass1_cl_src13_bgd.img exist, delete to re-create
[Tue Mar 13 10:06:29 2012] ../../xmm0111200101/products/spectra/fullrun_mos1_xmm0111200101_pi300-10000_pass1_cl_src13_src_b10.pi.gz and ../../xmm0111200101/products/spectra/fullrun_mos1_xmm0111200101_pi300-10000_pass1_cl_src13_bgd.pi exist, delete to re-create
[Tue Mar 13 10:06:29 2012] Setting source spectrum file to fullrun_mos1_xmm0111200101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Mar 13 10:06:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0111200101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Tue Mar 13 10:06:29 2012] ../../xmm0111200101/products/lightcurves/fullrun_mos1_xmm0111200101_pi300-10000_pass1_cl_src13_src.lc and ../../xmm0111200101/products/lightcurves/fullrun_mos1_xmm0111200101_pi300-10000_pass1_cl_src13_bgd.lc exist, delete to re-create
[Tue Mar 13 10:06:33 2012] fullrun_mos1_xmm0111200101_pi300-10000_pass1_cl_src13.rmf exists, delete to re-create
[Tue Mar 13 10:06:33 2012] fullrun_mos1_xmm0111200101_pi300-10000_pass1_cl_src13.arf exists, delete to re-create
[Tue Mar 13 10:07:47 2012] Updating aperture counts using extracted products
[Tue Mar 13 10:07:47 2012] Error reading totcts from fullrun_mos1_xmm0111200101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Tue Mar 13 10:07:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Mar 13 10:07:48 2012] Using photon index=1.80, rate=0.00352, arf fullrun_mos1_xmm0111200101_pi300-10000_pass1_cl_src13.arf
[Tue Mar 13 10:07:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Mar 13 10:07:48 2012] Updating source flux to 5.5e-14