[Sun Jun 9 16:26:03 2013] Detection parameters: Position = (318.9, 270.3) = 12 42 40.57 2 40 56.4 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 515.7 +/- 34.3 Background counts = 374.9 Rate = 0.01 +/- 0.0008 [Sun Jun 9 16:26:07 2013] Off-axis axis estimate = 2.53' [Sun Jun 9 16:26:57 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 16:26:57 2013] Initial guess for spatial extent in simple fitting = 7.69" [Sun Jun 9 16:26:57 2013] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.923 [Sun Jun 9 16:26:57 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 7.69" [Sun Jun 9 16:26:59 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src22.ximg exists [Sun Jun 9 16:26:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src22.csv [Sun Jun 9 16:26:59 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src22_1.ximg exists [Sun Jun 9 16:26:59 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src22.csv [Sun Jun 9 16:26:59 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src22_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 16:27:01 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src22.ximg exists [Sun Jun 9 16:27:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src22.csv [Sun Jun 9 16:27:01 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists [Sun Jun 9 16:27:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src22.csv [Sun Jun 9 16:27:01 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src22_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 16:27:32 2013] Source 27 is offset by 7.009023 and -7.030386 pixels which is larger than 2 X fitted extent = 3.476124 x 1.139807, not incorporating fit results [Sun Jun 9 16:27:32 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 16:27:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 16:27:32 2013] Assessing source extent using major [Sun Jun 9 16:27:32 2013] Source does appear to be extended [Sun Jun 9 16:27:32 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 16:27:32 2013] Source is confused with source 15 [Sun Jun 9 16:28:23 2013] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 16:28:23 2013] Initial guess for spatial extent in simple fitting = 7.69" [Sun Jun 9 16:28:23 2013] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.923 [Sun Jun 9 16:28:23 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 7.69" [Sun Jun 9 16:28:24 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src22.ximg exists [Sun Jun 9 16:28:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src22.csv [Sun Jun 9 16:28:24 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src22_1.ximg exists [Sun Jun 9 16:28:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src22.csv [Sun Jun 9 16:28:24 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src22_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 16:28:25 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src22.ximg exists [Sun Jun 9 16:28:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src22.csv [Sun Jun 9 16:28:25 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists [Sun Jun 9 16:28:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src22.csv [Sun Jun 9 16:28:25 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src22_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 16:28:51 2013] Warning, spatial fit 22 centroid is now closest to src. 90 [Sun Jun 9 16:28:51 2013] Spatial fit model total counts = -1832.520000, observed total counts = 3024.000000 [Sun Jun 9 16:28:51 2013] Poor agreement between spatial fit and data for source 27 It may help to tweak spatial fit manually Not incorporating fit results [Sun Jun 9 16:28:51 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 16:28:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 16:28:51 2013] Assessing source extent using major [Sun Jun 9 16:28:51 2013] Source does appear to be extended [Sun Jun 9 16:28:51 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 16:29:31 2013] XMMSAS src. selection expression = ellipse(27698.943024, 23463.908447, 652.500000, 652.500000, 0.000000, X, Y) [Sun Jun 9 16:29:31 2013] Not overwriting source region fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src27_src.reg [Sun Jun 9 16:29:31 2013] Extracting stamp from image fullrun_pn_xmm0111190701_pi300-10000_cl_sm2.00.img.gz, (281, 233) - (356, 308) [Sun Jun 9 16:29:31 2013] XMMSAS bgd. selection expression = annulus(27698.943024, 23463.908447, 1087.500000, 2175.000000, X, Y) && !ellipse(24918.648800, 23962.382000, 4350.504125, 4350.504125, 0.000000, X, Y) && !ellipse(25973.139465, 22703.946136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24987.648346, 22217.242096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27509.122800, 22871.654800, 522.374415, 522.374415, 0.000000, X, Y) && !ellipse(26377.538000, 22069.080000, 1341.528039, 558.437616, 5.363940, X, Y) && !ellipse(27139.000000, 26240.033630, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26245.200317, 25774.463623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26533.324000, 26342.640000, 1052.480030, 1052.480030, 0.000000, X, Y) && !ellipse(27587.766327, 25623.214569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27730.750275, 25266.652100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28511.227997, 24751.483490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30084.608978, 24560.517853, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28526.884705, 22297.915161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27985.869385, 22496.572418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28461.976000, 21930.006000, 1295.032037, 1295.032037, 0.000000, X, Y) && !ellipse(27029.392426, 21355.232407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26567.873993, 21448.893875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28220.818237, 21086.102707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25021.059235, 21109.651489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27359.340881, 21011.934464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26785.294342, 20760.597443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25832.808000, 19906.894000, 1401.560040, 1401.560040, 0.000000, X, Y) && !ellipse(27804.220000, 20067.314000, 1284.584037, 1284.584037, 0.000000, X, Y) [Sun Jun 9 16:29:31 2013] Writing fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src27.gif [Sun Jun 9 16:29:40 2013] ../../xmm0111190701/products/events/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src27_src.evt and ../../xmm0111190701/products/events/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src27_bgd.evt exist, delete to re-create [Sun Jun 9 16:29:41 2013] Mean detx,y = (-1549.28, -1593.59) [Sun Jun 9 16:29:41 2013] ../../xmm0111190701/products/images/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src27_src.img and ../../xmm0111190701/products/images/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src27_bgd.img exist, delete to re-create [Sun Jun 9 16:29:41 2013] ../../xmm0111190701/products/spectra/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src27_src.pi and ../../xmm0111190701/products/spectra/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src27_bgd.pi exist, delete to re-create [Sun Jun 9 16:29:41 2013] Setting source spectrum file to fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src27_src.pi.gz [Sun Jun 9 16:29:41 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src27_bgd.pi.gz [Sun Jun 9 16:29:41 2013] ../../xmm0111190701/products/lightcurves/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src27_src.lc and ../../xmm0111190701/products/lightcurves/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src27_bgd.lc exist, delete to re-create [Sun Jun 9 16:50:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun Jun 9 16:50:31 2013] rmf not generated due to insufficient counts [Sun Jun 9 17:07:55 2013] Updating aperture counts using extracted products [Sun Jun 9 17:07:55 2013] Total counts from fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src27_src.pi.gz = 3652.00 [Sun Jun 9 17:07:55 2013] Total counts from fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src27_bgd.pi.gz = 1055.00 [Sun Jun 9 17:07:55 2013] Got source and background scale factors 941550.000000, 608911.000000 [Sun Jun 9 17:07:55 2013] User source parameters: Position = (318.9, 270.3) = 12 42 40.57 2 40 56.4 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 2020.7 +/- 61.4 Background aperture counts = 1631.3 Rate = 0.04 +/- 0.001 [Sun Jun 9 17:07:55 2013] Updating counts from extracted products [Sun Jun 9 17:07:55 2013] Set source signif. to 2020.67/40.39 = 50.03 [Sun Jun 9 17:08:06 2013] No arf file for this source, not re-computing flux [Sun Jun 9 17:08:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun Jun 9 17:08:33 2013] xmm0111190701/analysis//spectral/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src27_pl.csv not found, spectral fit skipped or did not complete