[Sun Jun  9 16:26:06 2013] Detection parameters:
  Position = (305.9, 247.1) = 12 42 44.34 2 39 10.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 450.1 +/- 37.4
  Background counts = 306.1
  Rate = 0.01 +/- 0.0008

[Sun Jun  9 16:26:07 2013] Off-axis axis estimate = 3.76'
[Sun Jun  9 16:26:57 2013] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:26:57 2013] Initial guess for spatial extent in simple fitting = 8.31"
[Sun Jun  9 16:26:57 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.861
[Sun Jun  9 16:26:57 2013] Giving source the simple spatial ID 88 for pass 0, mean size = 8.31"
[Sun Jun  9 16:27:01 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src88.ximg exists
[Sun Jun  9 16:27:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src88.csv
[Sun Jun  9 16:27:01 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src88_1.ximg exists
[Sun Jun  9 16:27:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src88.csv
[Sun Jun  9 16:27:01 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src88_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 16:27:03 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Sun Jun  9 16:27:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src88.csv
[Sun Jun  9 16:27:03 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Sun Jun  9 16:27:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src88.csv
[Sun Jun  9 16:27:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src88_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 16:27:32 2013] Warning, spatial fit 88 centroid is now closest to src. 16
[Sun Jun  9 16:27:32 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 16:27:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 16:27:32 2013] Assessing source extent using major
[Sun Jun  9 16:27:32 2013] Source does appear to be extended
[Sun Jun  9 16:27:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 16:27:32 2013] Source is confused with source 95
[Sun Jun  9 16:28:23 2013] Using EEF radius (= 8.31 ")to estimate initial spatial extent for simple fitting
[Sun Jun  9 16:28:23 2013] Initial guess for spatial extent in simple fitting = 8.31"
[Sun Jun  9 16:28:23 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.861
[Sun Jun  9 16:28:23 2013] Giving source the simple spatial ID 71 for pass 1, mean size = 8.31"
[Sun Jun  9 16:28:24 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src71.ximg exists
[Sun Jun  9 16:28:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src71.csv
[Sun Jun  9 16:28:24 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src71_1.ximg exists
[Sun Jun  9 16:28:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src71.csv
[Sun Jun  9 16:28:25 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 16:28:26 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Sun Jun  9 16:28:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src71.csv
[Sun Jun  9 16:28:26 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Sun Jun  9 16:28:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src71.csv
[Sun Jun  9 16:28:26 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun  9 16:28:51 2013] Warning, spatial fit 71 centroid is now closest to src. 3
[Sun Jun  9 16:28:51 2013] Vigneting correction estimate = 1.000000
[Sun Jun  9 16:28:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun  9 16:28:51 2013] Assessing source extent using major
[Sun Jun  9 16:28:51 2013] Source does appear to be extended
[Sun Jun  9 16:28:51 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun  9 16:29:32 2013] XMMSAS src. selection expression = ellipse(26567.873993, 21448.893875, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jun  9 16:29:32 2013] Not overwriting source region fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src96_src.reg
[Sun Jun  9 16:29:32 2013] Extracting stamp from image fullrun_pn_xmm0111190701_pi300-10000_cl_sm2.00.img.gz, (268, 210) - (343, 285)
[Sun Jun  9 16:29:32 2013] XMMSAS bgd. selection expression = annulus(26567.873993, 21448.893875, 1087.500000, 2175.000000, X, Y) && !ellipse(24918.648800, 23962.382000, 4350.504125, 4350.504125, 0.000000, X, Y) && !ellipse(25973.139465, 22703.946136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24987.648346, 22217.242096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27509.122800, 22871.654800, 522.374415, 522.374415, 0.000000, X, Y) && !ellipse(26377.538000, 22069.080000, 1341.528039, 558.437616, 5.363940, X, Y) && !ellipse(24401.699800, 20764.567200, 446.363213, 446.363213, 0.000000, X, Y) && !ellipse(27698.943024, 23463.908447, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28526.884705, 22297.915161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27985.869385, 22496.572418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28461.976000, 21930.006000, 1295.032037, 1295.032037, 0.000000, X, Y) && !ellipse(27029.392426, 21355.232407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28220.818237, 21086.102707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25021.059235, 21109.651489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27359.340881, 21011.934464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28339.142000, 20127.980000, 810.320023, 810.320023, 0.000000, X, Y) && !ellipse(26785.294342, 20760.597443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25832.808000, 19906.894000, 1401.560040, 1401.560040, 0.000000, X, Y) && !ellipse(27804.220000, 20067.314000, 1284.584037, 1284.584037, 0.000000, X, Y) && !ellipse(23786.199799, 19846.452271, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun  9 16:29:32 2013] Writing fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src96.gif
[Sun Jun  9 16:37:35 2013] Mean detx,y = (76.24, -2829.96) 
[Sun Jun  9 16:37:36 2013] Setting backscal keywords in source and bgd. spectrum
[Sun Jun  9 16:37:55 2013] Binned source spectrum to 10 counts/bin
[Sun Jun  9 16:37:55 2013] Setting source spectrum file to fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src96_src_b10.pi.gz
[Sun Jun  9 16:37:55 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src96_bgd.pi.gz
[Sun Jun  9 16:55:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jun  9 16:55:18 2013] rmf not generated due to insufficient counts
[Sun Jun  9 17:08:03 2013] Updating aperture counts using extracted products
[Sun Jun  9 17:08:03 2013] Total counts from fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src96_src_b10.pi.gz = 3462.00
[Sun Jun  9 17:08:03 2013] Total counts from fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src96_bgd.pi.gz = 0.00
[Sun Jun  9 17:08:03 2013] Got source and background scale factors 1105405.000000, 0.000000
[Sun Jun  9 17:08:03 2013] Background scale factor is not positive, halting re-assessment of this source
[Sun Jun  9 17:08:07 2013] Calculating source flux in energy range 0.30-8.00
[Sun Jun  9 17:08:07 2013] Using photon index=1.80, rate=0.00981, arf fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src96.arf
[Sun Jun  9 17:08:07 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun  9 17:08:07 2013] Updating source flux to 3.2e-14
[Sun Jun  9 17:08:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun Jun  9 17:08:33 2013] xmm0111190701/analysis//spectral/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src96_pl.csv not found, spectral fit skipped or did not complete