[Sun Jun 9 16:26:06 2013] Detection parameters: Position = (329.6, 235.2) = 12 42 37.47 2 38 19.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 137.9 +/- 24.2 Background counts = 199.1 Rate = 0.003 +/- 0.0006 [Sun Jun 9 16:26:07 2013] Off-axis axis estimate = 5.11' [Sun Jun 9 16:26:57 2013] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting [Sun Jun 9 16:26:57 2013] Initial guess for spatial extent in simple fitting = 8.98" [Sun Jun 9 16:26:57 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.950 [Sun Jun 9 16:26:57 2013] Giving source the simple spatial ID 93 for pass 0, mean size = 8.98" [Sun Jun 9 16:27:01 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src93.ximg exists [Sun Jun 9 16:27:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src93.csv [Sun Jun 9 16:27:01 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src93_1.ximg exists [Sun Jun 9 16:27:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src93.csv [Sun Jun 9 16:27:01 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src93_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 16:27:03 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src93.ximg exists [Sun Jun 9 16:27:03 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists [Sun Jun 9 16:27:03 2013] Fit fullrun_pn_xmm0111190701_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly [Sun Jun 9 16:27:32 2013] Spatial fit model total counts = 2157.600000, observed total counts = 2177.000000 [Sun Jun 9 16:27:32 2013] Offset between fit and detection position for source 101 = 4.652354 pixels [Sun Jun 9 16:27:32 2013] Warning, changing simple spatial fit ID from 93 to 92 [Sun Jun 9 16:27:32 2013] 3358.754000 total counts/ 2596.190000 bgd. counts: snr = 14.966080 Spatial fit parameters: Offset between fit and detection position for source 101 = 4.652354 pixels Position = (326.3, 231.9) = 12 42 38.43 2 38 4.4 Extent = 10.1 (10.1-10.1)", rotation angle = 0 Source counts = 762.6 +/- 58.0 Background counts = 2596.2 Rate = 0.01 +/- 0.001 [Sun Jun 9 16:27:32 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 16:27:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 16:27:32 2013] Assessing source extent using major axis lower bound [Sun Jun 9 16:27:32 2013] Source does appear to be extended [Sun Jun 9 16:27:32 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 16:27:32 2013] Source is confused with source 104 [Sun Jun 9 16:28:23 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sun Jun 9 16:28:23 2013] Initial guess for spatial extent in simple fitting = 10.13" [Sun Jun 9 16:28:23 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.125 [Sun Jun 9 16:28:23 2013] Giving source the simple spatial ID 76 for pass 1, mean size = 10.13" [Sun Jun 9 16:28:25 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src76.ximg exists [Sun Jun 9 16:28:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src76.csv [Sun Jun 9 16:28:25 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src76_1.ximg exists [Sun Jun 9 16:28:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src76.csv [Sun Jun 9 16:28:25 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src76_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Jun 9 16:28:26 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src76.ximg exists [Sun Jun 9 16:28:26 2013] fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists [Sun Jun 9 16:28:26 2013] Fit fullrun_pn_xmm0111190701_pi300-10000_cl_pass1_tfrozen_src76 appears to have run properly [Sun Jun 9 16:28:51 2013] Source 101 is offset by -3.263793 and -3.530782 pixels which is larger than 2 X fitted extent = 1.168225 x 1.168225, not incorporating fit results [Sun Jun 9 16:28:51 2013] Vigneting correction estimate = 1.000000 [Sun Jun 9 16:28:51 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Jun 9 16:28:51 2013] Assessing source extent using major axis lower bound [Sun Jun 9 16:28:51 2013] Source does appear to be extended [Sun Jun 9 16:28:51 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jun 9 16:29:33 2013] XMMSAS src. selection expression = ellipse(28339.142000, 20127.980000, 607.740017, 607.740017, 0.000000, X, Y) [Sun Jun 9 16:29:33 2013] Not overwriting source region fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src101_src.reg [Sun Jun 9 16:29:33 2013] Extracting stamp from image fullrun_pn_xmm0111190701_pi300-10000_cl_sm2.00.img.gz, (291, 197) - (361, 267) [Sun Jun 9 16:29:33 2013] XMMSAS bgd. selection expression = annulus(28339.142000, 20127.980000, 1012.900029, 2025.800058, X, Y) && !ellipse(24918.648800, 23962.382000, 4350.504125, 4350.504125, 0.000000, X, Y) && !ellipse(25973.139465, 22703.946136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26377.538000, 22069.080000, 1341.528039, 558.437616, 5.363940, X, Y) && !ellipse(28526.884705, 22297.915161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27985.869385, 22496.572418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28461.976000, 21930.006000, 1295.032037, 1295.032037, 0.000000, X, Y) && !ellipse(27029.392426, 21355.232407, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26567.873993, 21448.893875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28220.818237, 21086.102707, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27359.340881, 21011.934464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26785.294342, 20760.597443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25832.808000, 19906.894000, 1401.560040, 1401.560040, 0.000000, X, Y) && !ellipse(27804.220000, 20067.314000, 1284.584037, 1284.584037, 0.000000, X, Y) [Sun Jun 9 16:29:33 2013] Writing fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src101.gif [Sun Jun 9 16:40:41 2013] Mean detx,y = (-917.09, -4744.49) [Sun Jun 9 16:40:45 2013] Setting backscal keywords in source and bgd. spectrum [Sun Jun 9 16:41:01 2013] Binned source spectrum to 10 counts/bin [Sun Jun 9 16:41:02 2013] Setting source spectrum file to fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src101_src_b10.pi.gz [Sun Jun 9 16:41:02 2013] Setting bgd. spectrum file to fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src101_bgd.pi.gz [Sun Jun 9 17:08:04 2013] Updating aperture counts using extracted products [Sun Jun 9 17:08:04 2013] Total counts from fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src101_src_b10.pi.gz = 1358.00 [Sun Jun 9 17:08:04 2013] Total counts from fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src101_bgd.pi.gz = 1760.00 [Sun Jun 9 17:08:04 2013] Got source and background scale factors 1163200.000000, 3132954.000000 [Sun Jun 9 17:08:04 2013] User source parameters: Position = (326.3, 231.9) = 12 42 38.43 2 38 4.4 Extent = 10.1 (10.1-10.1)", rotation angle = 0 Source aperture counts = 704.5 +/- 37.9 Background aperture counts = 653.5 Rate = 0.01 +/- 0.0007 [Sun Jun 9 17:08:07 2013] Calculating source flux in energy range 0.30-8.00 [Sun Jun 9 17:08:07 2013] Using photon index=1.80, rate=0.0134, arf fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src101.arf [Sun Jun 9 17:08:07 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun Jun 9 17:08:07 2013] Updating source flux to 4.8e-14 [Sun Jun 9 17:08:27 2013] Flag b found in src. 101 procflags, skipping spectral fitting [Sun Jun 9 17:08:27 2013] Flag c found in src. 101 procflags, skipping spectral fitting [Sun Jun 9 17:08:33 2013] xmm0111190701/analysis//spectral/fullrun_pn_xmm0111190701_pi300-10000_pass1_cl_src101_pl.csv not found, spectral fit skipped or did not complete